• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.207-213
• /
• 1998

On the basis of the previous study[1], miscibility were investigated and intermolecular interaction strength for the miscibility were relatively compared for the blends poly{2,2-(m-phenylene)-5,5'-bibenzimidazole}(PBI) with two aromatic polyimides (PIs) synthesized by another dianhydride. Aromatic PAAs were prepared by the reaction of condensation of two diamines, 4,4'-methylene dianiline(4,4'-MDA) and 4,4'-oxydianiline(4,4'-ODA) with 3,3',4,4'-diphenylsulfone tetracarboxylic dianhydride(DSDA) using DMAc, and then converted into PIs after curing. PBI/PAA blends were prepared by solution blending. Cast films or precipitated powders of the PBI/PAA blends were cared at a high temperature to transform into PBI/PIs blends. Miscibility and specific intermolecular interaction for miscibility in the blends were investigated, and compared with previous polyimide structures of PBI/PIs blends [1]. Two blends, PBI/DSDA+4,4'-MDA(Blend-V) and PBI/DSDA+4,4'-ODA(Blend-VI), were found miscible : the evidences were optically clear films, synergistic single composition dependent $T_g{\prime}s$, and frequency shifts of N-H stretching band as much as $39{\sim}40cm^{-1}$, and of C=O stretching band near 1730 and $1780cm^{-1}$, 5~6 and $3{\sim}4cm^{-1}$, respectively. The specific intermolecular interactions existing between PBI and PIs were relatively analyzed with the area(A) formed between the $T_g{\prime}s$ of the measured and that of the calculated by the Fox equation at all compositions, the ${\kappa}$ values in Gordon-Taylor equation obtained from the measured $T_g{\prime}s$, and differences of the frequency shifts in the functional N-H and carbonyl stretching band. From the results, the area(A) and the ${\kappa}$ values for Blend-V and VI were smaller than those for Blend-III and IV used in previous study[1]. Differences of the frequency shifts in the functional groups(N-H and C=O) also showed similar tendency. Thus, specific intermolecular interaction strength in terms of hydrogen bonding of PBI/PI blends is dependent upon chemical structures of PIs, that is, PIs it seems that $SO_2$ group in dianhydride(DSDA) has weaker hydrogen bond strength than those of C=O in BTDA. In other words, it implies that the former occupied bulk space than the latter due to the sterric effect.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.503-510
• /
• 2005

In this research, composite alumina was prepared to add the various promoters by sol-gel method and examined its thermal stability. After sintering at $1,200^{\circ}C$, the thermal stability resulted in following order, $Si{\fallingdotseq}La$ > Ti > $Ba{\fallingdotseq}Ce$ > Y > $Zr{\fallingdotseq}Mg$, in accordance with adding the promoters. Especially in case of silica-added alumina, a phase transformation temperature to ${\alpha}$-alumina increased about $150^{\circ}C$ and after sintering at $1,200^{\circ}C$, it showed to maintain in ${\gamma}$-form and ${\delta}$-form alumina phase. Also it showed an increase of surface area from $3m^2/g$ to $71m^2/g$ compared with pure ${\alpha}$-alumina. In the case of silicaadded alumina, the characterization change of this alumina particle resulted in a delay of phase transformation because Si-O-Al bond was increased when sintered at high temperature. In case of lanthanum-added alumina, there was a sintering delay phenomenon in inter-particles as $LaAlO_3$ structure existed. The existence of lanthanum structure was confirmed by XRD and XPS analysis. It appeared on the alumina surface as $La_2O_3$ structure when it was sintered under $1,000^{\circ}C$, as the perovskite structure of $LaAlO_3$ at above $1,000^{\circ}C$ and as the magneto-plumbite structure of $LaAl_{11}O_{18}$ at above $1,300^{\circ}C$.

• Journal of Life Science
• /
• v.17 no.4 s.84
• /
• pp.462-469
• /
• 2007

In this study, we isolated, characterized, and compared the vasa homologous genes of diploid and triploid Paragonimus westermani and localized VASA homologous proteins in both lung fluke types. Open reading frames of Pw-vasa-2n and Pw-vasa-3n were of 1812 bp, and encoded deduced proteins of 622 amino acids with calculated molecular weights of 69.0 kDa and 68.9 kDa and pI's of 9.11 and 9.03, respectively. A comparison of these two VASA deduced protein sequences showed that only 6 of the 622 amino acids differed. The deduced sequences of Pw-VASA-2n and Pw-VASA-3n contained eight consensus sequences characteristic of the DEAD-box protein family and their N-terminal regions contained four arginine-glycine-glycine (RGG) motifs. These two lung fluke VASA-like proteins were more similar to those of other VASA proteins than to those of other DEAD-family proteins isolated from several organisms (planarian, zebra fish, mouse, and human). vasa homologous gene transcription and VASA protein expressions in triploid type lung flukes was slightly stronger than in the diploid type. Immunostaining showed that testes and a portion of the ovaries of both diploid and triploid lung flukes reacted strongly to anti-Pw-VASA antibody.

• Applied Biological Chemistry
• /
• v.23 no.2
• /
• pp.131-139
• /
• 1980

TOK (2,4-Dichlolo-4'-nitrodiphenyl ether) was applied to two Korean soils possessing different physico-chemical properties at a certain concentration and incubated for a certain time under flooded conditions. The metabolites and the soil microorganisms involved in the degradation of TOK are studied. Chong Ju and Chung Ju soils treated with TOK at a concentration of 500 ppm and incubated for two, four, and six months at $30^{\circ}C$ yielded 4-chloro-4'-amino diphenyl ether, 2, 4-dichloro-4'-amino diphenyl ether(amino-TOK), N-[4'-(4-chloro-phenoxy)] phenyl acetamide, and N-[4'-(4-chloro-phenoxy)] phenyl formamide as the major metabolites. TOK underwent the reduction of nitrogroup to amino group, dechlorination, acetylation, and formylation. No cleavage at the ether linkage was recognized. TOK was more readily degraded in Chung Ju soil which is characterized by the higher pH (PH 6.43), clay loam in textural class, and the higher cation exchange capacity. The toxicity of TOK as a possible environmental contaminant is expected to be considerably reduced as a result of the above degradation Twelve strains of soil bacteria were isolated from the TOK-treated Chong Ju and Chung Ju soils. As a result of the incubation of TOK in pure cultures of the isolates, T-1-1 strain isolated from Chong Ju soil had almost no degradability, whereas T-2-3 strain turned out to be the most potent. The degradation of TOK by the isolates constituted mostly the reduction of the nitro group to amino group. The citrate buffer extract of Chung Ju soil reduced TOK more readily to amino-TOK than that of Chong Ju soil.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.101-111
• /
• 2017

Mineral carbonation is a technology in which carbonates are synthesized from minerals including serpentine and olivine, and industrial wastes such as slag and cement, of which all contain calcium or magnesium when reacted with carbon dioxide. This study aims to develop the mineral carbonation technology for commercialization, which can reduce environmental burden and process cost through the reduction of carbon dioxide using steel slag and the slag reuse after calcium extraction. Calcium extraction was conducted using NH4Cl solution for air-cooled slag and convert slag, and ${\geq}98%$ purity calcium carbonate was synthesized by reaction with calcium-extracted solution and carbon dioxide. And we conducted experimentally to minimize the quantity of by-product, the slag residue after calcium extraction, which has occupied large amount of weight ratio (about 80-90%) at the point of mineral carbonation process using slag. The slag residue was used to replace silica sand in the manufacture of cement panel, and physical properties including compressive strength and flexible strength of panel using the slag residue and normal cement panel, respectively, were analyzed. The calcium concentration in extraction solution was analyzed by inductively coupled plasma optical emission spectrometer (ICP-OES). Field-emission scanning electron microscope (FE-SEM) was also used to identify the surface morphology of calcium carbonate, and XRD was used to analyze the crystallinity and the quantitative analysis of calcium carbonate. In addition, the cement panel evaluation was carried out according to KS L ISO 679, and the compressive strength and flexural strength of the panels were measured.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.2
• /
• pp.210-220
• /
• 1996

Background : Neutrophils or monocytes separated in vitro by the adherence to plastic surface are known to be activated by surface adherence itself and subsequent experimental data might be altered by surface adherence. In the process of surface adherence, adhesion molecules have a clear role in intracellular signal pathway of cellular activation. Human alveolar macrophages(HAM) are frequently purified by the adherence procedure after bronchoalveolar lavage. But the experimental data of many reports about alveolar macrophages have ignored the possibility of adhesion-induced cellular activation. Method : Bronchoalveolar lavage was performed in the person whose lung of either side was confirmed to be normal by chest CT. With the measurement of hydrogen peroxide release from adherent HAM to plastic surface and non-adherent HAM with or without additional stimulation of phorbol myristate acetate(PMA) or N-formyl-methionyl-leucyl-phenylalanine (fMLP), we observed the effect of the adherence to plastic surface. We also evaluated the effect of various biological surfaces on adhesion-induced activation of HAM. Then, to define the intracellular pathway of signal transduction, pretreatment with cycloheximide, pertussis toxin and anti-CD11/CD18 monoclonal antibody was done and we measured hydrogen peroxide in the culture supernatant of HAM. Results : 1) The adherence itself to plastic surface directly stimulated hydrogen peroxide release from human alveolar macrophages and chemical stimuli such as phorbol myristate acetate(PMA) or N-formyl-methionyl-leucyl-phenylalanine(fMLP) colud not increase hydrogen peroxide release in these adherent macrophages which is already activated. 2) PMA activated human alveolar macrophages irrespective of the state of adhesion. However, fMLP stimulated the release of hydrogen peroxide from the adherent macrophages, but not from the non-adherent macrophages. 3) HAM adherent to A549 cell(type II alveolar epithelium-like human cell line) monolayer released more hydrogen peroxide in response to both PMA and fMLP. This adherence-dependent effect of fMLP was blocked by pretreatment of macrophages with cycloheximide, pertussis toxin and anti-CD18 monoclonal antibody, Conclusion : These results suggest that the stimulatory effect of PMA and fMLP can not be found in adherent macrophage because of the activation of human alveolar macrophage by the adherence to plastic surface and the cells adhered to biologic surface such as alveolar epithelial cells are appropriately responsive to these stimuli. It is also likely that the effect of fMLP on the adherent macrophage requires new protein synthesis via G protein pathway and is dependent on the adhesion between alveolar macrophages and alveolar epithelial cells by virtue of CD11/CD18 adhesion molecules.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.588-596
• /
• 2006

The surface of polystyrene membrane treated by Ar, $O_2$ plasma, and the effects were observed before and after the treatment and permeability of $CO_2$, $N_2$ and selectivity of $CO_2$ relative to $N_2$ was measured using continuous flow gas permeation analyzer (GPA). The mole ratio of O over C in the surface was increased from 0 to 0.179 with Ar plasma treatment and route mean square of surface was increased from $15.86{\AA}$ to $71.64{\AA}$. Therefore the contact angle was decreased from $89.16^{\circ}$ to $18.1^{\circ}$. Thus Plasma treatments made surface of membrane tend to be highly hydrophilic. The optimum condition for the $CO_2$ permeability and ideal selectivity of the plasma treated membrane was as follows: the measurement of Ar (60 W, 2 min, $70^{\circ}C$) plasma treatment was $1.14{\times}10^{-12}[m^3(STP){\cdot}m/m^2{\cdot}sec{\cdot}atm]$ and 4.22. In the case of $O_2$ plasma treatment, the contact angle was decreased at $13.56^{\circ}$ with increase of O/C ratio ($0.189{\AA}$) and route mean square of surface ($57.10{\AA}$). The optimum condition for the $CO_2$ permeability and ideal selectivity of the plasma treated membrane was as follows: the measurement of $O_2$ (90 W, 2 min, $70^{\circ}C$) plasma treatment was $7.1{\times}10^{-12}[m^3(STP){\cdot}m/m^2{\cdot}sec{\cdot}atm]$ and 11.5. After plasma treatment, the changes of membrane surface were all subtly linked with both cross-linking and etching effects. Finally, it was confirmed that the gas permeation capacity and selectivity of the modified membrane with plasma could be improved by an appropriate control of the plasma conditions such as treatment time, the power input and sort of plasma gas.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.680-687
• /
• 1999

To understand the role of shelf sediment in phosphorus biogeochemical cycle, we carried out sequential sediment extraction (SEDEX) of P and porewater analysis on 14 core samples collected in the South Sea of Korea, SEDEX classified P-pools into 5 phases and results are grouped into two categories: reactive P (loosely sorbed-P and Fe bound-P) and refractory P (detrital inorganic-p, authigenic mineral-P and organic-P). Total P concentrations are decreased with sediment depth in all samples as a result of dissolution to porewater. Reactive P comprises about $20\~50\%$ of total P, and iron bound-P is the major form consisting $70\~80\%$ of reactive P-pool. Iron bound-P decreases sharply with depth. Depth profiles of dissolved P concentration in porewater show mirror image of iron bound-P, revealing the role of FeOOH as a regulator of reactive P supply to overlying water column. Authigenic mineral-P consists less than $5\%$ of total P, thus removal of reactive P by converting into refractory P seems inefficient in shelf sediment. This implies that continental shelf sediment sequesters P temporarily rather than permanently. Results show local variation. Nakdong estuary receiving large amount of terrigenous input shows the highest concentration of total P and reactive P. Here iron oxyhydroxides at the surface sediment control the water column flux of P from sediment. Although total P content at the surface is comparable (500$\~$600 ${\mu}g{\cdot}g^{-1}$) between the South Sea and East China Sea, the former contains more iron bound-P and less derital inorganic-P than the latter. Reasons for the difference seem due in part to particle texture, and to biological productivity which depends roughly on the distance from land.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.4
• /
• pp.871-888
• /
• 1997

Background : It is now thought that the earliest manifestation of idiopathic pulmonary fibrosis is alveolitis, that is, an accumulation of inflammatory and immune effector cells within alveolar walls and spaces. Inflammatory cells including alveolar macrophages and resident normal pulmonary tissue cells participate through the release of many variable mediators such as inflammatory growth factors and cytokines, which contribute to tissue damage and finally cause chronic pulmonary inflammation and fibrosis. This study was performed to investigate the source and distribution pattern of transforming growth factor-${\beta}_1$(TGF-${\beta}_1$), platelet derived growth factor(PDGF), basic fibroblast growth factor(bFGF), interleukin 1(IL-1), interleukin 6(IL-6), tumor necrosis factor-$\alpha$ (TNF-$\alpha$) and the role of these mediators on bleomycin(BLM)-induced pulmonary injury and fibrosis in rats. Method : Wistar rats were divided into three groups(control group, BLM treated group, BLM and vitamine E treated group). Animals were sacrificed periodically at 1, 2, 3, 4, 5, 7, 14, 21, 28 days after saline or BLM administration. The effects were compared to the results of bronchoalveolar lavage fluid analysis, light microscopic findings, immunohistochemical stains for six different mediators(TGF-${\beta}_1$, PDGF, bFGF, IL-1, IL-6 and TNF-$\alpha$) and mRNA in situ hybridization for TGF-${\beta}_1$. Results : IL-1 and IL-6 are maximally expressed at postbleomycin 1~7th day which are mainly produced by neutrophils and bronchiolar epithelium. It is thought that they induce recruitment of inflammatory cells at the injury site. The expression of IL-1 and IL-6 at the bronchiolar epithelium within 7th day is an indirect evidence of contribution of bronchiolar epithelial cells to promote and maintain the inflammatory and immune responses adjacent to the airways. TNF-$\alpha$ is mainly produced by neutrophils and bronchiolar epithelial cells during 1~5th day, alveolar macrophages during 7~28th day. At the earlier period, TNF-$\alpha$ causes recruitment of inflammatory cells at the injury site and later stimulates pulmonary fibrosis. The main secreting cells of TGF-${\beta}_1$ are alveolar macrophages and bronchiolar epithelium and the target is pulmonary fibroblasts and extracellular matrix. TGF-${\beta}_1$ and PDGF stimulate proliferation of pulmonary fibroblasts and TGF-${\beta}_1$ and bFGF incite the fibroblasts to produce extracellular matrix. The vitamine E and BLM treated group shows few positive cells(p<0.05). Conclusion : After endothelial and epithelial injury, the neutrophils and bronchiolar epithelium secrete IL-1, IL-6, TNF-$\alpha$ which induce infiltration of many neutrophils. It is thought that variable enzymes and $O_2$ radicals released by these neutrophils cause destruction of normal lung architecture and progression of pulmonary fibrosis. At the 7~28th day, TGF-${\beta}_1$, PDGF, bFGF, TNF-$\alpha$ secreted by alveolar macrophages sting pulmonary fibroblasts into proliferating with increased production of extracellular matrix and finally, they make progression of pulmonary fibrosis. TNF-$\alpha$ compares quite important with TGF-${\beta}_1$ to cause pulmonary fibrosis. Vitamine E seems to decrease the extent of BLM induced pulmonary fibrosis.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.67-73
• /
• 2018

$[^{11}C]PIB$ synthesis has been performed by a loop-methylation and HPLC purification in our lab. However, this method is time-consuming and requires complicated systems. Thus, we developed an on-cartridge method which simplified the synthetic procedure and reduced time greatly by removing HPLC purification step. We compared 6 different cartridges and evaluated the $[^{11}C]PIB$ production yields and specific activities. $[^{11}C]MeOTf$ was synthesized by using TRACERlab FXC Pro and was transferred into the cartridge by blowing with helium gas for 3 min. To remove byproducts and impurities, cartridges were washed out by 20 mL of 30% EtOH in 0.5 M $NaH_2PO_4$ solution (pH 5.1) and 10 mL of distilled water. And then, $[^{11}C]PIB$ was eluted by 5 mL of 30% EtOH in 0.5 M $NaH_2PO_4$ into the collecting vial containing 10 mL saline. Among the 6 cartridges, only tC18 environmental cartridge could remove impurities and byproducts from $[^{11}C]PIB$ completely and showed higher specific activity than traditional HPLC purification method. This method took only 8 ~ 9 min from methylation to formulation. For the tC18 environmental cartridge and conventional HPLC loop methods, the radiochemical yields were $12.3{\pm}2.2%$ and $13.9{\pm}4.4%$, respectively, and the molar activities were $420.6{\pm}20.4GBq/{\mu}mol$ (n=3) and $78.7{\pm}39.7GBq/{\mu}mol$ (n=41), respectively. We successfully developed a facile on-cartridge methylation method for $[^{11}C]PIB$ synthesis which enabled the procedure more simple and rapid, and showed higher molar radio-activity than HPLC purification method.