• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.4
• /
• pp.316-324
• /
• 1985

Vacuum-packed and seasoned smoked-dried products of red squid, Ommastrephes bartrami, caught in the Northern Pacific Ocean, were prepared and stored at room temperature for 90 days to test their keeping quality. Defrosted squids were eviscerated, skinned, and cut. The mantle meats were flavored with seasoning powders prepared from sugar, sorbitol, salt, monosodium glutamate, or smoke flavor (Smoke-EZ, Alpha Foods Co., Ltd.). After seasoning, the mantle meats were dried at $45^{\circ}C$ for 7 hours, vacuum packed in plastic film bags, and pasteurized in water at $95^{\circ}C$ for 30 minutes. Three kinds of products were prepared : control products (seasoned-dried), solid smoked seasoned-dried and liquid smoked seasoned-dried. The moisture level, water activity, color value (L, a and b value), texture, and viable cell counts of bacteria in these products were determined during storage at room temperature, $5^{\circ}C\;and\;35^{\circ}C$, respectively. The results showed that the products could be preserved at good condition for 90 days though they developed pale brown color during storage. The contents of free amino acids, nucleotides and their related compounds, and the compositions of fatty acids of raw squid and smoked products were analysed. In the amino acids, arginine, taurine, glycine and proline were abundant in raw and smoked products. The contents of hypoxanthine of raw and smoked products were higher than the other nucleotides and their related compounds. In fatty acid compositions of raw and smoked products, the dominant fatty acids were docosahexaenoic acid (22:6), hexadecanoic acid(16:0) and eicosapentaenoic acid (22:5).

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.819-828
• /
• 2007

Two experiments were conducted to observe the effects of direct fed microbials on metabolic characteristics in sheep and milking performance in dairy cows. A metabolic trial with four ruminally cannulated sheep(60±6kg) was conducted in a 4×4 Latin square design to investigate the supplementation effects of Saccharomyces cerevisiae, Clostridium butyricum or mixed microbes of S. cerevisiae and C. butyricum on ruminal fermentation characteristics and whole tract digestibility. Sheep were fed 1.25 kg of total mixed ration(TMR, DM basis) supplemented with S. cerevisiae (2.5g/day), C. butyricum (1.0g/day) or its mixture(S. cerevisiae 1.25g/day+C. butyricum 1g/day), twice daily in an equal volume. But control sheep were fed only TMR. A feeding trial with 28 lactating Holstein cattle was also conducted for 12 weeks to investigate the effects of the same microbial supplements as for the metabolic trial on milking performance. The cows were fed the TMR(control), and fed S. cerevisiae(50g/day), C. butyricum(15g/day) or its mixture (S. cerevisiae 25g/day + C. butyricum 7.5g/day) with upper layer dressing method. Total VFA concentration and the digestibility of whole digestive tract in the sheep increased by supplementation of S. cerevisiae, C. butyricum or their combined microbials compare to control group. The proportion of propionic acid at 1h(P<0.039) and 3h(P<0.022) decreased by supplementation of S. cerevisiae while tended to increase acetic acid proportion at the same times. Daily dry matter intake(DMI) was not influenced by the microbial treatments, but milk yield(P<0.031) and feed efficiency(milk yield/DMI, P<0.043) were higher for the cow received C. butyricum than those for other treatments. The milk fat content was higher (P<0.085) when cows fed S. cerevisiae(4.11%) than that fed the control (4.08%), the diets with C. butyricum (3.85%) and the microbial mixture. Based on the results obtained from the current experiments, supplementation of C. butyricum or mixture with S. cerevisiae might be increased milk fat content and milk productivity of lactating daily cows. (Key words:Saccharomyces cerevisiae, Clostridium butyricum, Fermentation characteristics,

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.2
• /
• pp.59-70
• /
• 1998

Two-dimensional trend-vector model of sediment transport is first tested in the tidal flat of Garolim Bay, mid-western coast of the Korean Peninsula. Three major parameters of surface sediment, i.e., mean grain size, sorting and skewness, are used for defining the best-fitting transport trend-vector on the sand ridge and muddy sand flat. These trend vectors are compared with the real transport directions determined from morphology, field observation and bedforms. The 15 possible cases of trend vectors are calculated from total sediments. In order to find the role of coarse sediments, trend vectors from sediments coarser than < 4.5 ${\phi}$, (sand size) are separately calculated from those of total sediments. As compared with the real directions, the best-fitting transport-vector model is the "case M" of coarse sediments which is the combined trend vectors of two cases: (1) finer, better sorted and more negatively skewed and (2) coarser, better sorted and more positively skewed. This indicates sand-size grains are formed by simpler hydrodynamic processes than total sediments. Transported sediment grains are better sorted than the source sediment grains. This indicates that consistent hydrodynamic energy can make sediment grains better sorted, regardless of complicated mechanisms of sediment transport. Consequently, both transported vector model and real transported direction show that the source of sediments are located outside of bay (offshore Yellow Sea) and in the baymouth. These source sediments are transported through the East Main Tidal Channel adjacent the baymouth. Some are transported from the subtidal zone to the upper tidal flat, but others are transported farther to the south, reaching the south tidal channel in the study area. Also, coarse sediment grains on the sand ridge are originally from the baymouth, and transported through the subtidal zone to the south tidal channel. These coarse sediments are moved to the northeast, but could not pass the small north tidal channel. It is interpreted that the great amount of coarse sediments is returned back to the outside of the bay (Yellow Sea) again through the baymouth during the ebb tide. The distribution of muddy sand in the northeastern part of study area may result from the mixing of two sediment transport mechanisms, i.e., suspension and bedload processes. The landward movement of sand ridge and the formation of the north tidal channel are formed either by the supply of coarse sediments originating from the baymouth and outside of the bay (subaqueous sand ridges including Jang-An-Tae) or by the recent relative sea-level rise.

• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.317-323
• /
• 1994

Nine plant foods (persimmon leaf, perilla seed, Chinese quince, ginger root, walnut, mugwort leaf, arrowroot, buckwheat and sorghum) rich in phenolic substances were examined for their effects on the digestive enzymes, food-poisoning bacteria and mutagenicity/antimutagenicity by Ames test. Among tested samples, Chinese quince significantly inhibited the $\alpha-amylase$ activity (97%), exhibiting an uncompetitive inhibition type. Protease activity was inhibited by Chinese quince (86%), persimmon leaf (51%) and mugwort leaf (20%), in which mugwort extract exhibited a noncompetitive type. Lipase was activated >50% by all samples. The inhibition of $\alpha-amylase$ was highly correlated with the content of condensed tannin (r=0.89) and the inhibition of protease, with total phenolic content (r=0.84). Total phenolies fraction of tested samples showed the growth inhibition toward E. coli. Streptococcus faecalis and Salmonella enteritidis, in which the effect of perilla, sorghum and arrowroot was the highest for E. coli. Standard phenolics and food samples did not show any mutagenicity toward Salmonella typhimurium TA98 and TA100. Tannic acid inhibited the mutation of the two strains by benzo[a]pyrene whereas total phenolics fractions of Chinese quince and walnut exhibited antimutagenicity to a lesser extent.

• Korean Journal of Weed Science
• /
• v.3 no.2
• /
• pp.208-222
• /
• 1983

To control ideally the weeds in orchards and systematize the utility of herbicides, the mixing effect of oxyfluorfen and paraquat was evaluated. Combinations of oxyfluorfen with paraquat were increased the control efficacies at any treatment without giving damage to fruit trees and appeared a synergism. The control effects were reduced from 80-90% to 40-60% as the time advanced. However, the relative synergistic index was higher at 60 days after treatment in preemergence treatment and at 90 days after treatment in early and late postemergence treatment, respectively. Also the index was relatively higher at lower dosage of both herbicides.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.2
• /
• pp.117-126
• /
• 1999

Hampyong Bay is a semienclosed and macrotidal bay which opens to the eastern Yellow Sea through a narrow inlet in the southwestern coast of Korea. In order to understand the tidal-flat sedimentation in the semienclosed setting, morphology, sediments, accumulation rate and sea cliff erosion were investigated in the tidal flat of Hampyong Bay. The tidal flat of Hampyong Bay lacks intertidal drainage systems, and generally shows the concave-upward profile whose relief is designated by marked morphological features such as high-tide beaches, intertidal sand shoals and tidal creeks. Surfacial sediments of the tidal flat mainly consist of mud, sandy mud, gravelly mud, gravelly sand and muddy gravel, thus showing the textural characteristics of multimodal grain-size distribution, poorly sorting and positive skewness. The sediments generally coarsen landward due to the increase in coarse fraction content. Sedimentary structures are deeply bioturbated, but parallel lamination and lenticular bedding are locally found in the mudflat near mean low water line. Annual accumulation rates across the tidal flat (along Line SM) average -5.2 cm/yr with a range of -45.8~+4.2 cm/yr, indicating that the tidal flat is erosional. In general, erosion rates of upper and lower tidal flat are higher than those of middle tidal flat. Seasonally, the erosion rates are much higher during spring and winter when dominant wind direction corresponds to the long axis of Hampyong Bay. Sea cliffs are eroded at a rate of 1.4 m/yr. The biggest sea cliff erosion generally occurs 1~2 months later after tidal flats were extensively eroded. Such erosions of tidal Oats and sea cliffs in the semienclosed bay setting are interpreted to be due to wind waves coupled with local sea-level rise.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.4
• /
• pp.257-268
• /
• 2012

The EFDC model with find grid resolution system connecting the Gyeong-Gi bay and Han River estuary was constructed to study on spring-neap variability of net volume transport at each channel of the Han River estuary. The simulation time of numerical model is 124 days from May to August, 2009 with freshwater discharge at Han, Imjin and Yeseong River. The calibration and verification of model results was confirmed using harmonic components of water level and tidal current. The net volume transport was calculated during 30 days with normal freshwater conditions at Seokmo channel and Yeomha channel around Ganghwado. The ebbing net volume transport of 44% and 56% is drained into Gyeong-Gi bay through Yeomha and Seokmo channel, respectively. The ebbing net volume transport nearby Seodo at Yeomha channel convergence flooding net volume transport at Incheon harbor, and drain (westward direction) through channel of tidal flat between Ganghwado and Yeongjongdo to the Gyeong-Gi bay. The averaged net volume transport during 4 tidal cycles was compared to variation of spring-neap periods of the Yeomha channel. The convergence position is moved up- and down-ward according to spring-neap variability. The movement of the convergence zone is appeared because 1) increasing of discharged rate tidal flat channel between Ganghwado and Yeongjongdo at the spring period, 2) The growth of barotropic forcing with downward direction at the spring tide, and 3) The strength of the baroclinic pressure gradient is greater than spring with mixing processes.

• Korean journal of food and cookery science
• /
• v.18 no.1
• /
• pp.43-50
• /
• 2002

This study was carried out to evaluate the quality attributes of frozen soy yogurts prepared by freezine soy yogurts, which are made of different types of Bifidobacteria (B. bifidum, B.breve, B. infantis) and oligosaccharides (fructooligosaccharides, galactooligosaccharides, isomaltooligosaccharides) containing $\alpha$-chymotrypsin treated soy protein isolate were evaluated in terms of overrun, melt-down quality, changes in the total number of Bifidobacteria after freezing, and sensory evaluation. The quality attributes of soy yogurts were also evaluated in terms of changes in the number of viable cells of Bifidobacteria in soy yogurts after incubation at 37$\^{C}$, pH 3.0 for 90 min, water holding capacity, and viscosity. The overrun of frozen soy yogurts fermented by B. bifidum showed the hiehest value but those fermented by B. infantis showed the lowest, while the melt-down quality of soy yogurts were vice versa. The total numbers of Bifidobacteria after freezing for 30 min in ice cream maker showed more than 10$\^$9/ CFU/ml. In sensory evaluation, all $\alpha$-chymotrypsin treated frozen soy yogsurt showed little beany flavor. In sour, sweet, and bitter tastes and mouth feel, the frozen soy yogurts fermented by B. bifidum evaluated better but those fermented by B. infantis evaluated worse. Also in the overall quality, the frozen soy yogurts fermented by B. bifidum were evaluated desirable but those fermented by B. infantis were evaluated undesirable. The water holding capacity and viscosity of soy yogurts fermented by B. bifidum showed the highest values but those fermented by B. infantis showed the lowest values. The total numbers of Bifidobacteria of all soy yogurts decreased from 10$\^$9/ CFU/ml to 10$\^$8/ CFU/ml after incubation at 37$\^{C}$, pH 3.0 for 90 min.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.1
• /
• pp.25-35
• /
• 1989

To prepare a new type of fish sauce from skipjack scrap, it was examined the effect of koji on the sauce flavor, conditions of low salt fish sauce processing and the changes of taste com-pounds during its fermentation. To prepare the skipjack scrap sauce, chopped skipjack head paste was mixed with $6.6\%$ skipjack viscera, $26.9\%$ koji, $71\%$ of $25\%$ brine, $13.3\%$ salt and $7.6\%$ glucose, and fermented at $25\pm4^{\circ}C$ for 90 days. The same process was also carried out to prepare the low salt skipjack scrap sauce adding $7.6\%$ sorbitol, $0.3\%$ lactic acid and $9.8\%$ ethyl alcohol instead of $13.3\%$ salt. The major free amino acids in the products were glutamic acid, Iysine, valine, phenylalanine, alanine, leucine and isoleucine at 90 days of fermentation. And the contents of total free amino acids in both products were 3,307mg/00m1, 3,637.1mg/100m1 at 90 days of fermentation. The predominating non-volatile organic acids showed in the products were lactic acid, succinic acid, pyroglutamic acid, which were $90\%$ over contents of the total non-volatile organic acids. Total non-volatile organic acid contents in both products were 1,002.1mg/100ml, 1,312.9mg/100m1 at 90 days of fermentation. During fermentation of sauce, ADP, AMP and IMP were decreased, while inosine and hypoxanthine were increased. The major taste compounds of the products were rove진ed free amino acids and non-volatile organic acids. The nucleotides and their related compounds, total creatinine, betaine, TAMO and sugar were seemed to be having an auxiliary role in taste of those products. Fishy odor in skipjack scrap sauce can be improved by adding koji. And the low salt skipjack scrap sauce ($9.12\%$ of salt contents) can be prepared by the replacement of a part of salt with sorbitol, lactic acid and ethyl alcohol. From the results of sensory evaluation and chemical experiments, the skipjack scrap sauce products supposed to be at least equal to the sold soy sauce on the market in quality.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.