• Title/Summary/Keyword: 혼합면

Search Result 916, Processing Time 0.03 seconds

An Analysis of Differences in Learning Participation and Presence according to Academic Achievement in the Flipped Learning-based Non-Face-To-Face Classes (플립러닝 기반 비대면 수업에서 학업성취도에 따른 학습참여 및 실재감 차이 분석)

  • Kim, Kyong-Ah;Kim, Ji Sim;Ahn, You Jung
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2022.01a
    • /
    • pp.139-140
    • /
    • 2022
  • 코로나 팬더믹의 장기화에 따른 비대면 환경에서 대면 수업의 실재감을 제공하는 다양한 교수·학습 방법에 대한 시도가 이루어지고 있다. 실제 수업 현장에서는 대면수업과 다른 환경에서 학습자의 수준과 특성에 맞는 수업 설계의 필요성 또한 대두되고 있다. 본 연구에서는 플립러닝을 기반으로 한 비대면 프로그래밍 수업에서 학업성취도에 따른 학습 참여 수준과 실재감의 차이를 분석하여, 맞춤형 학습역량 강화를 위한 교수 방안을 모색하는 데 그 목적이 있다. 강의 동영상 수업과 상호작용을 포함한 플립러닝 기반 실시간 수업을 혼합하여 수업한 후 설문을 통해 학업성취도에 따른 학습자들의 학습 참여 수준, 교수 실재감과 학습 실재감을 조사한 결과, 학업성취도 가장 높은 학습자일수록 학습 참여도 높고, 다음 수준의 학습자들이 교수 실재감과 학습 실재감은 가장 높은 것으로 조사·분석되었다. 이를 통해 학업성취도에 기반하여 학습자별 맞춤형 교수방안을 제시하였다.

  • PDF

A Case Study of Faculty Advisor's non Face-to-face Counseling during Coronavirus Incubation Period - SNS Counseling Applied Photovoice- (코로나19로 인한 지도교수의 비대면 상담 사례 연구 - 포토보이스 기법을 활용한 SNS 상담을 중심으로-)

  • Kwak, Huyn-Joo;Koh, Eun-Hyeon
    • Journal of Convergence for Information Technology
    • /
    • v.10 no.11
    • /
    • pp.202-209
    • /
    • 2020
  • Due to Corona 19, non-face-to-face education was conducted at general universities, so it was necessary to conduct non-face-to-face faculty advisor counseling. SNS counseling using photovoices was conducted in the 6th session and FGI for 10, 3rd graders in the early childhood education department of a college in the metropolitan area. The results of the study analyzing students' perceptions of the counseling and content of the counseling are as follows. First, the research participants positively recognized the SNS counseling that applied the photovoice technique. Second, they gradually adapted to non-face-to-face daily life and learning and evaluated the positive aspects, but they complained of fear in career and employment. A non-face-to-face counseling strategy and follow-up studies were proposed through this case study.

Comparison of Sea Surface Temperature from Oceanic Buoys and Satellite Microwave Measurements in the Western Coastal Region of Korean Peninsula (한반도 서해 연안 해역에서의 해양 부이 관측 수온과 위성 마이크로파 관측 해수면온도의 비교)

  • Kim, Hee-Young;Park, Kyung-Ae
    • Journal of the Korean earth science society
    • /
    • v.39 no.6
    • /
    • pp.555-567
    • /
    • 2018
  • In order to identify the characteristics of sea surface temperature (SST) differences between microwave SST from GCOM-W1/AMSR2 and in-situ measurements in the western coast of Korea, a total of 6,457 collocated matchup data were produced using the in-situ temperature measurements from marine buoy stations (Deokjeokdo, Chilbaldo, and Oeyeondo) from July 2012 to December 2017. The accuracy of satellite microwave SSTs was presented by comparing the ocean buoy data of Deokjeokdo, Chilbaldo, and Oeyeondo stations with the AMSR2 SST data more than five years. The SST differences between the microwave SST and the in-situ temperature measurements showed some dependence on environmental factors, such as wind speed and water temperature. The AMSR2 SSTs were tended to be higher than the in-situ temperature measurements during the daytime when the wind speed was low ($<6ms^{-1}$). On the other hand, they showed positive deviation increasingly as the wind speed increased for nighttime. In addition, increasing tendency of SST differences was related to decreasing sensitivity of microwave sensors at low temperatures and data contamination by land. A monthly analysis of the SST difference showed that unlike the previous trend, which was known to be the largest in winter when strong winds were blowing, the SST difference was largest in summer in Deokjeokdo and Chilbaldo buoy stations. This seemed to be induced by differential tidal mixing at the collocated matchup points. This study presented problems and limitations of the use of microwave SSTs with high contribution to the SST composites in the western coastal region off the Korean peninsula.

A Study on Geology and Clay Minerals of the Landslide Area in the Munhyun-dong, Nam-gu, Pusan (부산시 남구 문현동 산사태 지역의 지질 및 점토광물에 대한 연구)

  • 황진연;김선경;김춘식
    • Journal of the Korean Geotechnical Society
    • /
    • v.15 no.1
    • /
    • pp.113-125
    • /
    • 1999
  • In this study the occurrence and mineralogical characteristics of clay minerals from the Munhyun-dong landslide area in Pusan city were examined by XRD, SEM, and chemical analyses. Several types of clay minerals such as halloysite, vermiculite, mica/vermiculite interstratified mineral, vermiculite/smectite interstratified mineral, kaolinite and illite are found abundantly in the area. The occurrence of clay minerals suggest that they have been formed by weathering of andesite which is the bedrock of the area. It is believed that halloysite was formed in the early stage of weathering, and vermiculite, mica/vermiculite interstratified mineral and mica/vermiculite interstratified mineral were formed in the middle stage, and finally, kaolinite was formed. The clay minerals occurring in the central part of the landsliding area and within the slip surface are dominated by expandable minerals such as halloysite, vermiculite and vermiculite/smectite interstratified mineral. These clay minerals expand by absorbing water and effectively decrease the shear resistance of the rock mass, and therefore, they could be an important factor for the landslide. The analyses of geology and mineralogical characteristics of the area suggest that the landslide was caused by combination of various factors including steep slope, heavy rainfall, abundant joints, alteration of the rocks, and occurrence of expandable clay minerals. The result of this study suggests that the investigation for the prevention of possible landslide must include the examination of clay mineralogy as well as the site geology.

  • PDF

The shelf life of 1,2-indandione/zinc and polyvinylpyrrolidone solutions used to develop latent fingermarks deposited on the surface of thermal paper (감열지에 부착된 잠재지문을 현출하는데 사용하는 1,2-indandione/zinc와 polyvinylpyrrolidone 용액의 보존기한)

  • Hong, Sungwook;Kim, Yujin;Kim, Hyunjung;Kim, Hyerim;Lee, Junchul;Yu, Seoungho
    • Analytical Science and Technology
    • /
    • v.30 no.6
    • /
    • pp.312-318
    • /
    • 2017
  • The shelf life of 1,2-indandione/zinc (1,2-IND/Zn) solution and polyvinylpyrrolidone (PVP) solution, which are known as reagents for developing latent fingermarks deposited on the surface of thermal paper, was studied. The standard latent fingermarks used for comparisons were artificial latent fingermarks printed on thermally sensitive and non-sensitive surfaces with the same intensity. Upon treatment of standard latent fingermarks with the pre-mixed 1,2-IND/Zn and PVP solutions, the fingermarks could be successfully developed until 3 days after the preparation of the mixture. However, from the third day after mixing the reagents, blackening was observed on the surface of the thermal paper, indicating deterioration of the reagent performance. The 1,2-IND/Zn and PVP solutions separately stored without mixing in advance were mixed immediately before use, and the development efficiency of the latent fingermarks deposited on the surface of thermal paper was observed. The performance of the PVP solution decreased after 20 days from the preparation of the reagent. It was also found that the shelf life of 1,2-IND/Zn and PVP mixture was determined by the PVP solution. The effect of oxygen and moisture on the degradation of PVP was investigated. It was found that the performance of the PVP solution deteriorated because of the influence of moisture, though it was not affected by oxygen.

Stability Evaluation of Weathered Gneiss Soil Slopes according to Clay Content (점토함유량에 따른 편마풍화토 비탈면의 안정성 평가)

  • Hyunsu Park;Byeongsu Kim
    • Journal of the Korean GEO-environmental Society
    • /
    • v.24 no.10
    • /
    • pp.15-23
    • /
    • 2023
  • In this study, the infiltration behavior of slopes composed of mixed soils with clay contents of 0%, 5%, and 10% in weathered Gneiss soil, which is a representative weathered soil in Korea, was investigated, and the stability of unsaturated slopes due to rainfall infiltration was examined. For this, in this study, the soil water characteristic curve was obtained through the water retention test, and the strength constant was obtained through the triaxial compression test. Based on the obtained results, the influence of clay content and antecedent rainfall effect (i.e., initial suction) on the formation of saturated zone (i.e., wetting band) and slope stability due to rainfall infiltration was examined through infiltration and stability analyses. As a result, it was found that the hig her the initial suction, the slower the formation of the saturated zone on the slope. In addition, it was found that as the clay content increases, the shear strength of the ground increases and the resistance to rainfall infiltration increases, and eventually the slope stability is greatly improved.

A Study on the Characterisitics of Modoo-Oriented Training Model of a Mixed Type in Non-Face-To-Face Tele-Practical Classes (비대면 원격 모바일 홈페이지 실습수업에서 혼합형 방식의 모두(modoo) 활용 중심 수업의 특성 연구)

  • Lee, Hee-Young
    • Journal of the Korea Convergence Society
    • /
    • v.12 no.8
    • /
    • pp.105-113
    • /
    • 2021
  • Due to the recent coronavirus outbreak, many universities in Korea have started to implement remote education. Accordingly, the Ministry of Education has stated its plans to continuously encourage and maintain remote learning as the future innovation model for education and suggested the need for a diverse range of remote learning models. However, studies on the development of practical learning models have not been carried out actively until now. Particularly, there are not many case studies in the field of design, especially regarding mobile website development. As means to improve the newly designed practice environment, this study therefore proposes the "modoo" project that offers domain creation and online marketing services. As a result of this study, the researcher suggests the use of a mixed(blending) teaching method and realized that the effectiveness of education multiplies when project-based learning and flipped learning is combined appropriately. The research methodology was divided into two big sections, education content and operations, and the effect was evaluated using the course evaluations. The study results confirmed that the applicability will increase given that learning satisfaction levels increased by more than 5% compared to face-to-face learning.

Effect of sulfur addition on Cu2ZnSnSe4 thin film by Pulsed Laser Deposition (PLD를 이용한 CZTS의 박막의 S 첨가의 영향)

  • Jang, Yun-Jung;Amal, M. Ikhlasul;Alfaruqy, M. Hilmy;Kim, Kyoo Ho
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2010.06a
    • /
    • pp.86.1-86.1
    • /
    • 2010
  • Cu2ZnSnSe4는 CIS 태양전지의 In 대체 물질계로 주목을 받고 있는 저가형 태양전지 재료로 장차 차세대 태양전지 재료로 응용이 기대되고 있다. 그러나 에너지 밴드갭이 0.9~1.1eV로 다소 낮아 태양전지 광흡수층 재료로 사용하기 위해서는 wide band gab화 처리가 필요하다. 본 연구에서는 CZTSe에 S를 첨가하여 에너지 밴드갭을 확장하고자 하며, S의 첨가가 CZTSe 박막의 특성에 미치는 영향에 대하여 조사하였다. 실험의 편의성을 도모하고자 펄스레이저 법을 사용하여 증착하였다. 박막 조성 제어에는 Cu, Zn, Sn, Se, S 분말을 볼밀로 분쇄, 혼합하여 균질 혼합상 프리커서를 제조하고 이를 Cold Isostatic Press(CIP) 성형하여 Source target을 사용하였다. Pulsed YAG-Laser를 사용하여 soda lime glass상에 증착하고 조성, 구조, 조직을 관찰하고 에너지 밴드갭, 광흡수계수, 면저항, 전하밀도 등 특성을 조사하였다.

  • PDF

Fabrication of multi-layered electrostatic lens by mixed micromachining technology (혼합 마이크로머시닝기술을 이용한 다층전극구조의 정전렌즈 제작)

  • 이영재;전국진
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.35D no.9
    • /
    • pp.48-53
    • /
    • 1998
  • We have fabricated electrostatic lens with novel structure by mixing surface- and bulk-micromachining technology. Polysilicon was used for both the structure and sacrificial layer, and the structure layer was passivated with thermal oxide in order not to be attacked during the silicon wet etching. Compared with conventional electrostatic lens used in microcolumn, this device has the advantages in ; 1) hole alignment, throughput, reliability, damage of lens, 2) the possibility of arrayed lithography through the integration of microcolumn.

  • PDF

Design of Problem-Based Blended Learning for the Improvement of Software Adaptability (응용소프트웨어 적응력 향상을 위한 문제중심의 B-러닝 설계)

  • Kim, Sun-Nam;Yoo, In-Hwan
    • 한국정보교육학회:학술대회논문집
    • /
    • 2007.08a
    • /
    • pp.129-134
    • /
    • 2007
  • 학교 현장에서의 컴퓨터 교육은 여전히 시범실습위주로 이루어지고 있으며. 초등학교 컴퓨터 교육에서 많은 비중을 차지하는 소프트웨어 교육은 더욱 그러하다. 소프트웨어는 끊임없이 개발되거나 업그레이드 되고 있어 가르쳐야 할 내용이 많아져 새로운 학습방법이 필요하다. 즉 문제사태에서 필요한 기능을 찾아 스스로 문제를 해결하고 다른 응용소프트웨어에 전이 및 파지할 수 있는 능력을 길러주는 학습방법이 필요하다. 그 방법 중의 하나가 구성주의 학습 원리에 부합한 문제중심학습이며 학습의 효과를 높이기 위해서 온라인과 오프라인학습의 장점을 혼합한 B-러닝 방법이 필요하다. 따라서 본 연구는 응용소프트웨어의 적응력을 향상시키기 위해 한글 워드프로세서 학습내용을 학습자의 수준에 맞게 문제중심으로 재구성하고 온라인 학습을 위해 학급커뮤니티를 설계 및 구현하였다. 그리고 문제중심의 B-러닝에 적합한 학습모형을 설계하여 제시하였다. 문제중심의 B-러닝은 구성주의 학습 원리에 적합한 실생활의 문제를 학습내용으로 하고 면대면 교실수업의 장점과 온라인 학습의 장점을 혼합하여 자기주도적으로 탐구학습을 하는 것이므로 응용소프트웨어의 적응력은 향상될 것으로 기대한다.

  • PDF