Abstract
The paper evaluates the effect of the physical property, fineness modulus (FM) and replacement ratio of crushed sand on the characteristics of concrete. This is intended to use crushed sand from Daegu-Kyungbuk region as the fine aggregate of concrete. The experimental result indicates that the replacement ratio of crushed sand needs to be less than 50% to satisfy the mixed gradation of both natural and crushed sand when their FMs are 2.0 and 3.2, respectively. The slump of concrete with crushed sand increased as the replacement ratio of crushed sand increased, while the workability of concrete with the replacement ratio of more than 75% was significantly reduced. The air content and bleeding rate of concrete was reduced as the replacement ratio increased. Furthermore, due to the enhancement of the concrete adhesive regardless of the FM of crushed sand, compressive strength of concrete tended to improve as the replacement ratio increased.
본 연구는 대경권 지역에서 생산되는 부순모래를 콘크리트용 잔골재로 활용하기 위하여 물리적 특성 및 부순모래의 조립률과 치환률이 콘크리트의 특성에 미치는 영향을 검토하였다. 실험결과 천연사의 조립률이 2.0정도이고, 부순모래 조립률이 3.2이상인 경우 천연사와 부순모래의 합성입도를 만족시키기 위한 부순모래의 치환률은 50% 이하가 적당한 것으로 나타났다. 부순모래를 사용한 콘크리트는 부순모래의 치환률이 증가할수록 슬럼프는 증가하는 것으로 나타났으나, 부순모래의 치환률 75% 이상에서는 현저한 워커빌리티 저하현상을 나타내었다. 또한 부순모래를 사용한 콘크리트의 공기량 및 블리딩은 부순모래 치환률이 증가할수록 감소하였으며, 콘크리트 압축강도는 부순모래 조립률에 관계없이 시멘트페이스트와 골재간의 부착력 증진에 기인하여 치환률이 증가할수록 증가하는 경향을 나타내었다.