• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.965-973
• /
• 2021

Since radiation therapy is irradiated with high-energy X-rays in a variety of at least 20 Gy to 80 Gy, a high dose is administered to the local area where the tumor is located, and various side effects of some normal tissues are expected. Currently, in clinical practice, lead, a representative material, is used as an effort to shield normal tissues, but lead is classified as a heavy metal harmful to the human body, and a large amount of skin contact can cause poisoning. Therefore, this study intends to manufacture a measurement sheet that can compensate for the limitations of lead using the materials Tungsten, Brass, and Copper of the 3D printer of the FDM (Fused Deposition Modeling) method and to investigate the penetration performance. Tungsten mixed filament transmission measurement sheet size was 70 × 70 mm and thickness 1, 2, 4 mm using a 3D printer, and a linear accelerator (TrueBeam STx, S/N: 1187) was measured by irradiating 100 MU at SSD 100 cm and 5 cm in water using a water phantom, an ion chamber (FC-65G), and an elcetrometer (PTW UNIDOSE), and the permeability was evaluated. As a result of increasing the measurement sheet of each material by 1 mm, in the case of Tungsten sheet at 3.8 to 3.9 cm in 6 MV, the thickness of the lead shielding body was thinner than 6.5 cm, and in case of Tungsten sheet at 4.5 to 4.6 cm in 15 MV. The sheet was thinner than the existing lead shielding body thickness of 7 cm, and equivalent performance was confirmed. Through this study, the transmittance measurement sheet produced using Tungsten alloy filaments confirmed the possibility of transmission shielding in the high energy region. It has been confirmed that the usability as a substitute is also excellent. It is thought that it can be provided as basic data for the production of shielding agents with 3D printing technology in the future.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.346-354
• /
• 2011

This study was carried out to fortify the antimicrobial activity of yoghurt by adding liquorice extract to it. The liquorice extracts (1 mg/mL) showed relatively high antibacterial activity against H. pylori KCCM 40449 (p < 0.05). The solvent liquorice extracts of minimal inhibitory concentrations (MIC) against H. pylori KCCM 40449 were 25- 100 ${\mu}g$/mL. Lactobacillus amylovorus DU-21 with high EPS production ability were inoulated to milk after the addition of different amounts of liquorice extracts (0.0%, 0.05%, 0.1% and 0.2%). The physico-chemical characteristics of yoghurts added with liquorice extracts were examined. The initial pH, titratable acidity, viscosity and viable cell counts of the yoghurt added liquorice extracts were 3.41-3.51, 1.021-1.091%, 1,686-1,930 cp and 9.41-9.38 Log CFU/mL, respectively. The viscosity and syneresis of yoghurt were better than that of the control. Antimicrobial activity against H. pylori KCCM 40449 increased with increasing addition of liquorice extract. However, the sensory score of yoghurt added with different amounts of liquorice extracts was lower than that of the control (p < 0.05). As a result of the sensory evaluations, the flavor, taste, texture, color and overall acceptability of the yoghurt with 0.05% liquorice extract were found to be much better than those of the other groups (p < 0.05). Overall, the optimal amount of liquorice extract added in the manufacture of yoghurt was 0.05% of the total weight. Further studies on increment of antimicrobial activity and palatability of liquorice extract added yoghurt are necessary.

• Journal of Life Science
• /
• v.28 no.11
• /
• pp.1354-1360
• /
• 2018

The aim of this study was to develop a simple, environmentally friendly synthesis of silver nanoparticles (SNPs) without the use of chemical reducing agents by exploiting the extracellular synthesis of SNPs in a culture supernatant of Bacillus thuringiensis CH3. Addition of 5 mM $AgNO_3$ to the culture supernatant at a ratio of 1:1 caused a change in the maximum absorbance at 418 nm corresponding to the surface plasmon resonance of the SNPs. Synthesis of SNPs occurred within 8 hr and reached a maximum at 40-48 hr. The structural characteristics of the synthesized SNPs were investigated by various instrumental analysis. FESEM observations showed the formation of well-dispersed spherical SNPs, and the presence of silver was confirmed by EDS analysis. The X-ray diffraction spectrum indicated that the SNPs had a face-centered cubic crystal lattice. The average SNP size, calculated using DLS, was about 51.3 nm and ranged from 19 to 110 nm. The synthesized SNPs exhibited a broad spectrum of antimicrobial activity against a variety of pathogenic Gram-positive and Gram-negative bacteria and yeasts. The highest antimicrobial activity was observed against C. albicans, a human pathogenic yeast. The FESEM observations determined that the antimicrobial activity of the SNPs was due to destruction of the cell surface, cytoplasmic leakage, and finally cell lysis. This study suggests that B. thuringiensis CH3 is a potential candidate for efficient synthesis of SNPs, and that these SNPs have potential uses in a variety of pharmaceutical applications.

• Journal of The Korean Association For Science Education
• /
• v.39 no.2
• /
• pp.187-195
• /
• 2019

The purpose of this study is to diagnose the operation status of high school integrated science newly introduced in the 2015 revised national curriculum and first applied in 2018, to examine teachers' perception on the new educational policy, and then based on this, extract implications for settling down the policy. A survey was administered to science teachers who participated in the in-service teacher training on integrated science, and the responses of 384 high school science teachers were analyzed. According to the results of the survey, integrated science was allotted six units to each school, and two or more teachers divided achievement standards and were responsible for them in many cases. Science teachers pointed to the increase of student-oriented activities as the biggest change due to the application of integrated science and also showed a positive attitude towards increasing the proportion of performance-based assessment, diversifying evaluation methods, increasing teacher consultations, and enhancing the holistic understanding of natural phenomenon, etc. In particular, teachers with 15 years or more of teaching experience were significantly positive about the increase of student-oriented activities, diverse assessment methods, and opportunities of teacher consultations. For teachers with a sub-major in science, teaching about non-majored contents was the most difficult and it was also difficult to determine the appropriate level of contents to teach. Teachers who majored common science, however, rarely complained about teaching non-majored content. In the case of two teachers in charge of integrated science, there was a statistically significant demand for subject matter knowledge as training content, and for mixed education incorporating theory and practice and customized training as a training method. In the case of one teacher responsible for the subject, there was a relatively lower demand. From these results, some implications for the successful implementation of integrated science were discussed.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.513-521
• /
• 2018

Purpose: The purpose of this study was to assess the effectiveness and complications of an ultrasound-guided axillary brachial plexus block performed by orthopedic surgeons. Materials and Methods: From March to May 2017, an ultrasound-guided axillary brachial plexus block was performed on a total of 103 cases of surgery. A VF13-5 transducer from Siemens Acuson X300 was used. The surgical site was included in the range of the anatomic sensory distribution of the blocked nerve, except for the case where an operation time of more than 2 hours was expected due to multiple injuries and the operation of the upper arm. The procedure was performed by 2 orthopedic surgeons in the same method using 50 ml of solution (20 ml of lidocaine HCl in 2%, 20 ml of ropivacaine in 0.75%, 10 ml of normal saline in 0.9%). The success rate of anesthesia induction during surgery, anesthetic induction time, anatomical range of operation, duration of postoperative analgesia and complications were investigated. Results: The results from the 2 practices were similar. The anesthesia was successful in 100 out of 103 patients (97.1%). In these patients, the average needling time was 5.5 minutes (2.5-13.2 minutes), the average induction time to complete anesthesia was 18.4 minutes (5-40 minutes), and the average duration of postoperative analgesia was 402.8 minutes (141-540 minutes). The post-anesthesia immediate complications were dizziness in 1 case, nausea and vomiting in 4 cases, and peri-oral numbness in 2 cases, but surgery was performed without problems. All these 7 cases with complications recovered on the same day. A total of 3 cases failed with anesthesia, and they were treated by an injection with local anesthesia in the operation room in 2 cases and switched to general anesthesia in 1 case. Conclusion: An ultrasound-guided axillary brachial plexus block, which was performed by orthopedic surgeons allows anesthesia in a brief period and the high success rates of anesthesia for certain surgeries of the elbow and surgeries on forearm, wrist and hand. Therefore, it can reduce the waiting time to the operating room. This technique is a relatively safe procedure and dose selective anesthesia is possible.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.701-711
• /
• 2020

Purpose: In this study, the risk of flammability of a liquid mixture was experimentally confirmed because the purpose of this study was to confirm the increase or decrease of the flammability risk in a mixture of two substances (combustible+combustible) and to present the risk of the mixture. Method: Flash point test method and result processing were tested based on KS M 2010-2008, a tag sealing test method used as a flash point test method for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was Japan's TANAKA. The flash point was measured with a test equipment that satisfies the test standards of KS M 2010 with equipment produced by the company, and LP gas was used as the ignition source and water as the cooling water. In addition, when measuring the flash point, the temperature of the cooling water was tested using cooling water of about 2℃. Results: First of all, in the case of flammable + combustible mixtures, there was little change in flash point if the flash point difference between the two substances was not large, and if the flash point difference between the two substances was low, the flash point tended to increase as the number of substances with high flash point increased. However, in the case of toluene and methanol, the flash point of the mixture was lower than that of the material with a lower flash point. Also, in the case of a paint thinner, it was not easy to predict the flash point of the material because it was composed of a mixture, but as a result of experimental measurement, it was measured between -24℃ and 7℃. Conclusion: The results of this study are to determine the risk of mixtures through experimental studies on flammable mixtures for the purpose of securing the effectiveness of the details of the criteria for determining dangerous goods in the existing dangerous goods safety management method and securing the reliability and reproducibility of the determination of dangerous goods Criteria have been presented, and reference data on experimental criteria for flammable liquids that are regulated in firefighting sites can be provided. In addition, if this study accumulates know-how on differences in test methods, it is expected that it can be used as a basis for research on risk assessment of dangerous goods and as a basis for research on dangerous goods determination.

• 한국사회정책
• /
• v.20 no.3
• /
• pp.77-115
• /
• 2013

The purpose of this study is to present empirical evidence for discussion of financing social welfare via estimating optimal tax burden in the main member countries of the OECD by using Hausman-Taylor method considering endogeneity of explanatory variables. Also, the author produced an international tax comparison index reflecting theoretical hypotheses on revenue-expenditure nexus within a model to compare real tax burden by countries and to examine feasibility of tax increase in Korea. As a result of the analysis, the higher the level of tax burden was, the higher the level of welfare expenditure was, indicating the connection between high burden and high welfare from the aspect of scale. The results also indicated that the subject countries recently entered into the state of low tax burden. Meanwhile, Korea had maintained low burden until the late 1990s but the tax burden soared up since the financial crisis related to the IMF. However, due to the impact of foreign economy and the tax reduction policy, it reentered into the low-burden state after 2009. On the other hand, the degree of social welfare expenditure's reducing tax burden has been gradually enhanced since the crisis. In this context, the current optimal tax burden ratio of Korea as of 2010 may be 25.8%~26.5% of GDP based on input of welfare expenditure variables, a percent that Korea was investigated to be a 'high tax burden-low ITC' country whose tax increase of 0.7~1.4%p may be feasible and that the success of tax system reform for tax increase might be higher probability when compare to others. However, measures of increasing social security contributions and consumption tax were analyzed to be improper from the aspect of managing finance when compared to increase in other tax items, considering the relatively higher ITC. Tax increase is not necessarily required though there may be room for tax increase; the optimal tax burden ratio can be understood as the level that may be achieved on average when compared to other nations, not as the "proper" level. Thus, discussion of tax increase should be accompanied with comprehensive understanding of models of economic developmental difference from nations and institutional & historical attributes included in specific tax mix.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.2
• /
• pp.155-161
• /
• 2021

This study was attempted to investigate natural materials with antimicrobial activity and to apply as natural preservatives in cosmetics. The disc diffusion method was used to search for nine species of natural antibacterial material for three species of skin pathogenic bacteria (Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa) and Candida albicans. As a result of measuring the size of inhibition zone, Rhus Semialata gall (Gallnut) extract, Oak vinegar, and ε-polylysine were showed strongest antibacterial activities (> 10 mm). The Minimum Bactericidal Concentration (MBC) of gallnut and oak vinegar ranged from 10 to 20 mg/mL and from 20 to 40 mg/mL against five human skin pathogens. The MBC of ε-polylysine ranged from 0.5 to 2 mg/mL in fungus. The synergic effect of gallnut extract/oak vinegar mixture and gallnut extract/ε-polylysine mixture were evaluated by checkerboard test. Compared to when used alone, the MBC of gallnut extract/oak vinegar mixture were at 4 times lower concentration against E. coli, C. albicans, and A. brasiliensis. Also Furthermore, the MBC of gallnut extract/ε-polylysine mixture were at 4 times lower concentration against C. albicans and A. brasiliensis. It was confirmed that the combination of gallnut extract with oak vinegar or ε-polylysine resulted in synergistic antibacterial effect against three human skin pathogens. Thus, it is expected that gallnut extract and natural product mixture can not only demonstrate antibacterial synergies, but also be applied in cosmetics as a natural preservative system with a wide antibacterial spectrum.

• Resources Recycling
• /
• v.30 no.4
• /
• pp.54-63
• /
• 2021

Vanadium and tungsten can be obtained by separating/recovering the leaching solution from a spent SCR DeNO_X catalyst using the soda roasting-water leaching process. Therefore, in this study, the adsorption/desorption mechanism of vanadium and tungsten in an ion-exchange column was investigated using Lewatit MonoPlus MP 600, a strong basic anion exchange resin. The operating conditions for the separation of vanadium and tungsten in the ion-exchange column was intended to present. By conducting a continuous adsorption experiment in a pH 8.5 solution, the adsorption capacity of vanadium and tungsten was found to be 44.75 and 64.92 mg/(g of resin), respectively, which showed that the adsorption capacity of tungsten was larger than that of vanadium because of the difference in ion charge. Vanadium has a higher affinity for MP 600 than tungsten. Consequently, as the vanadium-containing solution is eluted through the ion exchange resin onto which tungsten is adsorbed, the adsorbed tungsten is exchanged with vanadium and desorbed. A continuous experiment was performed with a solution of vanadium and tungsten prepared at the same concentration as the spent SCR DeNO_X catalyst leachate. The adsorption capacity of vanadium was found to be 48.72 mg/(g of resin) and 80% of the supplied vanadium was adsorbed; in contrast, almost no tungsten was adsorbed. Therefore, vanadium and tungsten were separated effectively. The ion exchange resin was treated with 2 M HCl at 15 mL/h, and 97.7% of the vanadium(99% purity) could be desorbed. After desorption, NH₄Cl was added to precipitate ammonium polyvanadate at 90℃ and recover 93% of the vanadium.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.116-124
• /
• 2022

In this study, waste air containing ethanol and hydrogen sulfide, was treated by an integrated hybrid system composed of two alternatively-operating UV/photocatalytic reactor-process and biofilter processes of a biofilter system having two units with an improved design (R reactor) and a conventional biofilter (L reactor). Both a pressure drop (△p) per unit process of the integrated hybrid system and a microbe-population-distribution of each biofilter process were observed. The △p of the UV/photocatalytic reactor process turned out very negligible. The △p of the L reactor was observed to increase continuously to 4.0~5.0 mmH₂O (i.e., 5.0~6.25 mmH₂O/m). In case of R reactor, its △p showed the one below ca. 16~20% of the △p of the L reactor. Adopting such microbes-carrying biofilter media with high porosity as waste-tire crumb media, and the improved biofilter design, contributed to △p of this study, reduced by ca. 37~50% and 40~53%, respectively, from the reported △p of conventional biofilter packed with biofilter media of the mixture (50:50) of wood chip and wood bark. In addition, the △p of R reactor in this study, reduced by ca. 80% from the reported △p of conventional biofilter packed with biofilter media of the mixture (75:25) of scoria with high porosity and compost, was mainly attributed to adopting the improved biofilter design. On the other hand, in case of L reactor, the CFU counts in its lowest column was analyzed double as much as those in any other columns. However, in case of R reactor, its CFU counts were bigger by 50% than the one of L reactor and its microbes were evenly distributed at its higher and lower columns of R_dn reactor and R_up reactor. This phenomena was attributed to an even moisture distribution of 50~55% of R reactor at its higher and lower columns. Therefore, R reactor showed superb characteristics in terms of both △p and microbe-population-distribution, compared to L reactor.