• Title/Summary/Keyword: 혼합제

Search Result 3,207, Processing Time 0.03 seconds

A Study for the Quality Improvement of Concrete Using Fly-Ash High Volume (플라이애시를 다량 치환한 콘크리트의 품질향상에 관한 연구)

  • Lee, Joung-Ah;Park, Jong-Ho;Chung, Yoong;Park, Bong-Soon;Han, Min-Cheol;Han, Cheon-Goo
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.11a
    • /
    • pp.601-604
    • /
    • 2008
  • This study as using admixture (G), high early strength agent, calcium hydroxide {a(OH)2} and fine particle cement, etc which have been newly developed for the purpose of quality improvements like the improvement of early strength of concrete that the FA was substituted by 20%, etc, reviewed the possibility of the utilization in the great quantity and the results are summarized as the followings. Slump loss by the kind of mixing material of high early strength agent and Ca(OH)$_2$ showed the smaller width of decrease than that of plain to appear the improved results and fine particle cement and G admixture showed the large slump loss. Air contents were appeared to satisfy the target air contents at all mixing materials. Regarding the compressive strength of the concrete by the kind of mixing material, G admixture was appeared to be highest all on aging 3 days, 7days and 28days at the initial strength. And fine particle cement and high early strength agent showed higher strength increase rate on aging 3days than plain but showed that the increase of strength becomes gradually dulled as aging is increased. And Ca(OH)$_2$ had almost no effect.

  • PDF

An Experimental Study on Surfactant Enhanced LNAPL Removal Behavior in Saturated Zone (계면활성제를 이용한 포화지층내 저비중 비수용성 유기용매의 제거거동에 관한 연구)

  • 이재원;박규홍;박준범;임경희
    • Journal of the Korean Geotechnical Society
    • /
    • v.15 no.5
    • /
    • pp.291-300
    • /
    • 1999
  • Surfactant flushing for enhancing the removal of BTEX from contaminated sand/clay mixtures was investigated. Eight soil columns packed with relatively undisturbed BTEX contaminated soils, were leached with water, methyl alcohol and then flushed with surfactant with or without several additives. Initial concentrations of BTEX mixture range from 278mg/kg to 1975mg/kg. Initial BTEX removal efficiency was 98% when the contaminated soil was flushed with water of 850 pore volumes. Because of tailing effect, water flushing could not remove below 8mg/kg concentrations during the experimental period. Eventually, the most effective surfactant for flushing was turned out to be 4% SOFTANOL(equation omitted)-90 with 3% ethyl alcohol and 3% SXS. In interrupted flow conditions, the removal efficiency was 99.5% with the flushed water of 95 pore volumes. The BTEX mixture removed from the soil columns during the surfactant flushing ranges from 84.5% to 99.5% of the initial amount for both water leaching(850 pore volumes) and surfactant flushing(95-165 pore volumes), respectively. Test results indicated that surfactant flushing could enhance the removal of BTEX mixture from contaminated soils and could reduce the aqueous phase BTEX mixture concentration in leachate.

  • PDF

Effects of Organic Selenium Mix on the Performance, Carcass Characteristics, Tissue Selenium Distribution, and Economic Value in Finishing Hanwoo Steers (유기셀레늄 혼합제 급여가 비육말기 거세한우의 성장, 도체성적, 체내 셀레늄 분포 및 경제성에 미치는 영향)

  • Kim, D.K.;Jung, D.U.;Sung, H.G.
    • Journal of Animal Science and Technology
    • /
    • v.47 no.6
    • /
    • pp.975-984
    • /
    • 2005
  • This study fulfilled to investigate the feed efficiency, tissue selenium distribution, carcass characteristic and economic value in finishing Hanwoo steers fed organic selenium mix (OSM) which included seleno-yeast, rumen culture and other microbial supplements. Forty five finishing Hanwoo steers were tested for 4 months dividing to three feeding groups: OSM add as 0.5 ppm Se of DM feeds (0.5 ppm OSM), OSM enriched add as 1.0 ppm Se of DM feeds (1.0 ppm OSM) and basal diet without OSM (control). The total weight gains, the average daily gains and the feed intakes were not differ in treatments (p > 0.05). No differences (p > 0.05) were noted for hot carcass weight, loin eye area, backfat thickness, meat yield index, meat color, fat color, tenderness and maturity. However, the 1.0 ppm OSM showed better performances for feed requirement, TDN per gain, meat yield grade and meat quality grade compared to other groups. Tissue selenium distribution was increased by organic selenium feeding: higher Se concentration in liver and rump of 0.5 ppm OSM (p < 0.05), and kidney, liver, sirloin and rump of 1.0 ppm OSM (p < 0.05) than the tissues of control group. Generally, tissue selenium was the highest value in 1.0 ppm OSM and showed higher concentrate in order; kidney, liver, sirloin and rump. The income over feed cost was 1.06-fold higher in 1.0 ppm OSM than control group. In conclusion, organic selenium mix supplementation and its amounts were not influenced to feed intake, body gain and carcass characteristic but significantly increased tissue selenium. Therefore, these results suggest that finishing Hanwoo steer fed an enriched organic selenium mix with proper probiotics is able to produce “high-Se” beef as high bioavailable form as well as create a beneficial opportunity on Hanwoo farm.

Control effect of the Mixture of Bacillus amyloliquefaciens M27 and Plant Extract against Cucumber Powdery Mildew (Bacillus amyloliquefaciens M27과 식물천연물 혼합제에 의한 오이 흰가루병의 방제 효과)

  • Lee, Sang Yeob;Weon, Hang Yeon;Kim, Jeong Jun;Han, Ji Hee;Kim, Wan Gyu
    • The Korean Journal of Pesticide Science
    • /
    • v.17 no.4
    • /
    • pp.435-439
    • /
    • 2013
  • Bacillus amyloliquefaciens M27 was selected as a control agent for the biological control of cucumber powdery mildew. The new mixture of B.amyloliquefaciens M27 and plant (Eucalytus) extract was developed to improve the control activity of B.amyloliquefaciens M27 against cucumber powdery mildew. The mixed formulation showed the high preventive and curative control effect against cucumber powdery mildew when it was diluted at 500 times and foliar-sprayed. Its control effect was higher in preventive spraying than curative spraying. When 500-fold diluted solution of the formulation was sprayed preventively four times at five-day intervals, three times at seven-day intervals and twice at ten-day intervals, the diseased leaf area was shown to be 4.4%, 8.0%, 27.9%, respectively; Whereas the diseased leaf area in the control plot was 45.4%. When the 500-fold diluted formulation was sprayed curatively four times at five-day intervals, three times at seven-day intervals and twice at ten-day intervals after occurred cucumber powdery mildew, the diseases leaf area was 11.5%, 25.2%, 51.8%, respectively; whereas in the control plot, the diseases leaf area was 64.3%. When the 500-fold diluted formulation was treated four times at five-day intervals in the plastic house, its control effect was higher than that treated three times at seven-day intervals and twice at ten-day intervals. As the results, the mixed formulation of B.amyloliquefaciens M27 and plant extract could be a promising candidate of bio-fungicides for the environment-friendly control of powdery mildew of cucumber.

Bayesian Analysis for the Error Variance in a Two-Way Mixed-Effects ANOVA Model Using Noninformative Priors (무정보 사전분포를 이용한 이원배치 혼합효과 분산분석모형에서 오차분산에 대한 베이지안 분석)

  • 장인홍;김병휘
    • The Korean Journal of Applied Statistics
    • /
    • v.15 no.2
    • /
    • pp.405-414
    • /
    • 2002
  • We consider the problem of estimating the error variance of in a two-way mixed-effects ANOVA model using noninformative priors. First, we derive Jeffreys' prior, a reference prior, and matching priors. We then provide marginal posterior distributions under those noninformative priors. Finally, we provide graphs of marginal posterior densities of the error variance and credible intervals for the error variance in two real data set and compare these credible intervals.

Study on the Internal Mixing Flow Characteristics for Recess Length in a Swirl Coaxial Injector (스월 동축형 인젝터에서 리세스 길이에 따른 내부 혼합 유동의 특성 연구)

  • Kim, Sung-Hyuk;Yoon, Jung-Soo;Yoon, Young-Bin
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2010.11a
    • /
    • pp.13-18
    • /
    • 2010
  • This study aim to investigate the internal mixing flow characteristics by recess length of swirl coaxial injector for gas generator has propellant of Kerosene-LOx. Recess length is a very important element, have influence in spray stability and LOx post damage. The influence of recess length was analyzed by visualizing internal flow and measuring liquid film thickness and manifold pressures. Also, frequency characteristics were analyzed by liquid film thickness measurement with mixing time.

  • PDF

Development of "Bt-Plus" Biopesticide Using Entomopathogenic Bacterial (Xenorhabdus nematophila, Photorhabdus temperata ssp. temperata) Metabolites (곤충병원세균(Xenorhabdus nematophila, Photorhabdus temperata ssp. temperata)의 대사물질을 이용한 "비티플러스" 생물농약 개발)

  • Seo, Sam-Yeol;Kim, Yong-Gyun
    • Korean journal of applied entomology
    • /
    • v.50 no.3
    • /
    • pp.171-178
    • /
    • 2011
  • Bacillus thuringiensis (Bt) is a bacterial biopesticide against insect pests, mainly lepidopterans. Spodoptera exigua and Plutella xylostella exhibit significant decreases in Bt susceptibility in late larval instars. To enhance Bt pathogenicity, we used a mixture treatment of Bt and other bacterial metabolites which possessed significant immunosuppressive activities. Mixtures of Bt with culture broths of Xenorhabdus nematophila (Xn) or Photorhabdus temperata ssp. temperata (Ptt) significantly enhanced the Bt pathogenicity against late larval instars. Different ratios of Bt to bacterial culture broth had significant pathogenicities against last instar P. xylostella and S. exigua. Five compounds identified from the bacterial culture broth also enhanced Bt pathogenicity. After determining the optimal ratios, the mixture was applied to cabbage infested by late instar P. xylostella or S. exigua in greenhouse conditions. A mixture of Bt and Xn culture broth killed 100% of both insect pests when it was sprayed twice, while Bt alone killed less than 80% or 60% of P. xylostella and S. exigua, respectively. Other Bt mixtures, including Ptt culture broth or bacterial metabolites, also significantly increased pathogenicity in the semi-field assays. These results demonstrated that the Bt mixtures collectively names "Bt-Plus" can be developed into potent biopesticides to increase the efficacy of Bt.

Determination of Visible Marker in Petroleum Using HPLC (HPLC를 이용한 석유제품 내의 가시적 식별제 분석)

  • Lim, Young-Kwan;Kim, Dong-Kil;Yim, Eui-Soon;Shin, Seong-Cheol
    • Applied Chemistry for Engineering
    • /
    • v.21 no.3
    • /
    • pp.306-310
    • /
    • 2010
  • Petroleum visible markers (dye) have been used to distinguish different fuel classes and to prevent illegal mixing. It is difficult to recognize the real color of visible marker when the small amount of petroleum product was mixed in another fuel oil. In this study, we determined the two wavelengths (370 nm, 645 nm) which detect all Korean petroleum visible marker using UV/Vis spectrophotometer. Then we analyzed the visible marker using high performance liquid chromatography (HPLC) in two wavelength detectors. Also, we optimized the analytic method for petroleum visible marker in illegal mixed fuel oil.

Improving Soil Washing/flushing Process using a Mixture of Organic/inorganic Extractant for Remediation of Cadmium (Cd) and Copper (Cu) Contaminated Soil (유/무기산 혼합용출제를 이용한 중금속(카드뮴,구리)오염토양 처리공법(soil washing/flushing) 개선에 대한 연구)

  • Lee, Hong-Kyun;Kim, Dong-Hyun;Jo, Young-Hoon;Do, Si-Hyun;Lee, Jong-Yeol;Kong, Sung-Ho
    • Journal of Soil and Groundwater Environment
    • /
    • v.14 no.2
    • /
    • pp.17-25
    • /
    • 2009
  • The applicability of soil washing/flushing to treat a contaminated soil with cadmium (Cd) and copper (Cu) using a mixture of organic/inorganic extractant was evaluated in laboratory-scale batch and column tests. Citric acid was the effective extractant to remove Cd and Cu from the soil among various organic acids except EDTA. Carbonic acid was chosen as inorganic extractant which was not only low toxicity to environment, but also increasing soil permeability. Moreover, the optimum ratio of organic and inorganic extractant to remove Cd and Cu was 10 : 1, and this ratio of organic and inorganic extractant achieved removal efficiencies of Cd (46%) and Cu (39%), respectively. The increasing flow rate of extractant could explain the phenomena of soil packing when carbonic acid was used with organic extractant (i.e. EDTA and citric acid). Therefore, a mixture of organic extractant with inorganic extractant, especially carbonic acid, could resolve a problem of soil packing when this extractant was applied to a field application to remove Cd and Cu using in-situ soil flushing process.

Improvement of Anodic Performance by Using CTP Binder Containg Nickel (니켈을 함유한 콜타르 피치 결합제를 이용한 미생물연료전지 산화전극 성능개선)

  • Yoon, Hyung-Sun;Song, Young-Chae;Choi, Tae-Seon
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.37 no.9
    • /
    • pp.499-504
    • /
    • 2015
  • The composite anodes of expanded graphite (EG) and multiwall carbon nanotube (MWCNT) for microbial fuel cells were fabricated by using coal tar pitch (CTP) binder containing nickel (Ni), and the effect of the anodes with the binders on the performance of the MFCs were examined in a batch reactor. During the start-up of the MFCs, quick increase in voltage was observed after a short lag phase time, indicating that the CTP binder is biocompatible. The biomass attatched on the anode surface was more at higher Ni content in the binder, as well as at smaller amount of CTP binder for the fabrication of the anode. The internal resistance of the MFC was smaller for the anode with more biomass. Based on the results, the ideal combination of CTP and Ni for the CTP binder for anode was 2 g and 0.2 g, respectively. The maximum power density was $731.8mW/m^2$, which was higher 23.7% than the anode with Nafion binder as control. The CTP binder containing Ni for the fabrication of anode is a good alternative in terms of performance and economics of MFCs.