• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.391-396
• /
• 2006

When radioactive wastewater was solidified treatment by cement, the drying rate of cement and the volume reduction ratio was decreased because of boric acid component in the wastewater. In order to supplement the demerit, effects of paraffin wax investigated in this study. Paraffin wax has a hydrophobic properties and a low affinity with inorganic materials. When the radioactive wastewater was tested by a small of wax, the compressive strength of solidified waste are decreased Therefore boric acid in radioactive wastewater are first treated by alkali salt and coated by the stearic acid. During the solidification step, The amount of paraffin wax addition get the result that the compressive strength of solidification with cement was the same as that with paraffin wax. The leaching properties of radioactive waste solidified was the same CFL (cumulative fraction leached), PR (penetration rate), effective diffusivity if paraffin wax content in solidified waste was 20% or 25%.

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.291-297
• /
• 2013

ZnO nanowires were synthesized by vapor-liquid-solid (VLS) process using ZnO and graphite powders on the sapphire substrate coated with an Au film as a catalyst. ZnO nanowires had two prominent emission bands; i) near-band edge (NBE) emission band at 380 nm, and ii) a relatively stronger deep level (DL) emission band ($I_{NBE}/I_{DL}$ <1). In order for the ZnO nanowires to be utilized as an effective material for UV emitting devices, the photoluminescence intensity of NBE needs to be improved with the decreased intensity of DL. In the current study, hydrogen plasma treatment was performed to improve the photoluminescence characteristics of ZnO nanowires. With the hydrogen plasma treatment time of more than 120 sec, the extent of performance improvement was gradually decreased. However, the intensity ratio of NBE to DL ($I_{NBE}/I_{DL}$) was significantly improved to about 4 with a relatively short plasma treatment time of 90 sec, suggesting hydrogen plasma treatment is a promising approach to improve the photoluminescence properties of ZnO nanowires.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.71-71
• /
• 2011

전류를 흘렸을 때 양극과 음극에 따라 움직이는 미세한 나노입자를 이용하여 색, 글자, 그림 등을 표시하는 응용디스플레이 기술이 전기영동디스플레이(electrophoretic display)이다. 최근 전자종이 등 상품화가 진행되면서 전기영동디스플레이에 대한 관심증대와 함께 기술개발이 지속적으로 진행되고 있다. 본 연구에서는 분산중합을 이용하여 $TiO_2$ core 입자에 polystyrene을 shell로 코팅하여 마이크로캡슐형의 전기영동디스플레이에 적합한 입자를 제조하고 성능을 분석하였다. 먼저 분산제의 종류, 모노머의 농도, 개시제의 농도에 따라 제조된 대전복합입자의 크기 및 분포를 보면, 분산제의 종류를 달리 하였을때를 제외하고 대체로 균일하였다. 입경의 변화를 보면, 약 200-300nm의 $TiO_2$가 개질에 의해 400-500nm의 입경을 나타내는 것으로부터 200nm 두께의 shell층을 갖는다는 것을 확인 할 수 있었다. 또한 분산제의 종류에 따라서는 분산제를 사용하지 않는 경우가 오히려 제조된 입자의 분포가 균일함을 알 수 있었고 모노머의 농도에 따른 변화는 볼 수 없었으며 입경분포가 균일한 입자가 제조되었음을 알 수 있었다. 대전복합입자의 TGA 곡선으로부터 $300^{\circ}C$ 부근에서 polystrene shell에 의한 분해를 볼 수 있었고 $600^{\circ}C$ 이후에 잔류된 core의 $TiO_2$ 입자를 확인 할 수 있었다. 이 결과로부터 $TiO_2$ core-polystyrene shell형의 전자 종이용 대전복합입자의 제조를 확인 할 수 있었다. 또한 제조된 대전복합입자의 zeta potential을 보면, (+)전하를 띄며 64.8mV의 비교적 높은 zeta potential을 가지는 것을 확인 할 수 있었다. 그리고 $TiO_2$ 대전복합입자와 같은 방법으로 제조된 흑색 대전복합입자를 혼합하여 cell test를 측정한 결과, cell에 ${\pm}$10V의 저전압을 가했을 때에도 비교적 응답속도가 빠른 입자의 구동현상을 확인 할 수 있었다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.488-490
• /
• 2010

최근 심각한 환경오염 문제와 화석 에너지 고갈로 차세대 청정 에너지 개발에 대한 중요성이 증대되고 있다. 그중에서 태양정지는 공해가 적고, 자원이 무한적이며 반 영구적인 수명을 가지고 있어 미래에너지 문제를 해결할 수 있는 에너지원으로 기대되고 있다. 본 연구에서는 P3HT(regioregular poly(3-hexylthiophene))와 PCBM(fullerene derivative [6,6]-phenyl-C61-butyric acid methyl ester)을 전자 도너와 억셉터 물질을 하나의 브랜드로 광 활성층을 형성하는 BHJ(bulk hetero junction)구조를 갖는 고분자 유기 박막 태양전지를 각각 Toluene, Mono-Chlorobenzene, Dichlorobenzene에 $60^{\circ}C$, 200rpm으로 약 12시간동안 1wt%로 교반(Stirring)한 후에 중량비(1:1 wt%)로 혼합하여 스핀코팅(Spin-coating)으로 제작하였고, 완성된 소자의 광활성층 면적은 0.04cm2이며, $150^{\circ}C$에서 후속 열처리 공정을 통해 특성 향상이 측정 되었다. 태양전지 소자 구조는 Glass / ITO / PEDOT:PSS / P3HT : PCBM / Al이다. 전류-전압, FF(Fill Factor), 변환효율 측정을 위해 solar simulator를 AM1.5 조건(100 mW/cm2)으로 이용하였으며, 소자의 최대 전류밀도는 12mA/$cm^2$, 개방전압은 0.566V이고 F.F(Fill Factor)는 55.2%이고 변환효율은 3.7%이다. 후속 열처리후 더욱 좋은 성능을 갖게 되었고, 최대 효율은 Dichl orobenzene일 때 이다.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.667-671
• /
• 2015

Enzyme fuel cells were operated with cells composed of enzyme anode and PEMFC cathode. Enzyme anodes was fabricated by compression of a mixture of graphite particle, glucose oxidase(Gox) as a enzyme and ferrocene as a redox mediator, and then coated with Nafion ionomer solution. Performances of enzyme unit cell were measured with variation of anode manufacture factors, to find optimum condition of enzyme anode. Optimum pressure was 8.89MPa for enzyme anode pressing process. Highest power density was obtained at 60% graphite composition in enzyme anode. Optimum glucose concentration was 1.7 mol/l in anode substrate solution. The enzyme anode was stabilized by two times of deeping in Nafion solution for 1 sec.

• Membrane Journal
• /
• v.11 no.2
• /
• pp.83-88
• /
• 2001

A methodology for enhancing the bond strength of a coating layer with a support has been established in preparing low-pressure reverse osmosis mO) hollow fiber which would experience shear badly in flowing feed un it. Prior to coating process, the support membrane, ultrafiltratiun polysulfone(PS) hollow fibers was pretreated with a reaction solution containing glutaraldehyde (GAl which has a good affinity to the suppurt membrane material as well as a reactivity to some of the cunstituents of cuating layer subsequently formed on the support by interfacial polymerization. Therefore, the reactant GA distributed unifonnly over the support layer through the pretreatment could provide a strong adhesive bond between the coating layer and the support, sticking fast to the support membrane through physical bond and, at the same time, connecting its functional group with the coating laycr by chemical bonding. Due to the strong adhesive bond, the resulting hollow fiber membrane showed an excellent long-tcnn stability in pcnneation.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.4
• /
• pp.87-92
• /
• 2007

A $CaAl_{12}O_{19}:Mn^{4+}$ red phosphor showed the highest emission intensity at a concentration of 0.02mole $Mn^{4+}$ and the high crystallinity and luminescent properties were obtained at $1600^{\circ}C$ firing temperature for 3hr. The synthesized phosphor showed a broad emission band at 658nm wavelength. Red light-emitting diodes(LEDs) were fabricated through the integration of on InGaN UV bare chip and a 1:3 ratio of $CaAl_{12}O_{19}:Mn^{4+}$ and epoxy resin in a single package. This coated LED can be applicable to make White LEDs under excitation energy of UV LED.

• Journal of Environmental Science International
• /
• v.24 no.3
• /
• pp.317-322
• /
• 2015

The photocatalytic decomposition characteristics of toluene, acetone, and methyl mercaptan (MM) by UV reactor installed with $TiO_2$-coated perforated plane were studied. The removal efficiency of single toluene, acetone, and MM vapor was increased with increasing oxygen concentration, but decreased with increasing inlet concentration. Elimination capacity of single toluene, acetone, and MM vapor was obtained to be $628g/m^3{\cdot}day$, $1,041g/m^3{\cdot}day$, and $2,158g/m^3{\cdot}day$, respectively. Also, the photocatalytic decomposition of binary vapor consisted of toluene and acetone, toluene and MM, acetone and MM were observed. Elimination capacity of toluene mixed with acetone, toluene mixed with MM, acetone mixed with toluene, acetone mixed with MM, MM mixed with toluene, and MM mixed with acetone was $327g/m^3{\cdot}day$, $512g/m^3{\cdot}day$, $128g/m^3{\cdot}day$, $266g/m^3{\cdot}day$, $785g/m^3{\cdot}day$ and $883g/m^3{\cdot}day$, respectively. The inhibitory effect of acetone was higher than MM in photocatalytic decomposition of toluene, the inhibitory effect of toluene was higher than MM photocatalytic decomposition of acetone, and the inhibitory effect of toluene was higher than acetone in photocatalytic decomposition of MM.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.425-431
• /
• 2018

Composite particles of porous silica and cerium oxide nanoparticles blocking UV/blue light were prepared through a dry coating process. Various composite particles were prepared by varying conditions such as the mixing ratio of cerium oxide and silica, and the chamber rotating speed of mechano fusion system. The surface morphology of the composite particles was observed with SEM and the composition was analyzed using X-ray fluorescence (XRF). When the cerium oxide/silica composite particles were dispersed in water, the transparency and dispersion stability of the colloidal solution were improved. In addition, the fluidity and spreadability of the particle powder were enhanced by making composite particles. These results show that cerium oxide/silica composite particles can be used as functional cosmetic ingredients for UV/blue light protection.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.411-415
• /
• 2020

In this article, the preparation of hydrogels containing conducting polymer@lignin hybrids and their application to sensing materials were demonstrated using diverse techniques. A conducting polymer, polypyrrole (PPy) was polymerized on the surface of lignin and successful formation was analyzed with Fourier-transform infrared spectroscopy and scanning electron microscopy. Subsequently, PPy@lignin hybrids were mixed with a hydrogel matrix to obtain a conductive hydrogel. The feasibility of using the hydrogel as a sensing material was shown by obtaining reasonable sensing signals using various electrical measurements when adding solvents and solutions to the sensor system. The significance of sensor signals was confirmed with complementary experiments. This study shows that the hydrogel containing the PPy@lignin could be used for sensor applications.