• Title/Summary/Keyword: 호광

Search Result 20, Processing Time 0.029 seconds

손상 핵연료의 온도 및 산소대 금속 비율의 변화 모형 연구

  • 서영하;박광헌;호광일
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05c
    • /
    • pp.329-334
    • /
    • 1996
  • 손상 핵연료의 온도 및 산소대 금속 비율의 변화모형을 연구하였다. 열역학적 분석과 산화과정에 대한 분석을 통해 손상핵연료에서의 핵연료 온도와 핵연료내 O/U값 변화를 기술함으로써 결함발생에 의한 핵연료내 냉각수 침투는 Gap conductance를 떨어뜨리고 소결체 산화에 따른 O/U값 증가로 열전달특성의 저하를 가져와 핵연료의 온도를 상승시킨다는 결과를 얻어냈다.

  • PDF

고온 크립현상에 응용되는 연속체 대미지 이론의 발전

  • 호광일
    • Journal of the KSME
    • /
    • v.30 no.3
    • /
    • pp.252-257
    • /
    • 1990
  • 크립대미지이론의 발전을 처음 제시된 단순인장시의 등방성이론으로부터 최근에 제시된 다축응 력상태의 이방성이론에 이르기까지 고찰하여 보았다. 한편 미국과 일본 등지에서의 최근의 연 구방향은 이러한 이론의 응용성과 합리성을 찾기 위하여 다각적인 실험을 진행중이며 보다 정 확하고 완벽한 기계 및 금속공학적인 측면에서의 이론전개에 관심과 노력을 집중하는 추세에 있다.

  • PDF

RI를 이용한 도로성토계기의 측정신뢰구간 예측 I

  • 전태훈;이석근;황주호;호광일;권정광;전홍배;양세학
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1996.05d
    • /
    • pp.147-154
    • /
    • 1996
  • 외국에서는 도로건설시 성토관리용으로 '방사성동위원소(Radioisotope : 이하 RI)를 이용한 습윤밀도 및 함수량 측정장비'가 많이 사용되고 있는 추세이다. 국내에서는 1989년 제정된 건설 기술관리법 감리전문회사건립 등록기준에 밀도\ulcorner함수량 측정기의 보유가 명시되어 있고 시공성 향상 차원에서 도입될 예정이다. 그러나 국내의 토양에 맞게 제작되어지지 않았고 사용상의 방사선 관련 제약 때문에 기대만큼 실제 사용이 되지 않고 있다.$^{(1)}$ 연구발표내용은 국내에서 제작, 실험하여 만들 RI계기개발의 기초가 되는 내용이며, 만들어질 계기의 부품과 계산과정 등을 예측하는 것이다.

  • PDF

Studies on Direct Sowing-Dry Paddy Rice Culture in the Middle Part of Korea (중부지방에 있어서의 수도건답직파재배 기술체계확립에 관한 시험연구)

  • Jai-Hyoun Lee
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.7 no.1
    • /
    • pp.1-29
    • /
    • 1969
  • Experiments on rice concerning it s varieties, fertilization, seedling dates and herbicides have been conducted to determine the most desirable method of direct sowing cultivation on dry paddy field land in the middle part of Korea. The results obtained at the Office of Rural Development of Choongnam Province are as follows:. 1. Sixteen different derivatives from the main varieties of low land rice were cultivated on a dry paddy field by the direct sowing method; at the same time, a few varieties were tried adopting the common transplanting cultivation method. The yield and yield factors from these two groups were examined to give the following results: a) Compared to the common transplanting cultivation, the direct sowing method showed remarkably increased number of panicles while the number of flowers per panicle was shown to be significantly decreased. The maturing ratio was detected to be lowered. The yield horn them differed according to the different varieties : good yield was obtained from Hokwang while Norin #25 proved poor when compared with the common transplanting cultivation method. b) Among sixteen varieties tested, Sunsou, Norin #25, Jaigou, Hokwang, Palkueng and Gosi showed comparatively high yields, their yield being more than 325 kilograms per 10 Are, but Nampoong, Paldal, Nongkwang, Norin #29, Eunbangju #101 and Shiro gane showed less yield, their yield being less than 271 kilograms per 10 Are, the relations between the yield and the yield factors can be summarized as follows; Number of varieties and their rice yield. 1) The varieties which were great in the, number of panicles and high in yield=Jaigoun, Hokwang Palkueng and Gosi. 2) The varieties which were low in the number of panicles and high in yield=Sounsou and Norin #25. 3) The varieties which were great in the number of panicles and poor in yield=Eunbangju #101 and Sirogane. 4) The varieties which were poor in the number of panicles and poor in yield: Nampung, Paldal and Norin #29. Number of flowers per panicle and yield. 1) The varieties which were great in the number of flowers per panicle and high in yield: Sounsou, Norin #25 and Gosi. 2) The varieties which were poor in the number of flowers per panicle and high in yield ; Jaigoun, Hokwang and Palkueng. 3) The varieties which were great in the number of flowers per panicle and poor in yield: Paldal and Nampung. 4) The varieties which were poor in the number of flowers per panicle and poor in yield: Norin #29. Eunbangju #101 and Sirogane. Maturing ratio and yield. 1) The varieties which were high in the maturing ratio and high in yield: Jaigoun, Sounsou, Norin #25 and Palkueng. 2) The varieties which were low in the maturing ratio and high in yield: Hokwang and Gosi. 3) The varieties which were early maturing rat io and low in yield: Hokwang and Gosi. 4) The varieties which were late maturing ratio and poor in yield: Eunbangju #101, Nampungand Sirogane 1, 000 grain weight and yield. 1) The varieties which were heavy in 1, 000 grains weight and high in yield=Norin #25 and Hokwang. 2) The varieties which were light in 1, 000 grains weight and high in yield=Sounsou and Jaigoun. 3) The varieties which were heavy in 1, 000 grains weight and poor in yield=Nongkwang and Eunbanju. 4) The varieties which were light in 1, 000 grains weight and poor in yield=Norin #29 and Sirogane. 2. The experiment on fertilization showed that the most desirable amount to be given per 10 Are was 10 kilograms of Nitrogen, 5 kilograms of phosphate and 6 kilograms of potassium; and when the Nitrogen given exceeded 8 kilograms, its effect was better when given in amsll consecutive (split) amounts, while the maturing ratio and the number of the flowers per panicle increased when Nitrogen was given in large amount during the later stage of growth of rice. 3. The experiment on the date and amount of seedling showed that the tested variety, Sunsou gave the best results when planted on the days between 25 April and 10 May. Eight liters per 10 Are were preferable if planted early and 12 liters per 10 Are if planted late. The reason why the later planting gave a lower yield was that the number of flowers per panicle was fewer. 4. The experiment on the irrigation for rice with direct sowing cultivation immersed in water showed that it was the most satisfactory when irrigated on 25th June, 55 days after its seedling, its plot giving the best yield. The plots 10th June and 15th July showed just as good results. However, irrigated later, than 15th July it showed lower yields. 5. Compared to the yield of the plot controlled by the common method, the yield from the plots treated with chemical herbicide such as LOROX, TOK, PCP, SWEP, Mo-338 on dry condition soil seemed poorer, but significant difference was not found statistically. On the other hand in the case where chemical herbicides such as TOK, Mo-338, Stam F-34 or ORDRAM were used after irrigation, the yield from the ORDRAM and TOK treated plots did not show significant differences compared to the common hand weed controling method, but those treated with chemicals other than the above showed a lower yield.

  • PDF

A study on the sheet bending by the plastic deformation of flange (플랜지부의 소성변형에 의한 박판의 굽힘가공에 관한 연구)

  • Ho, Kwang-Il;Chang, Yoon-Sang
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.21 no.7
    • /
    • pp.1050-1057
    • /
    • 1997
  • The sheet bending with large radius of curvature is analyzed with both theoretical and experimental methods. Sheet bending in elastic limit is accomplished by the plastic deformation of flange. The springback model is developed theoretically and the effects of the factors are evaluated. The prediction accuracy of the model is also evaluated by comparing with the experimental data. Finally, an algorithm to design the sheet-bending die is suggested for usage in industry.

Computation of Spring Constants of MEMS Socket Pins by Theoretical Analysis (이론분석에 의한 MEMS 소켓 핀의 스프링 상수 계산)

  • Bae, Kyoo-Sik;Ho, Kwang-Il
    • Korean Journal of Materials Research
    • /
    • v.18 no.11
    • /
    • pp.592-596
    • /
    • 2008
  • Spring constants (displacement per unit applied load) of MEMS socket pins of given structures were computed by theoretical analysis and confirmed by the finite element method (FEM). In the theoretical analysis, the displacement of pins was calculated based on the 2-dimensional bending theory of the curved beam. For the 3-dimensional modeling, CATIA was used. After modeling, the raw data were transferred to ANSYS, which was employed in the 3-dimensional analysis for the calculation of the stress and strain and loaddisplacement The theoretical analysis and the FEM results were found to agree, with each showing the spring constants as 63.4 N/m within a reasonable load range. These results show that spring constants can be easily obtained through theoretical calculation without resorting to experiments and FEM analysis for simple and symmetric structures. For the some change of shape and structural stiffness, this theoretical analysis can be applied to MEMS socket pins.