• Food Science and Preservation
• /
• v.20 no.4
• /
• pp.459-466
• /
• 2013

This study was carried out in order to investigate sterilization effect and to extend storage periods of the Rubus coreanus by treating with tap water (TW), electrolyzed water (EW) and aqueous chlorine dioxide ($ClO_2$). After each treatment plot was soaked with 10, 50, 100, 200 ppm in each sterilizing solution within 30 sec, each treatment was compared during the storage time at room temperature and refrigerator temperature. As results of total plate count according to temperatures and periods, the microbial sterilizing power of each treatment plot was bigger at EW and $ClO_2$ treatment plots than the TW treatment plot; however, it sharply increased on the high concentration $ClO_2$ treatment plot. Futhermore, the cold storage treatment plot had more outstanding microbial sterilizing power than the room temperature treatment plot. As a result of observing the surface of the Rubus coreanus using scanning electron microscope (SEM), no microbe was seen in EW and $ClO_2$ treatment plot. The results of measuring enzyme activity showed a more significant decrease in EW and $ClO_2$ solutions treatment plot than TW treatment plot but gradually increased with time. The contents of total polyphenol revealed similar values on each treatment. The EW and $ClO_2$ treatment of the Rubus coreanus could be considered as good methods for inhibiting microbial growth in fresh vegetables and fruit, thereby contributing to quality maintenance.

• Journal of Energy Engineering
• /
• v.2 no.1
• /
• pp.54-67
• /
• 1993

Two turbulent reaction models of the premixed CC1$_4$/CH$_4$/air mixture are successfully incorporated in a 3-dimensional computer program and is applied for Dow Chemical incinerator equipped with two main off-center burners. The first reaction model is fast chemistry model(model 1), in which chemical reaction is governed by the turbulent mixing itself. And the second one is nonequilibrium model(model 2), where the effect of the chemical kinetics due to the presence of CC1$_4$is considered by the incorporation of the burning velocity data of CC1$_4$. The second model not only shows the flame inhibition trend due to the presence CC1$_4$compound, but also predicts qualitatively the vortical stratification of the CC1$_4$concentration appeared experimentally at the kiln exit. Other comparisions of two models are made in detail.

• The Korean Journal of Pesticide Science
• /
• v.20 no.2
• /
• pp.138-144
• /
• 2016

Phenoloxidase (PO) is an oxidizing enzyme and plays crucial roles in insect immunity and cuticle sclerotization. High oxidizing activity of chlorine dioxide gives effective control activities against microbes and insect pests. These allowed us to assess any inhibitory activity of chlorine dioxide against PO with respect to insect immunity. PO activities of the Indeanmeal moth, Plodia interpunctella, was detected in both hemocytes and plasma. Upon bacterial challenge, PO activity was significantly increased especially in plasma. However, the immune challenge coupled with chlorine dioxide treatment did not enhance PO activity. When different chlorine dioxide concentrations were incubated with activated PO by immune challenge, they did not inhibit the activated PO. These results indicate that chlorine dioxide suppresses PO activity by inhibiting PO activation.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.158-159
• /
• 2013

방염제인 인산암모늄에 질산칼륨을 첨가하여 질산칼륨이 인산암모늄의 방염성능에 미치는 영향을 DSC와 실체현미경으로 분석하였다. 활성화에너지는 키싱거방법을 도입하여 분석하였다. 방염성능 실험으로서 셀룰로스를 연료로 사용하였다. 질산칼륨이 일정량 첨가된 방염제를 사용하는 경우 인산암모늄의 활성화에너지를 높이고 탄화면적을 감소시켜 연소확대를 억제하였다. 방염제인 질산칼륨이 첨가된 인산염을 방염제로 사용하는 경우 질산칼륨의 강한 산화력으로 화염발생 온도를 낮추고 탄화형성을 억제하여 화재진행 속도를 낮추는 것으로 나타났다. 적정량 이하의 질산칼륨이 포함된 방염제의 처리는 연소속도를 높이고 탄화물형성을 감소시킬 수 있음을 제시하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.72-83
• /
• 2010

Experiments were conducted to investigate the effects of added diluents (carbon dioxide, nitrogen, and helium) on cellular instabilities in outwardly propagating spherical syngas-air premixed flames. Laminar burning velocities and Markstein lengths were measured by analyzing high-speed schlieren images at various diluent concentrations and equivalence ratios. Experimental results showed substantial reduction of the laminar burning velocities and of the Markstein lengths with the diluent additions in the fuel blends. Effective Lewis numbers of helium-diluted syngas-air flames increased but those of carbon dioxide- and nitrogen-diluted syngas-air flames decreased in increase of diluents in the reactant mixtures. With helium diluent, the propensity for cells formation was significantly diminished, whereas the cellular instabilities for carbon dioxide- and nitrogen-diluted syngas-air flames were not suppressed.

• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.57-64
• /
• 2006

The crack presented in concrete structures causes a structural defect, the durability decrease, and external damages etc. Therefore, it is necessary to improve durability through the effort to control the crack. Fluosilicic acid($H_2SiF_6$) is recovered as aqueous solution which absorbs $SiF_4$ produced from the manufacturing of industrial-graded $H_3PO_4$ or HF. Generally, fluosilicates prepared by the reaction between $H_2SiF_6$ and metal salts. Addition of fluosilicates to cement endows odd properties through unique chemical reaction with the fresh and hardened cement. Mix proportions for experiment were modulated at 0.45 of water to cement ratio and $0.0{\sim}2.0%$ of adding ratio of fluosilicate salt based inorganic compound. To evaluate correlation of concrete strength and adding ratio of fluosilicate salt based inorganic compound, the tests were performed about design strength(21, 24, 27 MPa) with 0.5% of adding ratio of fluosilicate salt based inorganic compound. Applications of fluosilicate salt based inorganic compound to reduce cracks resulted from plastic and drying shrinkage, to improve durability are presented in this paper. Durability was evaluated as neutralization, chloride ion penetration depth, freezing thawing resistant tests and weight loss according reinforcement corrosion. It is ascertained that the concrete added fluosilicate salt based inorganic compound showed m ability to reduce the total area and maximum crack width significantly as compared non-added concrete. In addition, the durability of concrete improved because of resistance to crack and watertightness by packing role of fluosilicate salt based inorganic compound obtained and pozzolanic reaction of soluble $SiO_2$ than non-added concrete.

• Journal of Digital Convergence
• /
• v.15 no.6
• /
• pp.339-344
• /
• 2017

In this study, microorganisms were isolated from nosocomial environment and are identified by biochemical analysis as the part of biochemical and technical convergence. Microorganisms were collected at intense care unit of general hospital located in Pyeongtak (2014.11.28. - 2014. 11. 30). Using a VITEK2 equipment of biochemical approaches, eleven microorganisms e.g., Micrococcus luteus (or M. lylae), Granulicatella adiacens (M. luteus or M. lylae), Staphylococcus caprae, Sphingomonas paucimobilis, Kocuria kristinae, G elegans, Aerococcus viridans (or Staphylococcus arlettae), Methylobacterium spp., Dermacoccus nishinomiyaensis (or Kytococcus sedentarius), Kocuria kristinae (or M. luteus, M. lylae), Pseudomonas oryzihabitans were identified. And then identified bacteria plates were applied with a plastic stick, so called with "FarmeTok (medistick/Puristic) to produce ClO2. ClO2-releasing plastic stick showed the very strong inhibition of bacterial growth with about 99.9%. There were no bacterial colonies on the ClO2-incubated plate. Taken together, it is suggested that chlorine dioxide should be very strong inhibitor to microorganisms of nosocomial infections.

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.761-771
• /
• 2014

The study was conducted to evaluate effects of weed managements after false seedbed on the weed control and growth of spring and fall cabbages (Brassica oleracea L.) in an organic upland in 2013. Weed managements included rake, flame, PE mulch, and none treatment. The weed occurrence was not effectively controlled by rake treatment but controlled by flame treatment in spring and fall cultivation. PE mulch plots had 30% of tip-burn in spring cultivation. Weed managements after false seedbed were similar fresh weight, leaf number, and cabbage yield to the conventional PE mulch. Head of cabbage was the lowest on the none treatment. Fall cultivation reduced the weed density and increased yield of cabbage compared to those of spring in all treatment plots. In conclusion, rake or flame treatment after false seedbed markedly decreased weed occurrence, which was expected to use for management of environmentally-friendly vegetation as a substitute of PE mulch.

• Fire Science and Engineering
• /
• v.19 no.3 s.59
• /
• pp.13-19
• /
• 2005

An experimental study is presented for extinguishing characteristics of liquid fuel fire by water mist containing sodium acetate trihydrate. To evaluate the extinguishing performance of water mist containing an additive, the evaporation characteristics of a water droplet on a heated surface was examined. The evaporation process was recorded by a charge-coupled-device camera. Also, small-scale extinguishing tests were conducted for n-heptane pool fire in ventilated space to measure flame temperature variation. The average evaporation rate of a water droplet containing an additive was lower than that of a pure water droplet at a given surface temperature due to the precipitation of salt in the liquid-film and change of surface tension. In case of using an additive, the flame temperature was lower than that of pure water at a given discharge pressure and it was because the momentum of a water droplet containing an additive was increased reducing flame size. And also dissociated metal atoms, sodium, were reacted as a scavenger of the major radical species OH^-,\;H^+$ which were generated for combustion process. Moreover, at a high pressure of 4MPa, the fire was extinguished through blowing effect as well as primary extinguishing mechanisms.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.3
• /
• pp.39-46
• /
• 2015

A numerical study has been conducted on CO after burning and NO generation of the rocket plume as the cooling water injected to the rocket plume. The present study shows that the cooling water has a role of increasing the degree of CO after burning and reducing NO generation. However the effect varies as the injection configuration of the cooling water. When the cooling water is injected at the side of the plume, NO generation is dramatically reduced while the degree of CO after burning is relatively low. When the cooling water is injected at the side and the center of the plume, CO after burning is highly increased and NO generation is also dramatically reduced.