• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.185.2-186
• /
• 2003

세계적으로 최소가공식품(minimally processed foods)의 시장이 확대되면서, 최소가공된 과채류의 미생물학적 안전성 확보가 중요한 사안으로 대두되고 있다. 이에 본 연구는 김치제조용 원료배추를 모델로 하여 감마선 및 가스치환 포장법을 병용한 절임배추의 미생물학적, 이화학적 특성을 평가하였다. Fresh-cut상태의 절임배추(염농도 3%)를 각각 air, 100% $CO_2$, 25% $CO_2$/75% $N_2$가스를 주입하여 포장한 후 0, 0.5, 1, 2 kGy의 선량으로 감마선 조사하여 3주 동안 저장하면서 분석에 사용하였다. Total aerobic bacteria, coliforms, Salmonella, lactic acid bacteria의 분포를 살펴본 결과, $CO_2$혹은 $CO_2$/$N_2$포장과 감마선을 병용처리한 경우 저장기간 동안 total aerobic bacteria, coliforms 및 Salmonella 모두 1kGy의 선량에서 90% 이상 감소시킬 수 있는 것으로 나타나, 일반 함기포장보다 효과적인 것으로 나타났다. 색도 및 물성은 포장방법에 따른 차이를 보이지 않았으며, pH의 경우도 감마선 조사 및 가스치환 포장시 더욱 효과적으로 유지할 수 있었다. FRAP(ferric reducing antioxidant power) value 및 DPPH radical 소거능과 같은 생리활성 능력을 측정한 결과 포장방법 및 감마선 조사에 의한 차이를 보이지 않았다. 따라서 가스치환 포장 및 감마선 조사를 병용시 함기포장구 보다 낮은 감마선 조사선 량에서 병원성 미생물을 제어할 수 있었으며, 이화학적 품질이 우수하고 저장성이 향상된 절임배추를 제조할 수 있었다.7로 4$0^{\circ}C$ 진공건조와 -7$0^{\circ}C$ 동결건조의 L값 변화보다 큰 변화를 보였고, 또한‘a’값과 ‘b’값의 경우도 마찬가지로 5$0^{\circ}C$ 열풍건조의 경우가 양파의 내부와 외부면의 적색도 및 황색도 변화가 크게 일어나는 경향을 나타내었다. 건조과정 중 vitamin C의 함량변화는 건조에 의한 수분함량의 감소로 vitamin C의 함량은 상대적으로 증가하였고, -7$0^{\circ}C$ 동결건조의 경우가 가장 높은 vitamin C의 증가량을 나타내었고, 그와 반대로 5$0^{\circ}C$ 열풍건조의 경우는 열에 의한 vitamin C의 변화로 인한 상대적 증가량은 감소하는 경향을 나타내었다.아현미가 더욱 조밀하였다. 10시간 탈삽처리에서 상품성이 우수하였다. 그러나 25'E 28시간 탈삽처리는 탈삽의 균일도가 다른 처리에 비해 떨어지는 경향이었다. 경우, 사과표피의 색도 변화를 현저히 지연시킴을 확인하였다. 또한 control과 비교하여 성공적으로 사과에 코팅하였으며, 상온에서 보관하여을 때 사과의 품질을 30일 이상 연장하는 효과를 관찰하였다. 이들 결과로부터 대두단백질 필름이 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성요 소를 지닌 병렬적 합성어([$[W1]_{XO-}$ $[W

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.21-24
• /
• 2010

The effects of mole ratio(A/B) m and Ti-ion on the dielectric properties and microstructure of the microwave dielectric ceramics $(Ca_{0.7}Sr_{0.3})_m(Ti_yZr_{1-y})O_3$ were investigated. Ti ions substituted on Zr-sites in these modified $CaZrO_3$ composition strongly affect the sintering density and microstructure of the fired ceramic body. With increasing the amount of Ti substituted on Zr-sites, the sintered density rapidly increased and the dense microstructure was obtained for the compositions having mole ratio of 1.01, whereas the sintered density and microstructure are nearly constant with the content of Ti-ion for the compositions having mole ratio of 0.99. With increasing the content of Ti ion, the curve of TCC (Temperature Coefficient of Capacitance) as a function of temperature rotated clockwise and satisfied the COG characteristics for both of compositions with mole ratio of 0.99 and 1.01. The content of Ti ion seems to be more effective than mole with respect to the controlling of firing and TCC.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.517-531
• /
• 1999

This paper presents the development of the 2-mode variable gain high power amplifier for a transmitter of INMARSAT-M operating at L-band(1626.5-1646.5 MHz). This SSPA(Solid State Power Amplifier) is amplified 42 dBm in high power mode and 36 dBm in low power mode for INMARSAT-M. The allowable error sets +1 dBm of an upper limit and -2 dBm of a lower limit, respectively. To simplify the fabrication process, the whole system is designed by two parts composed of a driving amplifier and a high power amplifier, The HP's MGA-64135 and Motorola's MRF-6401 are used for driving amplifier, and the ERICSSON's PTE-10114 and PTF-10021 are used the high power amplifier. The SSPA was fabricated by the circuits of RF, temperature compensation and 2-mode gain control circuit in aluminum housing. The gain control method was proposed by controlling the voltage for the 2-mode. In addition, It has been experimentally verified that the gain is controlled for single tone signal as well as two tone signals. The realized SSPA has 42 dB and 36 dB for small signal gain within 20 MHz bandwidth, and the VSWR of input and output port is less than 1.5:1 The minimum value of the 1 dB compression point gets 5 dBm for 2-mode variable gain high power amplifier. A typical two tone intermodulation point has 32.5 dBc maximum which is single carrier backed off 3 dB from 1 dB compression point. The maximum output power of 43 dBm was achieved at the 1636.5 MHz. These results reveal a high power of 20 Watt, which was the design target.the design target.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.969-972
• /
• 2015

Many studies have been carried out in order to develop a frequency efficient communication system than the current communication system for satisfying the increasing demands of wireless data services in mobile communication systems. If a communication system dramatically improving the frequency utilization efficiency is not developed, service providers must maintain more number of base station equipments to meet the increasing demands of wireless data service. Service provider needs a system or method to reduce maintenance costs. Demands of wireless data service are changed according to time of day, location and so on. Power consumption can be reduced if the supplied power of communication systems is controlled by wireless data traffics. This paper describes the design and implementation of power management system of mobile communication base station's equipment based on smart grid. The proposed power management system controls the supplied power to the mobile communication infrastructures depending on the demand of wireless data. Field test results of the implemented system show the proposed system saves 26% of the power consumption in the base stations.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.21-26
• /
• 2007

The Protocol adopted in Sep. 1997 included the new Annex VI of MARPOL 73/78, which entered into force on 19 May 2005. Revision for the accept MARPOL Annex VI with make public on 29 Dec. 2005 and enforce on 29 Jun. 2006. For all that not installation at oil terminal or if installed do not used. The purpose of this study is to research and evaluate the methods of sampling and analysis, and the pollution measure of existed VOCs during the bulk liquid cargo operation at vessels. As the sampling instrument of VOCs, Tedlar bag has the effect of decrease in concentration by the chemical reaction and absorption, and the method using the solvent extraction has error cause because of the extraction, the absorption tube has error by the breakthrough. But canister is the best sampling instrument because of having no sampling mistake. The study on VOCs emission is not sufficient for the research on the pollution cause and the analysis data on the HAP during the bulk liquid cargo operation at vessels. Hence, monitoring on the management hazardous VOCs need to be continued during the cargo operation at vessels and VOCs management field must be study for the make progress at a good pace for reason of crew's health.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.412-417
• /
• 2015

The IMO MEPC has been increasingly strengthening the emission standard for marine environment protection. In particular, nitrogen oxide (NOx) emissions of all ocean-going ships built from 2016 will be required to comply with the Tier-III regulation. In this study, a vanadia based SCR (Selective Catalytic Reduction) system developed for ship application was installed on a diesel engine for power generation of the training ship T/S SAENURI in Mokpo National Maritime University. For the present study, the exhaust pipeline of the generator diesel engine was modified to fit the urea SCR system. This study investigated the NOx reduction performance according to the two kind of injection method of urea solution (40%): Auto mode through the PLC (Programable Logic Control) and Manual mode. We were able to find the ammonia slip conditions when in manual mode method. So, the optimal urea injection quantity can be controlled at each engine load (25, 35, 50%) condition. It was achieved 80% reduction on nitrogen oxide. Furthermore, we found that the NOx reduction performance was better with the load up-down (while down to 25% from 50%) than the load down-up (while up to 50% from 25%) test.

• Korean Journal of Optics and Photonics
• /
• v.24 no.5
• /
• pp.231-236
• /
• 2013

We investigated the optical design of a smart headlamp capable of producing various beam patterns through only on/off modulation of light sources. This was implemented by forming a continuous matrix of beams from discontinuous beam patterns by means of a multi-array LED optical system. As one such optical system, the multi-array LED system is a convenient and economical device for implementing beam patterns with the simple on/off modulation of the light sources. A single optical assembly module can be made by combining a multiple-LED array, optical system module, and electronic control with no need for any additional mechanical components. The present optical system was designed to include a secondary lens and a projection lens mounted at the front of each LED in the array to realize accurate lighting patterns as well as the required luminosity at a distance of 25 m in the forward direction. Finally, we identified and analyzed the patterns implemented by the designed optical system that produced satisfactory performance of high beams and adaptive driving beams (ADB).

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.5
• /
• pp.107-116
• /
• 2011

In this paper, a traffic adaptive sleep based medium access control (TAS-MAC) protocol for wireless sensor networks (WSNs) is proposed. The protocol aims for WSNs which consist of clustered sensor nodes and is based on TDMA-like schema. It is a typical schedule based mechanism which is adopted in previous protocols such as LEACH and Bit-Map Assisted MAC. The proposed MAC, however, considers unexpected long silent period in which sensor nodes have no data input and events do not happen in monitoring environment. With the simple traffic measurement, the TAS-MAC eliminates scheduling phases consuming energy in previous centralized approaches. A frame structure of the protocol includes three periods, investigation (I), transmission (T), and sleep-period (S). Through the I-period, TAS-MAC aggregates current traffic information from each end node and dynamically decide the length of sleep period to avoid energy waste in long silent period. In spite of the energy efficiency of this approach, the delay of data might increase. Thus, we propose an advanced version of TAS-MAC as well, each node in cluster sends one or more data packets to cluster head during the T-period of a frame. Through simulation, the performance in terms of energy consumption and transmission delay is evaluated. By comparing to BMA-MAC, the results indicate the proposed protocol is more energy efficient with tolerable expense in latency, especially in variable traffic situation.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.193-200
• /
• 2015

In this paper, we propose the radiation measuring algorithm and the device composition using CMOS image sensor. The radiation measuring algorithm using CMOS image sensor is based on the radiation particle distinguishing algorithm projected to the CMOS image sensor and accumulated and average number of pixels of the radiation particles projected to dozens of images per second with CMOS image sensor. The radiation particle distinguishing algorithm projected to the CMOS image sensor measures the radiation particle images by dividing them into R, G and B and adjusting the threshold value that distinguishes light intensity and background from the particle of each image. The radiation measuring algorithm measures radiation with accumulated and average number of radiation particles projected to dozens of images per second with CMOS image sensor according to the preset cycle. The hardware devices to verify the suggested algorithm consists of CMOS image sensor and image signal processor part, control part, power circuit part and display part. The test result of radiation measurement using the suggested CMOS image sensor is as follows. First, using the low-cost CMOS image sensor to measure radiation particles generated similar characteristics to that from measurement with expensive GM Tube. Second, using the low-cost CMOS image sensor to measure radiation presented largely similar characteristics to the linear characteristics of expensive GM Tube.

• Clean Technology
• /
• v.22 no.2
• /
• pp.96-105
• /
• 2016

VOCs emissions from industries cause the air pollution and odor. In the industrial facilities, the existing odor treatment techniques have limits and problems. In this study, the optimum essential oil and metal oxide selected by screening test. lavender oil, cypress oil and TiO₂ were determined by deodorant materials and those were blended by 5%, 45%, 10%, respectively. In addition, the result of batch type experiments depending on the dilution rate, injection, rate, temperature showed that the optimum condition of deodorant is 6 mL of injection rate, and 200 times of dilution rate and the removal efficiency increased in proportion with temperature. In addition, the activation energy was calculated from the rate equation, which appeared in the 3-4 times lower than conventional deodorants.