• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.37-47
• /
• 2009

For the inspection of wood, machine vision is the most common automated inspection method used at present. It is required to sort wood products by grade and to locate surface defects prior to cut-up. Many different sensing methods have been applied to inspection of wood including optical, ultrasonic, X-ray sensing in the wood industry. Nowadays the scanning system mainly employs CCD line-scan camera to meet the needs of accurate detection of lumber defects and real-time image processing. But this system needs exact feeding system and low deviation of lumber thickness. In this study low cost CCD area sensor was used for the development of image processing system for lumber being fed. When domestic red pine being fed on the conveyer belt, lumber images of irregular term of captured area were acquired because belt conveyor slipped between belt and roller. To overcome incorrect image merging by the unstable feeding speed of belt conveyor, it was applied template matching algorithm which was a measure of the similarity between the pattern of current image and the next one. Feeding the lumber over 13.8 m/min, general area sensor generates unreadable image pattern by the motion blur. The red channel of RGB filter showed a good performance for removing background of the green conveyor belt from merged image. Threshold value reduction method that was a image-based thresholding algorithm performed well for knot detection.

• Proceedings of the KSLP Conference
• /
• 1999.11a
• /
• pp.199-199
• /
• 1999

각종 음성질환에 있어서 음성검사는 진단뿐 아니라 치료를 위한 중요한 방법으로 알려져 왔다. 특히 수술전후 음성질환의 평가에는 음성검사 뿐 아니라, 후두스트로보스코피를 이용하여 비교함으로써 가능하다. 이중 후두스트로보스코피는 방법이 간단하여 직접 수술전후의 변화를 알 수 있는 장점이 있으나, 객관적인 자료로는 이용하기가 어려운 문제점이 있다. 후두스트로보스코피의 영상자료를 컴퓨터에 연결, 영상신호를 디지털화하여 후두의 움직임을 객관적으로 관찰하려고 시도되어왔다 특히 편측 성대마비 환자에서는 성대의 위치가 외전 될뿐만 아니라 피열연골의 위치가 마비 후 시간이 경과됨에 따라 외회전 하고 성대가 전방으로 위축되어 성대 막성부의 길이가 짧아지는 틀의 후두스트로보스코피의 영상을 보이고, 성대폴립환자에서는 수술전후에 폴립의 크기와 성문면적에 변화를 보이게 된다. 본 연구의 목적은 편측 성대마비와 성대폴립과 같은 각기 다른 두 질병에서 음성경사와 후두스트로보스코피를 이용한 이미지 화상분석을 통해 각 성대의 길이, 각도, 성문틈의 면적과 폴립의 크기등을 측정함으로써 수술전후의 차이를 알아보고, 이미지 화상분석과 음성검사 사이에 어떠한 상관관계가 있는지를 알아보고자 하였다. (중략)

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.1
• /
• pp.21-28
• /
• 2006

This paper describes the design and implementation of video conference system using hybrid type P2P(Peer to Peer). The proposed video conference system has hybrid type P2P architecture based on a client-server and P2P(Peer to Peer), where client-server is used for exchange of account management, client list and status information and P2P is used for the real time video conference. The proposed video conference system decreases the traffic of server, and cuts down the load of a network. Because the multimedia data is decentralized to client by P2P. Also, this system is tested by the multi-party video conference system using communication protocol and application software through high speed networks.

• International Journal of Highway Engineering
• /
• v.7 no.1 s.23
• /
• pp.73-82
• /
• 2005

Linear traverse method and point count method described at ASTM have been widely used to estimate the air void system in hardened concrete. These methods, however, are rarely used at present, because they require many efforts and time consuming works. Also these results depend on each person's decision, and are not repeatable. Thus, new image analysis method using microscope and computer processes has been approached for analyzing air void system in hardened concrete. The purpose of this study was to analysis the air void systems in latex-modified concretes using a reasonable and objective image analysis method with main experimental variables such as cement types(ordinary portland cement, rapid setting cement) and latex contents(0%,15%). In the results of this study, the use of polymer latex showed that it could be attributed to its air void systems, due to the fact that the latex emulsion acts as an air-entraining agent, which thus generally guarantees an adequate air-void system.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11a
• /
• pp.87-91
• /
• 1999

Image Analyser를 이용하여 종이표면에 존재하는 특정패턴을 조사하여 이 패턴의 유래를 분석 확인하였다. 종이내에 존재하는 패턴을 Image Analyser에 입력하여 2차원 고속 Fourier 변환처리에 의하여 특징을 추출한 후 잡음으로 간주되는 신호를 제거하여 이를 다시 화상으로 변환시켰다. 재구성된 화상의 패턴이 잡음이 아닌 것을 확인한 후, 이 패턴이 초지기상의 어느부분에서 유래되었는가를 조사.분석하였다. 나아가 이를 바탕으로 초지기의 특정부분의 제반조건을 재설정.조정함으로써 종이품질의 향상은 물론 생산성 향상에도 기여하게 되었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.5
• /
• pp.321-331
• /
• 2015

A study on the application of cooling defect detection was performed on the basis of a preceding study on the heated defect detection in nuclear piping loop system, using lock-in infrared thermography. A loop system with piping defects was made by varying the wall-thinning length, the circumference orientation angle, and the wall-thinning depth. The test was performed using an IR camera and a cooling device. Distance between the cooling device and the target loop system was fixed at 2 m. For analyzing experimental results, the temperature distribution data for cooling, and phase data were obtained. Through the analysis of this data, the defect length was measured. The reliability of the measurements for cooling defect conditions was shown to be higher in the lock-in infrared thermography data than the infrared thermography data.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.121-125
• /
• 2010

The infrared thermography technology rather than traditional nondestructive methods has benefits with non-contact and non-destructive testings in measuring for the fault diagnosis of the rotating machine. In this work, condition monitoring measurements using this advantage of thermography were proposed. From this study, the novel approach for the damage detection of a rotating machine was conducted based on the spectrum analysis. As results, by adopting the ball bearing used in the rotating machine applied extensively, an spectrum analysis with thermal imaging experiment was performed. Also, as analysing the temperature characteristics obtained from the infrared thermography for in-situ rotating ball bearing under the lubrication condition, it was concluded that infrared thermography for condition monitoring in the rotating machine at real time could be utilized in many industrial fields.

• Journal of Engineering Education Research
• /
• v.15 no.4
• /
• pp.66-75
• /
• 2012

The purpose of this study is to analyze the learners' satisfactions of the video conferencing for global engineering education and provide the implications for effective video conferencing. This study analyzed the learners' satisfactions on their participation in the video conferencing. We conducted a questionnaire survey with 132 subjects who studied in the video conferencing universities, and performed interviews with 27 learners. The results include learners wanted to have more practical themes to satisfy their interests; faculty roles among domestic professors and abroad professors should be specified: distance learners should be guided to have diverse interactions among themselves. The implications are explored for the future study and video conferencing practices.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.724-726
• /
• 2004

IPv6 기술은 IPv4의 문제점인 주소고갈, 보안문제 등을 해결하기 위해 제시된 차세대 인터넷 기술이다. IPv6 기술은 현재 프로토콜의 정의가 완료된 상황이지만 사업자들의 이해관계로 인해 아직까지 널리 보급되지 못하고 6Bone 과 같은 시험 망에서만 사용되고 있는 실정이다. 그러나 IPv6는 가까운 미래에 Ipv4를 대체할 것으로 보이며 기존에 있던 IPv4를 기반으로 하는 응용 프로그램들도 IPv6 용으로 새로이 바뀌게 될 것이다. 이러한 배경 하에 본 연구팀은 IPv6 multicast를 기반으로 하는 화상회의 응용프로그램을 개발하였으며 본 논문은 그 개발에 대한 내용을 담고 있다. 본 논문에서는 화상회의 응용프로그램의 전체적인 구조와 구현 시 사용된 기술과 화상회의 플랫폼기술에 대해서 살펴보고 응용프로그램을 바탕으로 측정한 사용 bandwidth 와 delay를 분석해 보도록 하겠다.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.113-117
• /
• 1998

The image recognition, with various technics, recently presented an effective recognition scheme both for image and character. The analyzing process, however, is highly complicated so that this does not utilized fully. This paper examines the validity of the image recognition through morphology, which is simple and a theory of sets. The morphology applies erosion and dilation, opening and closing, and structuring element.