• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.163-170
• /
• 2008

The aeroelastic stability analysis of a soft-in-plane, composite hingeless rotor blade in hover and in forward flight has been performed by combining the mixed beam method and the aeroelastic analysis system that is based on a moderate deflection beam approach. The aerodynamic forces and moments acting on the blade are obtained using the Leishman-Beddoes unsteady aerodynamic model. Hamilton's principle is used to derive the governing equations of composite helicopter blades undergoing extension, lag and flap bending, and torsion deflections. The influence of key structural modeling issues on the aeroelastic stability behavior of helicopter blades is studied. The issues include the shell wall thickness, elastic couplings and the correct treatment of constitutive assumptions in the section wall of the blade. It is found that the structural modeling effects are largely dependent on the layup geometries adopted in the section of the blade and these affect on the stability behavior in a large scale.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.603-607
• /
• 2011

Structure of flashback and reignition occurring near flameholder was experimentally investigated in a model combustor with V-gutter flameholder. The combustor has a long duct shape with cross section of $40{\times}40mm$ and City Nature Gas(CNG) were used as fuel. Measurements of chemiluminescence with high speed camera was used for visualization of flame structure. In the lean case, flashback distance depend on equivalent ratio. New flame occurred at the front tip of flameholder when flashback. Flashback flame moved toward downstream direction of combustor because mixture flow velocity had increased, and then re-ignition was caused by entering flow into recirculation zone that is formed behind the flameholder.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.21 no.1
• /
• pp.17-30
• /
• 1993

The basic processes responsible for the generation of oceanic fronts were reviewed. In particular the process of a shelf sea front produced by tidal stirring was identified from the one dimensional model of the water column in the coastal area, which incorporates the microscale process for the formation of a tidal front. Also a new criterion to predict its location was suggested. The time evolutions of the distributions of density and turbulent kinetic energy calculated from the model show that the criterion for the formation of a thermocline can be predicted as $R{\delta}^4$~ constant for large $\delta$ ($\delta$＞0.5), but the dependence on $\delta$ decreases as $\delta$ goes to O, where $R=H^4Q/{K_b}^3$,{\;}{\delta}=1-Do/H$, Q is the buoyancy flux at the surface, $K_b$ is the eddy diffusivity maintained at the bottom and Do is the depth of a thermocline in the absence of bottom mixing. The depth of a thermocline was found to decrease as the bottom mixing increases for a given value of Do. The results were interpreted in comparison with the previous studies.

• The Journal of Natural Sciences
• /
• v.11 no.1
• /
• pp.151-157
• /
• 1999

The study was investigated the improved printing effect of heat transfer ability for the cotton fabric treated with disperse dyes. Some important factors were studied to determine the most optimal conditions such as concentration of dye, treated time and temperature, after treatment and before treatment using swelling agent, and molecular weight of dye. The fastness to laundering and light for heat transfer printing was measured.The optimal conditions of heat transfer printing for cotton fabric treated with disperse dye were concentration of 5% owf, treated temperature of $200^{\circ}C$, treated time of 3 minute. The diffusion of disperse dyes inside cotton fabric was accelerated as a result of swelling agent such as glycerin, ethylene glycol, tetramethylene glycol, propylene glycol using in this study. The effects of heat transfer printing were increased that the increasement of before treatment time for swelling agent, decrease of molecular weight of dye.

• Elastomers and Composites
• /
• v.45 no.4
• /
• pp.298-308
• /
• 2010

The mechanical properties and surface characteristics of parylene thin film were improved using Xylydene-based dimers (DPX-C, DPX-D, and DPX-N). A single-parylene-C, D, N film and a hybrid chemical and physical parylene thin films in which two types are mixed were manufactured for each dimer by adjusting the deposition conditions and the thickness of the thin film by input. Parylene was deposited by chemical vapor deposition (CVD) and the thermal characteristics of the single thin film and the hybrid thin film were compared by thermal analysis. The mechanical properties of the thin films were characterized by tensile strength, elongation, and tear force tests, and the surface characteristics of the thin films were evaluated by contact angle and surface energy measurements. The hybrid chemical parylene thin film in which two types are mixed can complement the strengths and weaknesses of the different dimers, while the physical parylene thin film can freely adjust the thin film characteristics of the coated surface and the opposite surface.

• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.59-65
• /
• 2021

This study intends to find a positive effect on the learning of elementary school students by developing the exhibition contents of on-offline museum. This on-offline museum contents were combined with existing exhibit types and direct experience elements, and the theory of [blended learning]. Through this study, analyzing the limitations of existing online museum and finding with experiment to see if the new contents had a learning effect compared to the existing online museum. As a result of the experimental study, the content with a [direct experience] was counted as a high satisfaction and frequency index, and the [play] and [experience] type of direct experience contents showed higher satisfaction than the indirect experience type contents. Through this study, we want to provide new implications and development possibilities in the development of contents that online museums can provide, and to promote various effects on children's education.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.3
• /
• pp.259-264
• /
• 1990

Improvement in production, post-harvest processing, quality grading, storage and malting process of malting barley is apparantly necessary to upgrade the beer quality and to reduce the losses in malt production. To establish the bases for the improvement, the present study examined the effect of storage conditions on the germinability of malting barley by quality grade of barley at production, and feasibility of mixing different varieties and different quality grades. Germinability of malting barley decreased significantly after 13 months of storage in the off-grade grain storage house, and after 15 months in the 1st grade storage house under the climate of Korea. Malting barley that was off-grade at harvest deteriorated faster than the 1st grade during 5 years storage under ordinary conditions. Mixing of varieites, different grain-quality grades or differently stored barleys seems to increase variability in germinating forces and germinability, resulting in uncontrollable malting processes and poor quality of malts and beer.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.46-53
• /
• 2017

This paper deals with an acoustic model for a lean premixed gas turbine combustor composed of three stages: premixing chamber, nozzle and flame tube. Our model is given as an acoustic transfer function whose input is a heat release rate perturbation and output is a velocity perturbation at a flame location. We have shown that the resonance frequencies are functions of three round-trip frequencies of acoustic wave in each stage, and area ratios between stages. By analyzing poles of the acoustic transfer function, we could characterize resonant frequencies and their dependency on various system parameters of a combustor. It was found that our analytic findings match with existing numerical and experimental results in literature.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.41-48
• /
• 2014

Leak of liquid has been categorized conventionally into instantaneous release and continuous release. In this study, the spread of cryogenic liquid due to limited period of release is investigated for the first time to establish a new classification method with recognizing the irrationality of the conventional one. Such physical phenomena are governed by simultaneous equations concerning volume, radius and height of pool of the cryogenic liquid, and major parameters are evaporation rate per unit area, time of release, and spill quantity. The simultaneous governing equations is decoupled to get efficiently perturbation solutions. As the results, for the same spill quantity, in view of release model, combined release model that consists of continuous and consecutive instantaneous model is necessary with small time of release, while continuous model is solely required with large time of release. Also, the combined model is necessary for small spill quantity with the same time of release. These two regimes of release are clearly distinguished using the perturbation solution to provide a clear basis for the new classification of release models.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.20-20
• /
• 2010

GTA (Gas Tungsten Arc)용접은 불활성 분위기에서 용접이 이루어지기 때문에 타 아크용접법에 비해 용접부 품질이 우수하여 고품질이 요구되는 산업분야에 널리 이용되고 있다. 하지만 스테인리스강으로 pipe를 제조하기 위해 GTA 용접을 적용할 경우, Laser 및 고주파 용접 (HFIW)에 비해 용접부 품질 및 용접속도가 낮기 때문에 pipe를 제조하는 산업에서 적용에 제한을 받고 있다. 하지만, GTA는 laser 혹은 HFIW에 비해 가격이 1/10수준으로 낮고, 용접부 gap tolerance 및 용접면 관리범위가 넓은 장점이 있기 때문에 GTA의 용접속도 및 용접품질을 향상시키기 위한 연구가 꾸준히 진행되고 있다. 일반적으로 스테인리스강 GTA용접 시 용접속도를 향상시키기 위해, 모재의 성분 제어 (합금성분 최적화-Al, S, Se, O등), Flux 도포 기술 (산화물을 용접전에 도포하여 용접속도 향상) 및 혼합보호가스 적용 등이 있다. 스테인리스강 용접 시 보호가스로는 용접부 품질을 확보하기 위해 Ar을 주로 사용하고 있다. 하지만 용입 특성을 향상시키기 위해 아크의 온도를 높일 수 있는 He, 혹은 $H_2$ gas를 단독 혹은 혼합하여 사용하고 있다. 오스테나이트계 스테인리스의 경우 용입특성을 향상시키기 위해 Ar에 $H_2$를 2~10%정도 혼합하여 사용하고 있다. 페라이트계 스테인리스강은 수소에 대한 고용도가 상대적으로 작아 용접부 수소 취화를 일으킬 수 있기 때문에 적용에 제한을 받고 있어 그 대안으로 산소를 극히 소량을 혼합하여 용입성 향상에 대한 연구가 보고 되고 있다. 따라서 본 연구에서는 페라이트계 스테인리스강의 용입특성을 향상시킬 목적으로 Ar에 산소를 미량 첨가 (1%미만) 하여 용접전류 및 산소 함량에 따른 용입특성의 변화에 대해 연구하였다. 또한 기계적인 물성 및 부식특성을 평가하였고, 최종적으로 실용화 가능성을 파악하기 위해 용접전극의 수명 테스트를 실시하였다. 실시한 결과, 산소가 첨가량 증가 할수록 용입특성은 상승하였으며, 기계적인 물성 또한 산소를 첨가하지 않은 경우에 비해 거의 유사한 값을 얻을 수 있었다, 하지만 산소함량이 증가 할수록 전극의 수명은 감소하여 교체주기가 증가함을 알 수 있다. 본 연구를 통해 얻어진 기술을 상용화시키기에는 극복해야할 문제가 있지만, 소재 합금성분 설계 시 용접생산성 향상위한 산소성분 범위를 제시할 수 있으리라 판단된다.