• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.91-96
• /
• 2021

This study was conducted to improve the operating conditions of an adsorption tower filled with potassium impregnated activated carbon for high hydrogen sulfide capture capacity. Heat treatment modified the surface properties of activated carbon, and ultimately determined its adsorption capacity. The activated carbon doped with potassium showed 57 times more adsorption at room temperature than that of using the raw adsorbent. It is believed that uniform pore formation and strong bonding of the potassium on the surface of carbon contributed to the chemical and physical absorption of hydrogen sulfide. The SEM analysis on the surface structure of various commercial carbons showed that the modification of surface properties through the heat treatment generated the destruction of pore structures resulted in the decrease of the absorption performance. The pressure drop across the activated carbon bed was closely related with the grain size and shape. The optimum size of irregularly shaped activated carbon granules was 2~4 mesh indicating economical feasibility.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.1
• /
• pp.3-10
• /
• 2016

Effects of acid ($HNO_3$ and HCl) modification on the adsorption properties of Pb(II) and Cu(II) onto bamboo-based activated carbon (BAC) were investigated through a series of batch experiments. The carbon content increased and oxygen content decreased with acid treatment. $HNO_3$ induced carboxylic acids and hydroxyl functional groups while HCl added no functional group onto BAC. The pseudo-second order model better described the kinetics of Pb(II) and Cu(II) adsorption onto experimented adsorbents, indicating that the rate-limiting step of the heavy metal sorption is chemical sorption involving valency forces through sharing or exchange of electrons between the adsorbate and the adsorbent. The equilibrium sorption data followed both Langmuir and Freundlich isotherm models. The adsorption capacities of BAC were affected by the surface functional groups added by acid modification. The adsorption capacities were enhanced up to 36.0% and 27.3% for Pb(II) and Cu(II), respectively by the $HNO_3$ modification, however, negligibly affected by HCl.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.454-462
• /
• 2011

A study on the adsorption characteristics of Pb(II) and Cr(III) cations onto C-methylcalix[4]resorcinarene (CMCR) has been conducted. CMCR was produced by one step synthesis from resorcinol, acetaldehyde, and HCl. Most parameters in batch system confirm that CMCR is a good adsorbent for Pb(II) and Cr(III). Cr(III) uptake was bigger than that of Pb(II), but Cr(III) adsorption rate was slower than Pb(II). The adsorption kinetic of Pb(II) and Cr(III) adsorptions in batch followed pseudo $2^{nd}$ order kinetics model, but the kinetic of Pb(II) adsorption in fixed bed column system followed first order model. Desorption studies to recover the adsorbed Pb(II) was performed sequentially with distilled water and HCl, and the results showed that the adsorption was dominated by chemisorption.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.69-76
• /
• 2008

To estimate removal ability of harmful gas by charcoal, we carbonized Red oak (Quercus mongolica Fischer) wood and Larch (Larix leptoepis) bark at $300^{\circ}C$, $600^{\circ}C$ and $900^{\circ}C$ for 1 hour. Gas removal ratios was increased with carbonization temperature but there is no difference between wood and bark charcoal. In the case of bad smell and VOC gas, woody charcoal including bark charcoal carbonized at $300^{\circ}C$ showed low removal ratio, less than 50%, whereas woody charcoals which was carbonized at more than $600^{\circ}C$ reached almost 100% removal ratio to bad smell gas such as trimethylamine, methymercaptan, hydrogen sulfide, and to VOC such as benzene, toluene, xylene in $5{\ell}$ tedler bag with each gas of 100 ppm. It was thought that because charcoals carbonized at high temperature, for example, $600^{\circ}C$ or $900^{\circ}C$ have enough specific surface area to adsorb gas of 100 ppm. Moreover these charcoals rapidly removed almost gas in 10 minutes. However, acetylene, $SO_2$ and $NO_2$, charcoals which was carbonized more than $600^{\circ}C$ and which showed high removal ratio had low gas removal ratio of 40% at even 4 hours adsorption. It was concluded that adsorptive ability of woody charcoal was mainly influenced with carbonizing temperature, so that different charcoals carbonized at different temperature brings different gas removal ratio because these charcoals have not only different physical factor such as specific surface area but different chemical characteristic such as functional group, expected.

• Clean Technology
• /
• v.23 no.4
• /
• pp.364-377
• /
• 2017

In this study, to improve the low surface area of domestic anthracite as raw materials of activated carbon, characteristics on chemical activation and VOCs adsorption of activated carbon according to mixing ratio of anthracite and lignite. For these, properties of raw materials, parameter characteristics of preparation processes for activated carbon, and VOCs adsorption characteristic of the prepared activated carbon are analyzed. The experimental results showed that, the domestic anthracite had disadvantages of high contents for ash and lead, arsenic, which were exceeded for the heavy metal limits, in the properties of raw materials. To improve these diadvantages, using the mixing ratio of anthracite and lignite, and the optimum conditions for pretreatment, activation, washing, and pellitization process, the activated carbon had a range of BET (Brunauer-Emmett-Teller) surface area of $1,154{\sim}1,420m^2g^{-1}$ with mesopore development and hydrophobic surface property. The carbons were satisfied with the quality standard for granular activated carbon, and had similar physicochemical properties with the commercial activated carbon. The minimum mixing condition for commercial VOCs activated carbon performance must have the caloric value of above $5,640kcal\;kg^{-1}$, and the carbon had higher adsorption capacity with order of xylene > toluene > benzene according to more higher molcular weight and hydrophobic property.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.537-544
• /
• 2007

This study was carried out to investigate adsorption characteristics of residual pesticides on an adsorbent. $Bauxsol^{TM}$ and mackban-stone as adsorbent were used. Analytical method for residual pesticides was established by GC/NPD and $GC/{\mu}ECD$. Pesticides used in this study were ${\alpha}$-endosulfan, ${\beta}$-endosulfan, pendimethalin and chlorpyrifos-methyl, fenitrothion, and recovery rates were more than 97%. Adsorption rate on an adsorbent was decreased in order of endosulfan, chlorpyrifos-methyl, pendimethalin, fenitrothion. Organochlorine pesticides showed higher removal rate than the other pesticides. $Bauxsol^{TM}$ gave both chemical decomposition and physical adsorption. Mackban-stone gave only physical adsorption on the other hand. The high pH and chloric ions structure of eluted solution have greatly affected at chemical resolution. The removal rate of pesticides was increased due to the physical property of adsorbent, i.e. high porosity. The above adsorbent is to be a candidate to remove residual pesticides in water and pond of links.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.264-266
• /
• 2002

원자력 발전소의 2차계통수에는 pH를 조절하여 부식을 억제하기 위해 pH제어제로 약염기성 화학물질을 첨가하고 있다. pH 제어제로 암모니아를 사용하였으나 pH가 낮아 부식생성물이 생성되어 증기발생기의 전열관에 슬러지의 퇴적으로 전열관의 부식이 촉진되므로 pH 제어제를 에탄올아민으로 바꿈으로 슬러지의 생성 및 이동을 억제하고 있다. 그러나 에탄올아민은 암모니아와 물리화학적 성질이 다르므로, 증기발생기에 유입되는 부식생성물의 용해와 흡착, 이온성 불순물의 잠복현상에 미치는 영향이 다르다. 본 연구는 암모니아와 에탄올아민이 온도가 점차 높아짐에 따라 부식생성물에 대찬 용해와 흡착, 이온성불순물의 잠복현상에 미치는 영향을 조사하였다. 이 실험의 결과로 2차 계통수의 pH 제어제는 ETA가 암모니아보다 증기발생기 슬러지의 철산화물에 더 흡착되어 더 많이 용해되어 퇴적된 슬러지 양을 감소시키므로, 슬러지에 흡착된 불순물의 양을 감소시저 잠복 현상을 억제할 것으로 조사되었다.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.384-388
• /
• 2006

The adsorption ability of polar and toxic substance was greatly enhanced by treating activated carbon with acid solution and impregnating iron, copper, or silver by using in 0.1 M $FeSO_4{\cdot}7H_2O,\;CuSO_4{\cdot}5H_2O,\;AgNO_3$ 300 mL per activated carbon 50 g. Physical and chemical properties of the metal impregnated activated carbons were measured using specific surface area, pore volume and size distribution, scanning eletron microscope(SEM), adsorption isotherm. When activated carbon was treated with acid, the quantity of impregnated metal increased about 1.3 times since the micropores were converted to mesopores or macropores. Both the physical absorption by micropores and chemical absorption by metal ions could be achieved simultaneously with the metal impregnated activated carbon because the capacity of micro pores did not change even after metal ions were impregnated.

• Clean Technology
• /
• v.29 no.4
• /
• pp.272-278
• /
• 2023

There is a lot of interest in methods for pollutants using adsorption, and recent research is being conducted to show that biochar can be used to remove organic and inorganic pollutants. In particular, wood waste as waste biomass requires a biomass recycling method, and a method to increase the adsorption capacity of biochar produced using wood waste is needed. Biochar is created by Hydrothermal carbonization (HTC) using, which uses low temperature and high pressure, has low energy consumption and does not require moisture removal pretreatment, and biochar is created through chemical activation using KOH, NaOH, and ZnCl₂ chemicals. The adsorption characteristics of biochar were determined by analyzing iodine adsorptivity, specific surface area, pore diameter, pore volume, pore distribution, and SEM according to the activation. The results of analyzing the selecting biochar by activating the biochar produced at HTC 300℃, 4 hr by KOH, NaOH, and ZnCl₂ chemicals, the specific surface area was 774~1.387 m²/g, showing a high specific surface area similar to activated carbon, and it was confirmed that micropores with an average pore diameter in the range of 21~24 Å were formed. As a result of SEM observation, the surface was uniform with a certain shape depending on activation. It was confirmed that one pore was developed and the number of pores increased.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.3
• /
• pp.285-291
• /
• 2015

Purpose: The hydrogel lenses have been functionalized with HA(Hyaluronic Acid) using two different methods: construction of an IPN(Interpenetrating Polymer Networks) and formation of CCB(Chemical Covalent Bonding). The lysozyme adsorption and physical properties such as optical transmittance and water content of the hydrogel lenses have been investigated in order to determine whether method is suitable for the application potentials in contact lens industry. Methods: HA have been added to the hydrogel lenses prepared in the Lab using the two different method, e.g. IPN and CCB. The optical transmittance was measured in the wavelength range of 300~800 nm. The water content was measured by the gravimetric method using 0.9% NaCl saline solution. The amounts of adsorbed lysozyme on the contact lenses was analyzed by HPLC after incubation for 12h in artificial tears. Results: The water content of the HA added hydrogel contact lenses was increased, and the lens made by IPN method showed higher water content than the lens made by CCB method. The optical transmittance was over 90% both before and after addition of HA. Comparing the lysozyme adsorption reduction ratio, contact lens manufactured by IPN method was 60.0%, and the lens made by CCB method was 40.4%. Conclusions: CCB method is appropriate to distribute the functional material evenly throughout the lens, whereas IPN method is effective for the case of giving the functionality on the lens surface without phase separation.