• 한국유체기계학회 논문집
• /
• 제4권3호
• /
• pp.7-13
• /
• 2001

The present study investigates convective heat/mass transfer and flow characteristics inside a cooling passage of rotating gas-turbine blades. The rotating duct has staggered ribs with $70^{\circ}$ attack angle, which are attached on leading and trailing surfaces. Naphthalene sublimation technique is employed to determine detailed local heat transfer coefficients using the heat and mass transfer analogy. Additional numerical calculations are conducted to analyze the flow patterns in the cooling passage. The present experiments employ two-surface heating conditions in the rotating duct because the exposed surfaces to hot gas stream are pressure and suction side surfaces in the middle passages of an actual gas-turbine blade. Secondary flows are generated by Coriolis and centrifugal forces in the spanwise and streamwise directions. The ribs attached on the walls disturb the mainflow resulting in recirculation and secondary flows near the ribbed wall. The local heat transfer and flow patterns in the passage are changed significantly according to rib configurations and duct rotation speeds. Therefore, the geometry and arrangement of the ribs are important for the advantageous cooling performance. The experimental results show that the ribs enhance the heat transfer more than $70\%$ from that of the smooth duct. The duct rotation generates the heat transfer discrepancy between the leading and trailing walls due to the secondary flows induced by the Coriolis force. The overal heat transfer pattern on the leading and trailing walls for the first and second passes are depended on the rotating speed, but the local heat transfer trend is affected mainly by the rib arrangements.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.327-330
• /
• 2006

This paper represents the numerical analysis on effects of radius ratio in a concentric annulus with a rotating inner cylinder. The numerical model consisted of two cylinder which inner cylinder is rotating and outer cylinder is fix, and the axial direction is used the cyclic condition because of the length for axial direction is assumed infinite. The diameter of inner cylinder is assumed 86.8mm, the numerical parameters are angular velocity and radius ratio. Also, the whole walls of numerical model have no-slip and the working fluid is used water at $20^{\circ}C$. The numerical analysis is assumed the transient state to observe the flow variations by time and the 3-D cylindrical coordinate system. The calculation grid adopted a non-constant grid for dense arrangement near the wall side of cylinder, the standard $k-{\omega}$ high Reynolds number model to consider the effect of turbulence flow and wall, the fully implicit method for time term and the quick scheme for momentum equation. The numerical method is compared with the experimental results by Wereley and Lueptow, and the results are very good agreement. As the results, TVF isn't appeared when Re is small because of the initial flow instability is disappear by effect of the centrifugal force and viscosity. The vortex size is from 0.8 to 1.1 for TVF at various $\eta$, and the traveling distance for wavy vortex have the critical traveling distance for each case.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.324-329
• /
• 2001

This experimental study concerns the characteristics of a transitional flow in a concentric annulus with a diameter ratio of 0.52, whose outer cylinder is stationary and inner one rotating. The pressure losses and skin-friction coefficients have been measured for the fully developed flow of $0.1\sim0.4%$ aqueous solution of sodium carbomethyl cellulose (CMC), respectively at inner cylinder rotational speed of $0\sim600rpm$. The transitional flow has been examined by the measurement of pressure losses to reveal the relation of the Reynolds and Rossby numbers with the skin-friction coefficients. The present results show that the skin-friction coefficients have the significant relation with the Rossby numbers, only for laminar regime. The occurrence of transition has been checked by the gradient changes of pressure losses and skin-friction coefficients with respect to the Reynolds numbers. The increasing rate of skin-friction coefficients due to the rotation in uniform for laminar flow regime, whereas it is suddenly reduced for transitional flow regime and, then, is gradually declined for turbulent flow regime. Consequently, the critical(axial-flow) Reynolds number decrease as the rotational speed increases. Thus, the rotation of inner cylinder promotes the early occurrence of transition due to the onset of taylor vortices.

• 대한기계학회논문집A
• /
• 제39권10호
• /
• pp.1045-1052
• /
• 2015

본 논문은 장거리 탐지 레이더(LRSR;Long Range Surveillance Radar) 회전 구동 안정화에 관한 내용으로, 외란에 강인한 제어기 설계에 관한 것이다. 외란에 강인한 제어기 설계를 위하여 시스템 동특성과 외란 요소를 분석하고 그에 대한 수학적 모델링을 수행한다. 탐지레이더는 바람이 강한 높은 지대에 설치되는 특성과 넓은 안테나면을 갖는 형상적인 특성을 감안하였을 때 주 외란 요소는 풍속을 들 수 있다. 풍속은 베어링의 마찰을 증가시키는 요소로 작용하고 이는 안정화 성능을 저해 한다. 풍속이 탐지레이더에 미치는 영향은 전산유체역학(CFD;Computational Fluid Dynamics) 해석 결과를 이용한다. 전산유체역학 해석 결과를 제어알고리즘의 외란 입력으로 구성하여 제어기법에 대한 안정화 성능을 시뮬레이션과 실험을 통하여 기술한다. 플랜트 모델링 및 제어기는 Matlab / Simulink 를 이용하여 구성한다.

• 한국전산유체공학회지
• /
• 제18권4호
• /
• pp.74-81
• /
• 2013

A numerical design analysis is conducted to search for an optimal shape of outlet in a rotating-disk CVD reactor. The goal is to suppress flow recirculation that has been found in a reactor having a sudden expansion of flow passage outside of the rotating disk. In order to streamline gas flow, the sidewall at which the flow in the Ekman layer is impinged, is tilted. The axisymmetric laminar flow and heat transfer in the reactor are simulated using the incompressible ideal gas model. For the conventional vertical sidewall, the flow recirculation forming in the corner region could be expanded into the interior to distort the upstream flow. The numerical results show that this unfavorable phenomenon inducing back flow could be dramatically suppressed by tilting the sidewall at a certain range of angle. The assessment of deviation in deposition rate based on the characteristic isotherm illustrates that the sidewall tilting may expand the domain of stable plug-like flow regime toward higher pressure. A physical interpretation is attempted to explain the mechanism to suppress flow recirculation.

• 한국유체기계학회 논문집
• /
• 제13권5호
• /
• pp.43-53
• /
• 2010

This study investigates a design optimization of a rotating two-pass rectangular cooling channel with staggered arrays of pin-fins. The radial basis neural network method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer with shear stress transport turbulent model. The ratio of the diameter to height of the pin-fins and the ratio of the streamwise spacing between the pin-fins to height of the pin-fin are selected as design variables. The optimization problem has been defined as a minimization of the objective function, which is defined as a linear combination of heat transfer related term and friction loss related term with a weighting factor. Results are presented for streamlines, velocity vector fields, and contours of Nusselt numbers, friction coefficients, and turbulent kinetic energy. These results show how fluid flow in a two-pass square cooling channel evolves a converted secondary flows due to Coriolis force, staggered arrays of pin-fins, and a $180^{\circ}$ turn region. These results describe how the fluid flow affects surface heat transfer. The Coriolis force induces heat transfer discrepancy between leading and trailing surfaces, having higher Nusselt number on the leading surface in the second pass while having lower Nusselt number on the trailing surface. Dean vortices generated in $180^{\circ}$ turn region augment heat transfer in the turning region and in the upstream region of the second pass. As the result of optimization, in comparison with the reference geometry, thermal performance of the optimum geometry shows the improvement by 30.5%. Through the optimization, the diameter of pin-fin increased by 14.9% and the streamwise distance between pin-fins increased by 32.1%. And, the value of objective function decreased by 18.1%.

• 한국해양환경ㆍ에너지학회지
• /
• 제16권2호
• /
• pp.61-70
• /
• 2013

조류발전용 수직축터빈(VAT)의 3차원적인 유체동력학적 성능을 효과적으로 예측할 수 있는 연구를 진행하였다. 수치해석은 2차원과 3차원으로 수행하였으며 이를 통해 물리적 유동현상의 차이를 파악하였다. 3차원 효과는 주로 날개 끝단에서 발생하는 날개끝 보오텍스가 주된 원인으로서, 이로 인해 터빈 날개가 내어주는 양력이 손실되고 회전하는 터빈은 토크가 감소하였다. 이러한 현상은 본 연구에서 채택한 통상적인 수직축 터빈의 스팬-직경비 범위에서 상당한 수준으로 나타남을 확인하였다. 본 연구에서는 대상 터빈을 선정하고 2차원으로 성능해석 후 3차원 효과를 보정하는 비교적 간단하고 효과적인 방법을 제안하였다.

• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.32-40
• /
• 2002

희박상태나 극소장치에 관련된 기체운동을 해석하는 문제가 최근 중요한 연구주제로 부각되고 있다. 잘 알려진 DSMC와 더불어 모우멘트 기법, Chapman-Enskog 기법으로 분류되는 고차 비평형 유동 해석모델들이 이 문제에 적용되어 왔다. 본 연구에서는 Eu의 일반유체역학을 근간으로 이원자 기체에 관한 고차 해석모델을 개발하고자 한다. 회전 비평형 효과는 기체의 용적 점성계수에 관한 초과 수직응력을 고려하여 감안하였다. 개발된 계산모델을 일차원 충격파 내부구조와 단순 형상 외부의 희박 극초음속 유동장 해석에 적용하였다. 충격파 내부구조 및 전단유동 해석을 통해 회전 비평형에 의한 용적 점성계수 효과가 중요함을 확인하였다. 충격파 내부구조에 관한 이론적 예측이 실험과 잘 일치함도 확인하였다.

• 한국해양학회지:바다
• /
• 제5권2호
• /
• pp.77-85
• /
• 2000

회전반 유체실험을 이용하여 국지적 외력에 의한 순환특성을 모의하는 방법을 고찰하였다. 기존의 실험들은 균일한 외력에 의한 순환특성을 고려하였으나 한국 동해를 고려할 때 바람응력 컬의 남북 방향으로의 분포특성 및 해수면 열 손실의 북부해역에서의 존재를 근거로 공간적인 국지성 및 계절 변화를 염두에 둔 주기성을 복합적으로 모의할 수 있는 방법과 실험을 실시하였다. 바람응력 컬의 국지성은 에크만 층내 압력 경도력을 발생시켜 내부에도 같은 압력 경도력이 전달되어 지형류가 발생되게 하였으며 해수면 냉각을 위해서는 용기의 측면을 국지적으로 냉각시켜 자유표면을 유지할 수 있는 방법을 제시하였다. 남북에 위치한 두 개의 서로 다른 방향을 갖는 폐쇄순환과 서안경계류의 크기 및 이안 위치 변화등을 냉각효과 첨부시 및 응력 컬의 주기성을 갖는 경우를 택하여 실험적으로 관찰하였다.

• 한국유체기계학회 논문집
• /
• 제9권1호
• /
• pp.25-31
• /
• 2006

The present study investigates the effects of bleed flow on heat/mass transfer and pressure drop in a rotating channel with transverse rib turbulators. The hydraulic diameter $(D_h)$ of the square channel is 40.0mm. The bleed holes are located between the rib turbulators on leading surface and the hole diameter (d) is 4.5 mm. The square rib turbulators are installed on both leading and trailing surfaces. The rib-to-rib pitch is 10.0 times of the rib height(e) and the rib height-to-hydraulic diameter ratio $(e/D_h)$ is 0.055. The tests were conducted at various rotation numbers (0, 0.2, 0.4), while the Reynolds number and the rate of bleed flow to main flow (BR) were fixed at 10,000 and $10\%$, respectively. The results suggest that the heat/mass transfer characteristics in the internal cooling passage are influenced by rib turbulators, bleed flow and the Coriolis force induced by rotation. For the rotating ribbed passage with bleed flow, the heat/mass transfer on the leading surface is hardly affected by bleed flow, but that on the trailing surface decreases due to the diminution of main flow. The results also show that the friction factor decreases with the bleed flow.