• The KIPS Transactions:PartC
• /
• v.10C no.5
• /
• pp.617-624
• /
• 2003

This paper proposes a modified DCPC (Distributed Constrained Power Control, M-DCPC) algorithm that can improve the performance of a CDMA power control system. The control performance of the proposed method is verified using two performance measures : the SIR response of each mobile and the outage probability in a cell. As regards the SIR response, in simulations, the M-DCPC algorithm has shown a faster convergence and lower overshoot in transient time than the other power control algorithms when the desired SIR value was varying. For the outage probability. M-DCPC converged to a fixed outage rate faster than CSOPC while also maintaining the system capacity to make as high a connection as CSOPC. In particular, when the desired SIR was varying, CSOPC showed an abrupt outage probability increase during the desired SIR Increase, yet M-DCPC was unaffected.

• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.42-48
• /
• 2003

In system planing and operation, voltage and reactive power control is very important. The voltage deviation and system losses can be reduced through control of reactive power sources. In general, there are several different reactive power sources, we used switched shunt capacitor to improve the voltage profile and to reduce system losses. Since there are many switched shunt capacitors in power system, so it if necessary to coordinate these switched shunt capacitors. In this study, Genetic Algorithm (GA) is used to find optimal coordination of switched shunt capacitors in a local area of power system. In case study, the effectiveness of the proposed method is demonstrated in KEPCO's power system. The simulation is performed by PSS/E and the results of simulation are compared with sensitivity method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1013-1021
• /
• 2004

In the WCDMA mobile multimedia communication system, the adaptive array antenna IS adopted to improve the performance of the system by reducing inter-user interference using antenna beam control. Usually, the interference resulted from the higher data rate users is much more significant to the lower data rate users than the other way around, so the overall performance can be enhanced by reducing the interference from higher data rate users. In order to maximize the efficiency of adaptive antenna operation, an optimal call admission control, especially during handoff, adaptive to the data rates is a critical problem. In this paper, We propose a call admission control algorithm based on the Soft QoS concept for the efficient processing of the handoff of higher data rate calls, and an adaptive handoff control mechanism according to the data rates. The proposed algorithm has been evaluated by computer simulation that it accommodates high data rate users among many lower data rate users much better, and the average call blocking probability for lower rate users becomes much lower than the conventional call admission control algorithm.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.473-480
• /
• 2008

We have investigated the optimal growth conditions of carbon nanotubes (CNTs) using the chemical vapor deposition and the Ni nanoparticle arrays. The diameter of the CNT is shown to be controlled down to below 20 nm by changing the size of Ni particle. The position and size of Ni particles are controlled continuously by using wafer-scale compatible methods such as lithography, ion-milling, and chemical etching. Using optimal growth conditions of temperature, carbon feedstock, and carrier gases, we have demonstrated that an individual CNT can be grown from each Ni nanoparticle with almost 100% probability over wide area of $SiO_2/Si$ wafer. The position, diameter, and wall thickness of the CNT are shown to be controlled by adjusting the growth conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1873-1880
• /
• 2016

Most of the energy used to operate a cellular network is consumed by a base station (BS), and reducing the transmission power of a BS is required for energy-efficient cellular networks. In this paper, a distributed transmit power control (TPC) algorithm is proposed based on the flocking model to improve the energy efficiency of a cellular network. Just as each bird in a flock attempts to match its velocity with the average velocity of adjacent birds, in the proposed algorithm each mobile station (MS) in a cell matches its rate with the average rate of the co-channel MSs in adjacent cells by controlling the transmit power of its serving BS. Simulation results show that the proposed TPC algorithm follows the same convergence properties as the flocking model and also effectively reduces the power consumption at the BSs while maintaining a low outage probability as the inter-cell interference increases. Consequently, it significantly improves the energy efficiency of a cellular network.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.6
• /
• pp.75-81
• /
• 2012

This paper has proposed Message Count Control Mechanism based Link State Update(LSU) Algorithm that has not had a strong influence on the depreciation of QoS routing performance. Most existing LSU algorithms have the limit that cannot control the count of LSU message. Especially, adaptive algorithms have a bad performance when traffic are excessive and fickle. We classify as the importance of LSU message that have a influence on available bandwidth and determine the transmission of the message according to update rate per a unit of time. We have evaluated the performance of the proposed model and the existing algorithms on MCI simulation network using the performance metric as the QoS routing blocking rate and the mean update rate per link, it thus appears that we have verified the performance of this algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9A
• /
• pp.891-899
• /
• 2008

The cdma2000 1xEV-DO system controls the data rates of mobile terminals based on a binary overload indicator from the base station and a simple probabilistic model. However, this traffic control scheme has difficulty in controlling the reverse-link traffic load effectively and in guaranteeing a stable operation of the reverse link because each mobile terminal determines the next data rate autonomously. This paper proposes a new trafRc control scheme to improve the system stability, and analyzes the proposed scheme by modeling it as a discrete-time Markov process. The numerical results show that the maximum data rate of the proposed scheme is much higher than that of the conventional one. Moreover, the proposed scheme does not modify the standard physical channel structure, so it is compatible to the existing 1xEV-DO system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6260-6268
• /
• 2015

In LTE-Advanced that different networks coexist, it is considered that it is actually difficult to provide service continuity with a procedural and static control method applied to the existing voice service. This paper suggests Service Self-Organization to support the service continuity effectively based on SON. It means a method in which a subscriber's terminal collects information about its current condition and base station around, and a base station, through the data collected by monitoring inner or adjacent base station, shares related data and converges, controlling service continuity on its own. In other words, as context information of mobile terminal and base station changes, set-up of related functions such as ISHO, cell selection, source allocation, load control, and QoS mapping is adapted; each function fits into the change, exchanges the process of reorganization, and interacts; these actions go toward to satisfy service continuity. Simulation results show that it provides better performances than the conventional one with the measure of resource utilization rate and outage probability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.8
• /
• pp.558-565
• /
• 2019

A lot of studies on the survivability of missiles have been widely studied, since the technology of modern warships equipped with state-of-the-art defense systems has been improved. The survivability of missiles can be improved by attacking a target simultaneously using multiple missiles. For this reason, impact time control guidance (ITCG) laws have been widely studied. This paper deals with the effect of time-to-go estimate to ITCG laws. In this paper, two kinds of time-to-go estimate are first introduced in two-dimensional and three-dimensional environment and then ITCG laws are derived using the time-to-go estimate. Numerical simulations are performed to analyze the performance of the designed ITCG laws and the effect of time-to-go estimate is discussed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.4
• /
• pp.352-362
• /
• 2016

In this paper, a disposal maneuver which complies the space debris mitigation guideline was analysed for KOMPSAT-2 as an example of LEO satellite. Definition of disposal altitude which comply the '25 year rule', re-entry survivability analysis of KOMPSAT-2 parts inside and casualty area analysis were performed using STK and ESA's DRAMA. Finally, assuming that there were several survival objects during uncontrolled re-entry stage, the re-entry initial orbit elements which show the low casualty probability were found even if there were various uncertainties about the initial orbit. As a result, KOMPSAT-2 should be descended its altitude at least 43km or up to 105km to comply '25 year rule' and there were heavy or heat resistant survival objects which generated $4.3141m^2$ casualty area. And if RAAN of re-entry initial orbit was 129 degree, total casualty probability was lower than standard value of space debris mitigation guideline even if there were uncertainties about the initial orbit.