• Journal of Korea Water Resources Association
• /
• v.44 no.2
• /
• pp.109-123
• /
• 2011

In this study, 2D finite volume model, which can apply to the mixed meshes that is effective to treat the complicated topography such as a natural river, is developed. To do so, an algorithm for finding the neighbouring cell of a computational cell is introduced, and fluxes are computed using the HLLC approximate Riemann solver at each interface between a computational cell and it's neighbouring cells. Moreover, in order to numerically treat the bed slope which has important effect on the balance between flux gradients and sourte terms, different formula to compute the bed slope for rectangular and triangular mesh are applied. The developed model is applied to analyze dam-break in an experimental channel with $90^{\circ}$ bend and Malpasset dam-break in France. The two cases consist of mixed meshes and the suggested method is validated for the experimental channel and natural channel by comparison with the experimental data, field data and computed results.

• Journal of Korea Foresty Energy
• /
• v.24 no.1
• /
• pp.28-32
• /
• 2005

This study was performed to find a new use of wood tar from the manufacturing process of wood charcoal. Plywoods made of phenol adhesives mixed with wood tar were manufactured, and physical, mechanical properties and formaldehyde emission were investigated. Plywoods made of phenol adhesives mixed with wood tar were almost same as an original phenol adhesive in physical and mechanical properties and tensile-shear adhesive strength of the plywood was higher than the original one in both non-waterproof and waterproof tests. Formaldehyde emission was lower as the amount of wood tar increased in phenol adhesive.

• The Journal of Korean Association of Computer Education
• /
• v.16 no.4
• /
• pp.1-11
• /
• 2013

The purpose of this study is to investigate a structural relationship among elementary students' self-determinant learning motivation, teaching-presence and learning outcomes (learning satisfaction, persistence) in blended learning environment. Participants were 5th and 6th grade students who enrolled in a mathematics learning service. The results showed that self-determinant learning motivation had direct effect on teaching presence, learning satisfaction and learning persistence. Teaching Presence had an direct effect on learning satisfaction and learning satisfaction had an direct effect on learning persistence. Based on the results, proper strategies were recommended to facilitate self-determinant learning motivation and teaching presence before and during learning since they play critical roles for the success of elementary students learning outcomes in a blended learning environment.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.1
• /
• pp.87-94
• /
• 2002

In the preceding study, a series of results was presented according to factors like as attaching method of main bar, shear span to depth ratio, reinforcing method for different types of region among various factors, which could determine the properties of composite beams. Based on these results, this study was planned to investigate the structural behaviors of according to attaching method of main bar for composite beams(end-reinforced concrete(RC), center-steel concrete (SC)) varying ratio of tensile bar to steel mainly. Consequently, there were little difference according to attaching method of main bar. And as the ratio of tensile bar to steel increase, the efficiency of strength was high, but ductile capacity of beams could deteriorate. Therefore, to maximize the structural properties of composite beams, it was considered that the ratio of tensile bar to steel should be limited.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1033-1040
• /
• 2011

The premixed burner is a very strong candidate for using household boiler burner system because it has high efficiency, low emission and can be used in compact boiler system. Usually, household boiler burner systems use a Bunsen burner, which consists of an inner rich premixed flame and fuel burned completely by a secondary air supply. It has a relatively long flame length and operates in a high excess of air, so it is difficult to fit such a burner into a high efficiency compact boiler. In this paper, the characteristics of a premixed combustion burner for surface media such as metal fiber, ceramic, and SUS fin were evaluated. In particular, the flow velocity over the burner surface for the cold flow characteristics of the surface material were measured and adjusted. The combustion tests were carried out by taking pictures of the flame and measuring the flame temperature. The amounts of CO and NO were measured and the characteristics of the surface burner materials, combustion chamber, and heat exchangers were evaluated for various excess air ratios and heating values.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.151.2-151.2
• /
• 2012

터보펌프 구동에 사용된 가스발생기 생성가스를 연소기로 공급하여 주추력 발생에 사용하는 다단연소 사이클 로켓엔진은 고추력을 요하는 우주 발사체에 널리 사용되고 있다. 다단연소 사이클 로켓엔진에 사용되는 가스발생기를 예연소기라 부르며 케로신과 액체산소를 추진제로 하는 다단연소 사이클 로켓엔진에는 산화제 과잉 예연소기가 사용된다. 예연소기는 터보펌프 구동을 목적으로 하기 때문에 예연소기 생성가스의 횡단면 온도분포는 터빈에 의해 제한되는 온도범위 내에서 균일하여야 하며 넓은 운전영역에서 안정적인 연소가 이루어져야 한다. 산화제 과잉 예연소기는 모든 추진제가 혼합헤드를 통해 분사되는 방식과 추진제를 혼합헤드와 연소실로 나누어 공급하는 방식이 있다. 기술검증을 위해 산화제 일부와 연료를 혼합헤드를 통해 연소실에 공급하여 1차 연소시키고 나머지 산화제를 연소실 냉각채널을 거쳐 연소실 중앙의 분사공을 통해 연소실로 주입하여 기화시키는 형태로 최종적으로 연소압 20MPa, 혼합비 60에서 작동하는 산화제 과잉 예연소기를 설계하여 연소시험을 수행하였다. 혼합헤드에는 별도의 점화용 분사기 없이 전체 연료 분사기를 통해 점화용 연료인 TEA/TEB 혼합물을 분사하여 점화하였다. 추진제를 2단으로 공급할 수 있도록 고안된 가압식 연소시험 설비에서 10회, 누적 60초 이상의 연소시험이 성공적으로 수행되었다. 연소시험결과 넓은 작동영역에서 안정적 연소특성과 생성가스 온도 분포의 균일성을 확인할 수 있었다. 고온 고압의 산화제 과잉 예연소기 기술 확보를 통해 케로신/액체산소 다단연소 사이클 로켓엔진 개발을 위한 기술적 기반을 마련하였다.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.479-490
• /
• 2021

This study was attempted to identify the essence of the mixed practice experience that replaces the clinical practice of nursing students in the COVID-19 situation. From December 17, 2020 to December 31, 2020, eight nursing students were individually interviewed to collect data, and the data were analyzed by applying Colaizzi's phenomenological analysis methodology. The study's finding derived 6 categories. The specific categories were 'Accepting in anxiety', 'Autonomy at the fore', 'Straining non-face-to-face practice', 'Fill your knowledge', 'A variety of approaches to achieve goals', 'The best practice left with regret'. In the pendemic situation, nursing students accepted clinical practice substitution with anxiety and concern about mixed practice, and experienced a way to adapt to practice through self-directed learning and to achieve the goal of clinical practice.

• 한국연소학회:학술대회논문집
• /
• 2000.05a
• /
• pp.57-66
• /
• 2000

OH radical and NO distributions have been measured in methane/air partially premixed counterflow flames(${\alpha}$=1.0, 0.8, 0.6) using PLIF technique. The results are discussed and compared with the numerical analysis results obtained under the same flame conditions. Measured OH and NO LIF signals agree with the computed concentration distributions. Both numerical and experimental results indicate that the structural change in a flame alters the NO formation characteristics of a partially premixed counterflow flame. The nitrogen dilution also changes flame structure, temperature and OH radical distributions and results in the decreased NO concentrations in a flame. The levels of decrease in NO concentrations, however, depends on the premixedness(${\alpha}$) of a flame. The larger change in the flame structure and NO concentrations have been observed in a premixed flame($\alpha$=1.0), which implies that the premixedness is likely to be a factor in the dilution effect on NO formation of a flame.

• Korean journal of food and cookery science
• /
• v.3 no.2
• /
• pp.59-67
• /
• 1987

In order to make use of Job's tears widely, Job's tears starch was analyzed and determinded the contents of amylose, amylographical and other physicochemical properties. And also the yeast breads and rice cakes were made from flour and rice flours with various mixing ratios of Job's tears flour and then they were tested for suitability to preparation of bread and rice cake. 1. The starch contents of Job's tears showed 12~20%. Which was about one third of rice or waxyrice starch. But amounts of crude proteins, fats, and total ashes in Job's tears were higher than rice or waxyrice. Job' tears starch was composed of amylopectins only, and was similar to that of waxyrice starch. 2. Depends upon the Amylogram of each starch, initial gelatinization temperature of Job's tears starch was the highest among three starches of rice, waxyrice, and Job's tears. Maximum viscosity of Job's tears starch was 860BU, then it was about two times of rice starch viscosity. 3. By the sensory evaluation results, the taste of bread prepared with mixing of 10% Job's tears flour was better than flour bread and the volume and grains of the bread made from mixing of 10%, 20% Job's tears flour were similar to that of flour bread, but the taste, volume and grains of bread made from 30% mixed flour were undesirable. The rice cake Prepared from mixed flour with 25% Job's tears flour has shown to be desirable.

• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.995-1006
• /
• 2022

The purpose of this study was to investigate the current status of practical course operation in a non-face-to-face online environment, learning effects, and students' experiences and perceptions for radiology major students using a survey. The questionnaire consisted of a total of 34 items in 5 areas: general characteristics of subjects, current learning participation in non-face-to-face environments, learning satisfaction, learning outcomes, improvement and requirements. For the analysis of the questionnaire responses, frequency analysis was performed on the response frequency, ratio, and scale for each item. Based on the general characteristics of the survey respondents, cross-analysis was performed using the chi-square test for participation in non-face-to-face learning, learning performance, and learning satisfaction. implemented. Improvements and requirements were qualitatively analyzed for the repetition frequency of words with the same meaning. Through the results of analyzing the responses of a total of 397 questionnaires, the direction of design and development of practical classes in a non-face-to-face environment in the future and basic information and implications for efficient operation were confirmed. Based on this, it is necessary to continue to think and make efforts for the efficient operation of non-face-to-face practice classes in the post-corona era.