• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.129-138
• /
• 2008

The characteristics of beneficiating kaolin mineral by liberation (selective grinding) and air classification have been investigated, comparing the grinding rates of ball mill and impact mill. The ore was ground using a ball mill and a impact mill to evaluate the grindability of the two grinding methods based on the constant production amount of fine particles in size less than 325 mesh. Then, the fine product was further separated into two fractions using an air-classifier and each fraction was chemically analyzed to compare the beneficiation efficiency of the two grinding methods. The chemical grade of kaolin mineral decreased as increasing the grinding rate of both the mills. particularly in the case of ball mill because of overgrinding impurities such as quartz and feldspar. In the case of the ball milling, the fine fraction less than 325 mesh was air-classified at a cutting point of $43\;{\mu}m$. The production rate of the air-classified concentrate was found to be 66.2 wt%, removing 5.3% of $Fe_2O_3$ and 34.6% of CaO. Under the same conditions mentioned above with the impact mill, the production rate of the air-classified concentrate was 64.4 wt%, removing 34.2% of $Fe_2O_3$, 67.6% of CaO and 25.0% of $TiO_2$. Therefore, our results indicate that impact mill is superior to ball mill in terms of impurity removal.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.4
• /
• pp.516-525
• /
• 2010

Flaxseed has recently gained attention as a functional food. In this paper, physicochemical analyses of flaxseed and its oil were performed. Crude fat content ranged from 37~43%, moisture 0.2~6.8%, carbohydrate 30~35%, crude protein 18~23%, and crude ash 3~4%. Flaxseed is also an important source of dietary fiber. The TDF(total dietary fiber) contents of the flaxseed samples were 28~31%, and the SDF(souble dietary fiber) content of roasted flaxseeds was higher than that of raw flaxseeds. The major minerals found in flaxseed were calcium, potassium, magnesium, and phosphate. The flaxseeds were rich in ${\gamma}$-tocopherol with 234.3 mg/kg in raw brown flaxseed and 134.1 mg/kg in raw gold flaxseed, respectively. Roasted flaxseeds showed slightly lower vitamin and amino acid contents than those of the raw samples. The iodine, saponification, and acid values of brown flaxseed oil were 204.1 g/100 g, 193.6 mg/g, and 1.59 mg/g, and for gold flaxseed oil were 203.0 g/100 g, 189.9 mg/g, and 2.35 mg/g, respectively. ${\alpha}$-Linolenic acid(ALA, C18:3n-3) was highly concentrated in the flaxseed oil, which constituted about 55.5~56.1% of total fatty acids. Thus, flaxseed oil is a good source of omega-3 fatty acids and beneficial for the heart. Flaxseed contains high levels of dietary fiber including lignans, as well as minerals and vitamins, which may have antioxidant actions and help protect against certain cancers.

• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.478-487
• /
• 2013

Onions were treated with different amounts of sulfur (S) during cultivation and examined for their physicochemical properties and flavor. Onions cultivated without S application were the control group; the treatment groups were grown in soil that had been pretreated with S and received additional S applications or four times before harvest. As the number of S applications increased, the levels of crude protein, quantified with total nitrogen; ash, approximating total amounts of minerals; and dietary fiber of the onions tended to increase. The mineral compositions also improved, with noticeable increases in the levels of Mg, K, Fe, and Zn. In particular, the reducing capacity of the onions increased appreciably (p<0.05), without increases in the levels of S-containing compounds such as thiosulfinate or S-containing amino acids. Nevertheless, the spicy hot taste and flavor, which is generated mainly from S-containing compounds, were perceived more strongly in the onions that had received more S applications.

• Clean Technology
• /
• v.25 no.3
• /
• pp.179-188
• /
• 2019

Upon the combustion of coal particles in a coal-fired power plant, fly ash (80%) and bottom ash (20%) are unavoidably produced. Most of the ashes are, however, just dumped onto a landfill site. When the landfill site that takes the fly ash and bottom ash is saturated, further operation of the coal-fired power plant might be discontinued unless a new alternative landfill site is prepared. In this study, wet flotation separation system (floating process) was employed in order to recover unburned carbon (UC), ceramic microsphere (CM) and cleaned ash (CA), all of which serving as useful components within fly ash. The average recovered fractions of UC, CM, and CA from fly ash were 92.10, 75.75, and 69.71, respectively, while the recovered fractions of UC were higher than those of CM and CA by 16% and 22%, respectively. The combustible component (CC) within the recovered UC possessed a weight percentage as high as 52.54wt%, whereas the burning heat of UC was estimated to be $4,232kcal\;kg^{-1}$. As more carbon-containing UC is recovered from fly ash, UC is expected to be used successfully as an industrial fuel. Owing to the effects of pH, more efficient chemical separations of CM and CA, rather than UC, were obtained. The average $SiO_2$ contents within the separated CM and CA had a value of 53.55wt% and 78.66wt%, respectively, which is indicative of their plausible future application as industrial materials in many fields.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1591-1593
• /
• 2004

압력센서는 몇 가지 센싱 메카니즘을 가지고 있으므로 종류가 다양하고 크기 변에서도 여러 가지가 이용되고 있다. 최근에는 센싱 부분이 작으며 제어부분도 포함되는 ASIC화된 센서 시스템이 개발되고 있다. 여기에 이용되는 대부분의 탄성물질은 힘을 받았을 때 물질 내부의 벌크에서 저항 값이 변화하는 특성을 갖고 있다. 이러한 특성은 피에조 저항률(piezoresistivity)로 언급되며 스트레인 게이지의 감도에 영향을 주는 중요한 요소로 작용한다. 다이어프램으로 금속대선 세라믹을 사용하면 안정성이 우수한 특정을 가칠 수 있으며, 부식성 가스 류 및 화학성분에 대해서 내성이 강하고 환경변화에 따른 변형과 공정의 단순화 등 우수한 특성을 갖고 있는 것이 큰 장점이다. 센싱부는 산화 루세니움($RuO_2$)을 주 성분으로 하는 분말을 Paste화 하여 다이어프램 위에 스크린 프린팅을 하여 기본성능을 나타내었으며 특히, 상품화에서 중요한 일반성능에서는 온도 특성에 대한 Span 과 Offset 그리고 공정의 단순화에 대해서 고찰을 하였다.

• Journal of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.53-62
• /
• 1980

The present work is concerned with the studies on the production of PZT ceramics by newly developed mixing process, which tentatively named "precipitation mixing method", consists of precipitating lead carbontate in the presence of $TiO_2$ and/or $ZrO_2$. Mixtures of $PbCO_3$ and $TiO_2$ or $ZrO_2$ were compared with those obtained by ball-milling with special emphasis on the rate and mechanism of formation of lead titanate and lead zirconate. A possiblity for obtaining PZT ceramics by "precipitation mixing method" was established.

• Journal of the Korean Chemical Society
• /
• v.45 no.1
• /
• pp.45-50
• /
• 2001

A combined spectrometer which could function as either the absorption spectrometer or the reflectance spectrometer was built and used for the comparison of the applicabilities of the two types of spectrometers. According to the results the sensitivity of the reflectance spectrometry was found to be useful for the quantitative analysis when the concentration of the analyte was too low or the molar absorptivity of the analyte was too small for one to perform the quantitative analysis using the absorption spectrometry.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.92-96
• /
• 2003

1) 우리나라의 하수슬러지 해양투기량은 발생량의 73%를 상회하고 있으며 최근에 급증하는 추세에 있다. 2) 슬러지를 비롯하여 해양에 투기된 유해성분은 해양생물권 오염도 증가의 큰 요인으로 작용하고 있었다. 3) 해양에 투기된 하수슬러지가 침강하여 퇴적층을 형성하였을 때 저서생태계에 영향을 미칠 수 있는 가능성은 아주 높았다. 4) 슬러지의 중금속 화학형태 분석 결과 생물이 이용 가능한 중금속 비율이 원소에 따라 차이는 있으나 총 함량의 80% 이상을 차지하는 경우도 있었다. 5) 해양생물권의 오염도 증가, 유해성분에 의한 생태계의 악영향 및 투기된 중금속의 높은 생물 이용 가능성 등을 고려할 때 하수슬러지 처리방법의 전환이 필요하였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.330-332
• /
• 2003

현대 사회는 인구, 산업, 경제, 활동이 도시에 집중되어 발달되고 있으며, 도시에서의 활동증가로 인한 교통량도 급격히 증가하고 있다. 급격히 증가된 인간의 생활환경 변화로 인한 오염물질의 배출도 역시 증가하여 우리의 주변환경을 심각하게 오염시키고 있다. 대기중에 존재하는 에어로졸 입자는 자연발생원에서 직접 대기중에 배출되는 해염입자, 토양입자 등과 같은 1차 입자(Primary particle)와 주로 연소, 소각 등에 의해 인위적으로 발생된 가스상 물질의 대기중에서 다양한 물리ㆍ화학적인 반응을 통해 생성되는 2차입자(Secondary particle)로 크게 구별할 수 있다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.185-186
• /
• 2001

미세입자의 배출원을 추정하기 위해서는 수용지점에 영향을 미칠 수 있는 배출원의 화학적 특성에 관한 정보를 필요로 한다. 수용모델(chemical mass balance model, CMB)의 경우, 모델수행에 필요한 정보는 각각의 배출원에서 배출되는 입자의 화학적 구성성분특성을 파악하는 것이 가장 중요하다(Waton et al., 1984; U. S. EPA, 1987; 강병욱 등, 2000) 이러한 배출원으로는 각종 산업배출원, 자동차, 토양, 도로 비산먼지 등 지역의 특성에 따라서 다양한 배출원들이 대상이 될 수 있다. (중략)