• Journal of Practical Engineering Education
• /
• v.7 no.2
• /
• pp.107-112
• /
• 2015

In this paper, it was investigated academic achievement whether any differences in accordance with the teaching methods in the materials processing section in 'technology and home economics' curricular. Target groups were compared to the eighth grade and ninth grade junior high school. Both eighth and ninth grade were selected for the first time learning the material processing section. The eighth grade was lessoned using the educational media, but the ninth grade was lessoned using writing. The results from the six questions, in one educational media utilization class got 71.1% correct answers, the other groups got 45.3% correct answers. The average percent correct differences between the two groups showed 25.8% points improvement in academic achievement.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.244-251
• /
• 2015

The paper evaluates the effect of the physical property, fineness modulus (FM) and replacement ratio of crushed sand on the characteristics of concrete. This is intended to use crushed sand from Daegu-Kyungbuk region as the fine aggregate of concrete. The experimental result indicates that the replacement ratio of crushed sand needs to be less than 50% to satisfy the mixed gradation of both natural and crushed sand when their FMs are 2.0 and 3.2, respectively. The slump of concrete with crushed sand increased as the replacement ratio of crushed sand increased, while the workability of concrete with the replacement ratio of more than 75% was significantly reduced. The air content and bleeding rate of concrete was reduced as the replacement ratio increased. Furthermore, due to the enhancement of the concrete adhesive regardless of the FM of crushed sand, compressive strength of concrete tended to improve as the replacement ratio increased.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.5
• /
• pp.363-372
• /
• 2020

Dynamic compressive material properties at high strain rates is essential for improving the reliability of finite element analysis in dynamic environments, such as high-speed collisions and high-speed forming. In general, the dynamic compressive material properties for high strain rates can be obtained through SHPB equipment. In this study, SHPB equipment was used to acquire the dynamic compressive material properties to cope with the collision analysis of Woven tpye CFRP material, which is being recently applied to unmanned aerial vehicles. It is also used as a pulse shaper to secure a constant strain rate for materials with elastic-brittle properties and to improve the reliability of experimental data. In the case of CFRP material, since the anisotropic material has different mechanical properties for each direction, experiments were carried out by fabricating thickness and in-plane specimens. As a result of the SHPB test, in-plane specimens had difficulty in securing data reproducibility and reliability due to fracture of the specimens before reaching a constant strain rate region, whereas in the thickness specimens, the stress consistency of the specimens was excellent. The data reliability is high and a constant strain rate range can be obtained. Through finite element analysis using LS-dyna, it was confirmed that the data measured from the pressure rod were excessively predicted by the deformation of the specimen and the pressure rod.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.3
• /
• pp.147-160
• /
• 2010

The system virtualization shows interest in the consolidation of servers for the efficient utilization of system resources. There are many various researches to utilize a server machine more efficiently through the system virtualization technique, and improve performance of the virtualization software. These researches have studied with the activity to control the resource allocation of virtual machines dynamically focused on CPU, or to manage resources in the cross-machine using the migration. However, the researches of the memory management have been wholly lacking. In this respect, the use of memory is limited to allocate the memory statically to virtual machine in server consolidation. Unfortunately, the static allocation of the memory causes a great quantity of the idle memory and decreases the memory utilization. The underutilization of the memory makes other side effects such as the load of other system resources or the performance degradation of services in virtual machines. In this paper, we suggest the dynamic allocation of the memory in Xen to control the memory allocation of virtual machines for the utilization without the performance degradation. Using AR model for the prediction of the memory usage and ACO (Ant Colony Optimization) algorithm for optimizing the memory utilization, the system operates more virtual machines without the performance degradation of servers. Accordingly, we have obtained 1.4 times better utilization than the static allocation.

• Management & Information Systems Review
• /
• v.38 no.4
• /
• pp.79-93
• /
• 2019

This study analyzed the information effect of KOSPI200 market and KOSPI200 futures market and volume synchronized probability of informed trading (VPIN). The data period is 760 days from July 8, 2015 to August 9, 2018, and the intraday trading data is used based on the trading period of the KOSPI 200 Index. The findings of the empirical analysis are as follows. First, as a result of regression analysis of the same parallax, when the level of VPIN is high, the return and volatility of KOSPI200 are high. Second, the KOSPI200 returns before and after the VPIN measurement and the return of the KOSPI200 future had a positive relationship with the VPIN. The cumulative returns of KOSPI200 futures were positive for about 15 minutes.Finally, we find that portfolios with high levels of VPIN showed high KOSPI200 and KOSPI200 futures return. These results confirmed the applicability of VPIN as a trading strategy index. The above results suggest that KOSPI200 and KOSPI200 futures markets will be able to explore volatility and price changes, and also be useful indicators of financial market risk.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.638-644
• /
• 2018

Relay systems have recently gained attentions because of its capability of cell coverage extension and the power gain as the one of key technologies for 5G. Relays can be exploited for small-cell base stations and the autonomous network, where communication devices communicate with each other cooperatively. Therefore, the relay technology is expected to enable the low power and large capacity communication. In order to maximize the benefits of using a limited number of relays, the efficient relay selection method is required. Especially, when two nodes exchange their data with each other via relay, the relay selection can maximize the average data rate by the spatial location of the relay. For this purpose, the average data rate is analyzed first according to the relay selection. In this paper, we analyzed the average data rate when two nodes exchange their data via dual-hop decode and forward relaying considering the interference by the concurrent transmission under Nakagami-m fading channel. The correctness of the analysis is verified by the Monte Carlo simulation. The results show that the concurrent transmission is superior to the non-concurrent transmission in the high required data rate region rather than in the low required data rate region.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.649-659
• /
• 2022

This study examined the granite, quartzite, phyllite, schist, and gneiss as aggregate resources among the original rock distributed in the Chungju-Goesan area. The granite distributed in the study area is mainly composed of Jurassic biotite granite, and the quartzite layer is from the Daehyangsan quartzite Formation distributed on the upper part of the Gyemyeongsan Formation and the Hyangsan-ri dolomitic limestone Formation. In addition, phyllite is pophyrytic phyllite-schist from the Hwanggangri Formation of the Okcheon group, schist is chlorite schist, from the Munjuri Formation of the Okcheon group, and gneiss is porphyroblastic gneiss which is the upper part of the Seochangri Formation. Aggregate quality evaluation factors of these rocks included fineness modulus, absorption, unit weight, absolute dry density, solid content, porosity, resistance to abrasion, and soundness. In the case of granite, it was found to be partially unsatisfactory in terms of unit weight, solid content, porosity, and resistance to abrasion. Gneiss was found to be out of the standard values in resistance to abrasion and schist in porosity and solid content. As for the overall quality of aggregate resources, it was analyzed that quartzite, gneiss, and phyllite showed excellent quality. Aggregate quality tests are performed simply for each rock, but the rock may vary depending on the morphology of the mineral. Therefore, when analyzing and utilizing the quality evaluation of aggregate resources, it will be possible to use them more efficiently if the rock-mineralological research is performed together.

• The Korean Journal of Applied Statistics
• /
• v.31 no.1
• /
• pp.77-96
• /
• 2018

A reverse mortgage provides a pension until the death for the insured or last survivor. Long-term risk management is important to estimate the contractual period of a reverse mortgage. It is also necessary to study prediction methods of mortality rates that appropriately reflect the improvement trend of the mortality rate since the extension of the life expectancy, which is the main cause of aging, can have a serious impact on the pension financial soundness. In this study, the Lee-Carter (LC) model reflects the improvement in mortality rates; in addition, multiple life model are also applied to a reverse mortgage. The mortality prediction method by the traditional LC model has shown a dramatic improvement in the mortality rate; therefore, this study suggests mortality projection based on the projection of the skewness for the mortality that has been applied to appropriately reflect the improvement trend of the mortality rate. This paper calculates monthly payments using future mortality rates based on the projection of the skewness of the mortality. As a result, the mortality rates based on this method less reflect the mortality improvement effect than the mortality rates based on a traditional LC model and a larger pension amount is calculated. In conclusion, this method is useful to forecast future mortality trend results in a significant reduction of longevity risk. It can also be used as a risk management method to pay appropriate monthly payments and prevent insufficient payment due to overpayment by the issuing institution and the guarantee institution of the reverse mortgage.

• Water for future
• /
• v.45 no.8
• /
• pp.8-14
• /
• 2012

• Magazine of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.70-78
• /
• 2011