• Journal of KIISE
• /
• v.42 no.3
• /
• pp.281-288
• /
• 2015

A volcano disaster damage prediction system supports decision making for counteracting volcanic disasters by simulating meteorological condition and volcanic eruptions. In this system, a program called Fall3D generates predicted results for the diffusion of ash after a volcanic eruption on the basis of meteorological information. The relevant meteorological information is generated by a weather numerical prediction model known as Weather Research & Forecasting (WRF). In order to reduce the entire processing time without modifying these two simulation programs, pipelining can be used by partly executing Fall3D whenever the hourly (partial) results of WRF are generated. To reduce the processing time, successor programs such as Fall3D require that certain features be suspended until the part of the results that is based on prior calculation is generated by a predecessor. Even though Fall3D does not have a suspend or resume feature, pipelining effect can be produced by using the program's restart feature, which resumes simulation from the previous session. In this study, we suggest a workflow that can control the execution type.

• Journal of KIISE:Information Networking
• /
• v.34 no.1
• /
• pp.73-80
• /
• 2007

This paper presents an approach to support dynamic QoS(Quality of Service) requirements of largely emerging SIP(Session Initiation Protocol) multimedia applications in broadband access networks. The topology of QoS-enabled broadband access networks and its operational model to support SIP QoS are firstly suggested. And then the procedures to bind QoS-enabled SIP signaling into an IP QoS mechanism are presented. In this paper, DiffServ-based IP QoS architecture is deployed due to the complexity problem of the other IntServ architecture, and COPS(Common Open Policy Service) and COPS-PR protocol based signaling mechanisms are used to support dynamic DiffServ QoS, correspondent with dynamic SIP QoS. The broadband access network is assumed to support rapidly expanding Metro Ethernet 802.1 D/Q QoS, and how to translate SIP QoS parameters into IP DiffServ classes and DiffServ classes into 802.1 D/Q QoS parameters is also presented in this paper.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.125.2-125.2
• /
• 2011

CuInGaSe2 (CIGS)을 포함한 Chalcopyrite계 물질은 직접천이형 반도체이면서, ${\sim}1{\times}10^5cm^{-1}$ 이상의 광흡수계수를 보이며, 조성제어를 통한 밴드갭 조절이 가능해 차세대 고효율 박막태양전지재료로 매우 주목받고 있다. 최근, CIGS 박막태양전지 제조를 위해 CIGS 흡수층의 여러 가지 박막제조 공정들이 개발되고 있으나, 동시증착법과 소위 2단계법이라 일컬어지는 금속 전구체 스퍼터링 증착 후 셀렌화 공정을 가장 대표적인 공정이라 말 할 수 있다. 동시증착법은 실험실 수준의 소면적 셀에서 20%에 가까운 높은 효율의 CIGS 박막태양전지 제조에 성공하였음에도 불구하고, 상용화를 위한 대면적 셀 제조를 위해 해결해야 할 문제들이 아직 남아있다. 또한, 2단계법의 경우는 스퍼터링 공정을 기반으로 대면적 셀 제조에는 용이하나, CIGS/Mo 계면에서의 Ga 응집현상의 발생 및 셀렌화 공정에 사용되는 독성가스($H_2Se$)의 문제 등이 남아 있어 새로운 시각에서의 접근 방법이 요구되고 있다. 본 연구에서는 CIGS 4성분계 단일 타겟을 사용, RF 스퍼터링 공정을 통해 $200{\times}200mm^2$ 기판 위에 CIGS 박막을 제조하여 그 특성을 분석하였다. XRD 분석결과, 동시증착법에서 일반적으로 관찰되는 CIGS/Mo 계면에서의 $MoSe_2$ 상의 존재는 관찰되지 않았으며, CIGS 단일상의 다결정 박막이 제조되었음을 알 수 있었다. 또한, CIGS 박막제조 후, RTA 공정을 통해 CIGS 박막의 결정성이 향상됨을 관찰 할 수 있었으며, SIMS 분석결과, Mo층의 공정 조건에 따라 CIGS/Mo 계면에서의 금속원소 (In, Ga, Mo)의 상호확산이 크게 억제됨을 알 수 있었다. 그 외의 특성평가 결과들을 통하여 CIGS 4성분계 단일 타겟을 사용한 CIGS 박막태양전지 제조의 유용성에 대해 논의하고자 한다.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.30-30
• /
• 2011

국내의 내진설계 기준은 1988년에 처음 도입되었으며, 최근 점차 강화되고 있는 실정이다. 공동주택에 주로 적용되는 전단벽식 구조시스템에서 증가된 지진력에 저항하기 위해서는 벽량과 철근이 증가하게 되어 공사비가 상승하게 된다. 이러한 단점을 보완하기 위한 제진설계의 필요성이 대두되고 있는 실정인데, 기존의 제진장치는 주로 가새형 또는 벽체형을 대부분이라 평면계획에 제약이 있다. 따라서 전단벽식 구조의 공동주택의 제진설계 시에는 우리나라와 같은 중 약진 지역에 적합하고 저렴한 비용으로 충분한 내진성능과 평면의 가변성을 확보할 수 있는 댐퍼의 선택이 필요하다. 본 연구의 목적은 기존의 가새형 및 벽체형 제진장치의 국내 공동주택 적용시의 문제점인 평면의 가변성 확보에 유리하고, 수동형 제진장치의 장점을 추구할 수 있는 마찰댐퍼를 삽입한 커플링보 제진시스템의 내진성능을 조사하는 것이다. 내진성능을 평가하기 위해서 실대형 커플링보 실험체를 계획하고 제작하였다. 실험체는 2개로 구성되어 있으며, 하나는 기존의 철근배근 상세를 갖는 철근콘크리트 커플링보 실험체와 커플링보에 마찰댐퍼가 삽입된 실험체이다. 횡하중에 대한 성능을 평가하기 위해서 유사정적 반복가력실험을 실시하였다. 엑츄에이터로부터 실험체 상보의 가력지그를 통해 하중이 전달되도록 하였으며, 가력은 최초 0.25%의 층간변형각부터 변위제어를 통해 목표 층간변형각인 1.5% 이상까지 진행되도록 하였다. 실험결과, 두 실험체의 이력곡선과 에너지 흡수능력을 평가하였다. RC 실험체는 핀칭현상이 관찰되었고, 가력이 진행됨에 따라 커플링보와 벽체에서의 균열이 확산되어 종국적으로 취성적인 커플링보의 전단파괴가 발생하였다. 마찰댐퍼를 삽입한 실험체는 계획된 마찰거동이 잘 발휘되어 목표 층간변형각인 1.5%까지 이선형거동이 잘 나타났다. 최대 내력은 RC 실험체가 3배 이상 크지만, 누적층간변형각에 따른 에너지 흡수능력은 마찰댐퍼 실험체가 2배 이상 우수한 결과를 보였으며, 커플링보 및 벽체에서의 균열이 매우 저감되었다.

• Journal of Food Hygiene and Safety
• /
• v.31 no.6
• /
• pp.471-475
• /
• 2016

Salmonella Typhimurium (S. Typhimurium) is one of the common food pathogens which may cause gastroenteritidis in human and animals. The microorganism also causes the economic loss in animal farming and food industry. In this study, the disinfection efficacy of a powder disinfectant containing phosphate compounds as a main ingredient, was evaluated against S. Typhimurium. A bactericidal efficacy test by broth dilution method was used to determine the lowest effective dilution of the disinfectant following exposure to test bacteria for 30 min at $4^{\circ}C$. The disinfectant and test bacteria were diluted with hard water (HW) or organic matter suspension (OM) according to treatment condition. On HW and OM conditions, the bactericidal activity of the disinfectant against S. Typhimurium was 4- and 2-fold dilutions, respectively. As the disinfectant composed to phosphate compounds possesses bactericidal efficacy against pathogenic bacteria such as S. Typhimurium, the powder disinfectant can be used to control the spread of bacterial diseases.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.837-847
• /
• 2019

Korea's long underground roads are being promoted around the metropolitan city center to realize advanced transportation networks. Many disaster prevention facilities are applied to secure fire safety of the closed and long-distance underground roads. As the facility response and fire suppression subjects are unclear, additional human and material damages from fire spread are inevitable. Therefore, in this study, we developed a remote automatic fire extinguishing system that uses the fire extinguishing water inside the fire hydrant to monitor the CCTV in the management room and sprays it directly to the fire site through automatic control. The design application method was studied through the performance improvement that can be put into practical use.

• Journal of Advanced Navigation Technology
• /
• v.22 no.1
• /
• pp.37-42
• /
• 2018

Recently, there have been many studies on the IoT environment in which the sensors attached to the equipment automatically transmit and process the site information in real time through the network to control the equipment. The core of such a system is a network for data transmission and reception, and a wired network with wide transmission distance is a priority. However, in the case of a wired network, there is a problem that the time and cost consumed to configure the communication is higher than that of the wireless. In this paper, we propose LPWA - based wireless data transmission system using LPWA and BLE communication to solve this problem. The proposed system collects data from equipment through BLE and transmits data to the server using LPWA. Experimental results show that the spreading factor of maximum length of LPWA is 8, and the minimum length is 9.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.4
• /
• pp.22-32
• /
• 2001

In this paper, we propose an average acquisition time and hardware design of high speed PN code synchronous acquisition system using DMF(Digital Matched Filter) with new switching method in DS-SS/CDMA(Direct Sequence Spread Spectrum Code Division Multiple Access). In reality, the PN code synchronous acquisition system using DMF has very complicated hardware, high cost and high power consumption. The PN code synchronous acquisition system using proposed switching method DMF can overcome those disadvantages. Therefore, we can make hardware simple and obtain low power and high density by reducing the area by 1/5 against the conventional approaches of using either the matched filters or the serial correlators. The proposed system architecture is also simple and easily controllable since there is no square-term circuit after execution of digital filtering.

• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.186-195
• /
• 1999

In this paper, the RF-modules composed of front-end, frequency synthesizer, modulator/demodulator and power control multi channel WLL personal system for W-CDMA using 10 [MHz] RF channel bandwidth has been implemented and considered. The measured transmission power is 250 [mW] which is very close to the required value. The measured flatness of power at the final output stage is ${\pm}1.5[dB]$ over the required bandwidth of the receiver. In addition, it is found that the chip rate transmitting spread signal is set to 8.192 [MHz], the required rate. The frequencies of RF_LO signal and LO signal of the modulator and the demodulator measured by a frequency synthesizer are satisfied with design requirements. The operating range of the receiving strength signal indicator and AGC units shows 60 [dB] respectively. Also the measured phasor diagram and eye pattern for deciding the RF modules compatible with baseband digital signal processing part are shown good results.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.77-84
• /
• 2014

In this paper, we propose the hierarchical network synchronization scheme that is backward compatible for the existing commercial system, efficient for total system performance, and whose hardware modification is minimized. This system performance is, the relationship among bandwidth efficiency, complexity and MODEM performance, and superiority of network system applicability. The proposed structure can remedy the high hardware complexity and the lower accuracy of network sychronization that the existing satellite communication terminal system in the star network based on TDM/MF-TDMA of DVB-S2/RCS standards has. Besides, It has high efficiency in view of cost and system performance if the system designed for satellite broadcast requires system upgrade. In the body section, its hardware complexity and system performance of the proposed algorithm is analysed theoretically and treated with the related parameters(symbol rate, spreading factor, etc.) and the BER performance of control channel through the computer simulation for its verification that it can be applied for communications system.