• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.39-47
• /
• 2006

The evaluation of MDx family hash functions such as MD5 is difficult because the design background or a generalized model is unknown. In this paper, an approximated model is proposed to generalize hash functions. The diffusion of a input difference is tested by an approximated model for MD5. The results show that MD5 does not provide perfect diffusion, so MD5 is weak against some attacks. We propose a multiple chaining pattern which provides perfect diffusion in approximated model of hash function without extra calculation or memory. And We show the probability of differential characteristics of our proposal.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.271-271
• /
• 2011

본 논문에서는 W-N 확산 방지막을 각각 다른 질소 유입 조건 (0 sccm, 0.5 sccm, 1 sccm) 하에 Si (Silicon) (100) 기판 위에 rf (radio-frequency) magnetron sputter를 이용하여 증착하였다. 증착된 박막은 800$^{\circ}C$에서 열처리하였고, 이때 각각의 W-N 확산 방지 막의 열적 안정성을 분석하였다. 기존 W-N박막의 분석은 X-ray diffraction (XRD)와 같은 분광학적 방법을 사용하여 분석하였으나, 이는 점점 미세화 되어가는 반도체 산업의 최근 동향에는 적합하지 않다. 따라서 이번 실험에서는 박막 국부적인 영역에서 nano scale의 분석이 가능한 nano indentation을 이용하여 분석하였다. 본 연구에서는 열적 안정성을 분석하기 위하여 각각 열처리 온도가 다른 박막의 stress 분포를 XRD와 AFM를 이용하여 구한 격자상수로 먼저 박막 전체적인 영역을 분석하였다. 박막의 국부적인 영역은 앞서 언급하였던 nano indentation을 이용하여 stress 분포를 분석하였다. 실험 결과, 표면의 RMS roughness는 3.6에서 1.4 nm으로 변하였으며, 박막은 미열처리에서 열처리 온도의 증가 시 보다 tensile stress를 많이 받는 것으로 분석하였다.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.64-68
• /
• 2010

In this paper, we studied the novel synchronization algorithm for cooperative communication system over fading. We research mainly on the decode-and-forward scheme. Also, we inserted spreading sequence in origin data frame to control efficiently data synchronization. In mobile station, inserted spreading sequence in data frame passed through the corelation process. We had decide the delay value of received data through result of correlation process. In simulation, We applied that channel gain of three node had different value in various fading environment. Finally we will be possible to control the received data synchronization using result of corelation value in each node between relay to mobile station and base station to mobile station. The results of this paper can be applicable to the cooperative systems.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.33-39
• /
• 2008

Void fraction of air bubble in the seagrass bed by photosynthesis was estimated with sound speed dispersion. A field experiment was conducted at Seagrasss bed of which bottom type is sandy mud and 120 kHz CW waveform was transmitted to obtain backscattered signals from seagrass bed. The differences of the arrival time of received signal from seagrass bed were observed between day and night. The diurnal variation of arrival time was caused by sound speed dispersion of air bubble generated by photosynthesis of seagrass.

• Water for future
• /
• v.50 no.6
• /
• pp.58-65
• /
• 2017

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.481-490
• /
• 2012

Evaluation of chloride penetration is very important, because induced chloride ion causes corrosion in embedded steel. Diffusion coefficient obtained from rapid chloride penetration test is currently used, however this method cannot provide a correct prediction of chloride content since it shows only ion migration velocity in electrical field. Apparent diffusion coefficient of chloride ion based on simple Fick's Law can provide a total chloride penetration magnitude to engineers. This study proposes an analysis technique to predict chloride penetration using apparent diffusion coefficient of chloride ion from neural network (NN) algorithm and time-dependent diffusion phenomena. For this work, thirty mix proportions with the related diffusion coefficients are studied. The components of mix proportions such as w/b ratio, unit content of cement, slag, fly ash, silica fume, and fine/coarse aggregate are selected as neurons, then learning for apparent diffusion coefficient is trained. Considering time-dependent diffusion coefficient based on Fick's Law, the technique for chloride penetration analysis is proposed. The applicability of the technique is verified through test results from short, long term submerged test, and field investigations. The proposed technique can be improved through NN learning-training based on the acquisition of various mix proportions and the related diffusion coefficients of chloride ion.

• Journal of the Korean Vacuum Society
• /
• v.6 no.2
• /
• pp.143-150
• /
• 1997

In this study, doffusion barrier properties of 1000 $\AA$ thick molybdenum compound(Mo, Mo-N, $MoSi_2$, Mo-Si-N) films were investigated using sheet resistance measurement, X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), Scanning electron mircoscopy(SEM), and Rutherford back-scattering spectrometry(RBS). Each barrier material was deposited by the dc magnetron sputtering and annealed at 300-$800^{\circ}C$ for 30 min in vacuum. Mo and MoSi2 barrier were faied at low temperatures due to Cu diffusion through grain boundaries and defects in Mo thin film and the reaction of Cu with Si within $MoSi_2$, respectively. A failure temperature could be raised to $650^{\circ}C$-30 min in the Mo barrier system and to $700^{\circ}C$-30 min in the Mo-silicide system by replacing Mo and $MoSi_2$ with Mo-N and Mo-Si-N, respectively. The crystallization temperature in the Mo-silicide film was raised by the addition of $N_2$. It is considered that not only the $N_2$, stuffing effect but also the variation of crystallization temperature affects the reaction of Cu with Si within Mo-silicide. It is found that Mo-Si-N is the more effective barrier than Mo, $MoSi_2$, or Mo-N to copper penetraion preventing Cu reaction with the substrate for $30^{\circ}C$min at a temperature higher than $650^{\circ}C$.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.62-69
• /
• 2023

For the nuclear power concrete plant structures in the UAE, it is necessary to consider the deterioration from high sulfate ions in the atmosphere and high chloride ions from the coast. In this study, two strength grade concrete mixture (40 MPa and 27 MPa) and two curing/diffusion temperatures (20 ℃ and 50 ℃) were considered for evaluating the temperature effects on diffusion and strength due to high average temperature above 38 ℃ a year in UAE. When the initial curing temperature was high, the compressive strength increased in high-temperature curing to 7 days, but the strength slightly increased in the 20 ℃ curing condition at 28 days. Regarding diffusion test, unlike the compressive test results, reduced chloride diffusion coefficients were evaluated both in 40 MPa and 27 MPa grade at 28 days. In the case of 91 days of curing, an increase in diffusivity due to high temperature and a decrease in diffusivity due to age effect occur simultaneously. Compared to the results of the curing and diffusion tests at 20 ℃ and 28 days, when the curing and diffusion tests were conducted at 50 ℃ in 91 days, the diffusion coefficients decreased to 76.2 % in 40 MPa grade and 85.4 % in 37 MPa grade with increasing curing period, respectively.

• Journal of the Korean Institute of Gas
• /
• v.16 no.4
• /
• pp.23-31
• /
• 2012

The basic understanding of gas diffusion and technology to predict the diffusion phenomena are needed to prepare against a disaster of leakage of natural gas and to design better consistent and reliable gas supply system in enclosure. The experimental results of British Gas Technology Co. are used in present study as a reference of theoretical study using CFD. The present results of 2D CFD analysis for mass flow rate of nozzle release show good agreement with experimental results within 2.6 % error. 3D CFD analysis for the characteristics of natural gas diffusion in enclosure with various ventilation patterns also gives reasonable agreement with experimental results.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.1
• /
• pp.53-58
• /
• 2007

In an estuary, mixing and transport of contaminant sometimes occurs in the salt finger favorable condition (Hwang ang Rehmann, 2004). Linearized theory is applied to predict flow dynamics in salt finger favorable condition. The simulated results match well with previous laboratory experiments. When the density ratio is larger than 2, the heat and salt system shows $0.55{\sim}0.57$ as Turner (1967) found, and the salt and sugar system produces 0.87 of Griffiths (1980). As the ratio of molecular diffusivities of two scalars increases, the flux ratio increases. The flux and eddy diffusivity ratios decrease with increase of density ratio, and it takes longer time for flux ratio to be steady state at the higher density ratios.