• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.2
• /
• pp.141-157
• /
• 2012

For the application TBM tunneling method, Both tunnel design standard and case study designed & constructed in domestic and foreign have been conducted. According to the study, the number of lane and inner shape (single or duplex) vary depending on the volume of traffic. Also extra space located in the top and bottom of tunnel is used for a multipurpose such as ventilation, disaster prevention, maintenance and administration. To find area ratio according to the components of road TBM tunnel, a standard section was considered as a two-lane road. Then, the analysis of area ratio of this section which consists of components for clearance, extra space in upper and lower tunnel was carried on two widths of shoulder. In addition, after a structural analysis, a thickness requirement of lower slab which is essential for road tunnel was derived on a few supporting types. Through correlation analysis, the ranges of available cross-sectional area between slab thickness and lower extra space of the tunnel was presented.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.477-483
• /
• 2022

A flight simulator is a device that allows pilots attain proficiency of various situations and a sense of flight, and as interest in scientific training increases in modern aviation, aviation training organization develop and operate simulators. Therefore, in this study, the process of developing a motion-based helicopter simulation Training Device using a commercial program. Citing previous studies, the specificity of helicopter flight education and the positive effect of motion simulators were confirmed. In addition, the design and program of the motion device were studied in the process of checking the configuration and current regulations of flight simulation training devices and developing a helicopter motion simulator. A motion program was set based on the system design and structural design of the flight simulator, and data received from the flight simulator was identified to confirm the expected operating shape. Through this study, we intend to create a positive expected effect on pilot training by completing a motion-based helicopter simulator.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.1
• /
• pp.141-152
• /
• 2007

Considering uncertainties of random input data, it is more reasonable to use probabilistic method than the conventional deterministic method for the design of structures or for the assessment of the responses of structures, which are designed as safe even under extreme loads. Therefore, to assess the quantitative effects of the constructed cable stayed bridge by the input random variables, a sensitivity analysis is studied. Using perturbation method, an analysis program is developed for the iterative probabilistic finite element analyses and sensitivity analyses of the cable stayed bridge, except the initial shape analysis. Monte-Carlo Simulations were used for the verification of the developed program. The results of sensitivity analysis shows the governing effects of external loads. Because the results also provide the sensitive effects of the stiffness of members and the magnitudes of prestressing force of cables, the developed

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.218-226
• /
• 2020

An experimental study was conducted on baseline model updating and damage estimation techniques for the health monitoring of offshore wind turbine tripod substructures. First, a procedure for substructure health monitoring was proposed. An initial baseline model for a scaled model of a tripod substructure was established. A baseline model was updated based on the natural frequencies and the mode shapes measured in the healthy state. A training pattern was then generated using the updated baseline model, and the damage was estimated by inputting the modal parameters measured in the damaged state into the trained neural network. The baseline model could be updated reasonably using the effective fixity model. The damage tests were performed, and the damage locations could be estimated reasonably. In addition, the estimated damage severity also increased as the actual damage severity increased. On the other hand, when the damage severity was relatively small, the corresponding damage location was detected, but it was more difficult to identify than the other cases. Further studies on small damage estimation and stiffness reduction quantification will be needed before the presented method can be used effectively for the health monitoring of tripod substructures.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.425-429
• /
• 2006

본 연구는 VGIS(Virtual Geographic Information System)을 이용, 환경친화적인 도로건설을 위해 실제 좌표를 사용하므로 3차원 도로의 선형과 구조물을 설계하였다. 그리고 시공 중에 발생 할 수 있는 민원문제 및 설계변경 시 효율적인 의사결정 할 수 있도록 하였다. 대상지역은 전라남도 장흥군의 최대 역점사업인 관광을 테마로 한 정남진 가는 길을 컨셉으로 한 '가고 싶은 길', '보고싶은 다리', 기억하고픈 터널'을 주제로 설계하였으며 명실공히 남도의 새로운 관광명소가 될 자연관광도로가 될 것으로 기대된다. 기존의 3차원 설계에서는 평면적인 선형과 구조물의 형상을 이해하는데 상당한 시간이 소요되었지만, 구조물을 3차원으로 설계함으로써, 비전문가라도 구조물을 쉽게 파악 할 수 있었다. 그리고 3차원 설계는 기존 구조물과 신설될 구조물 사이에 공사 중 발생할 수 있는 환경 및 민원문제를 사전에 파악할 수 있었다. 또한, 실제와 같이 구현된 도로와 구조물의 시뮬레이션을 통하여 기존의 각종 의사 결정에 있어 보다 시각적 효과를 증진시켜 효율적인 의사결정을 가능하게 하였다. 본 연구에서는 실제 평면 설계에 쓰이는 좌표값을 3차원설계에 적용하였다. 도로 노선 및 경관분석에 많은 도움이 될 것으로 보이며 VGIS를 이용하므로 도시계획, 식물, 토양. 수로 또는 도로형태, 홍수계획 등 많은 일들이 평가에 사용된다. 여기서는 구조물 3차원 설계에 관한 기초적인 연구를 시행하였으며, 3차원설계를 통해 의사결정시 효율적인 판단을 할 수 있었고, 환경 친화적 시공 및 설계에 대한 연구가 이루어져야 될 것으로 판단된다.안전관리를 위해 채석장에 안전표지판을 설치하여야 하며, 실내가공 작업장의 자동이동시스템을 작업별로 채색하여 식별을 용이하게 하여야 하겠다. 또한 이 연구 결과를 영세사업장의 산업간호프로그램인 'Clean 3D'사업에서 적용하여 우리나라 채석사업장 근로자 건강관리를 발전시켜야 하겠다. 확장기 혈압에서 RZS와 DAD의 일치도와 평균을 중심으로 더 넓게 퍼져있어 낮은 일치도를 보였으며 또 DAD와 RMS의 혈압치는 숫자 선호도를 볼 수 있는데 특히 RMS는 더 뚜렷하게 나타났는데 확장기 혈압의 최빈치(30.6)는 100mmHg이었다. 혈압치들이 가장 가까이 "0"점으로 치우쳐져 있었다. RZS의 Central tendency는 DAD와 RMS보다 뚜렷하였다. 결론적으로 RZS는 이 연구목적으로 가장 적절함을 보여준다.청소년들의 학교급식에 대한 만족도를 높이기 위해서 다음과 같은 제언을 하고자 한다. 먼저, 학교급식에 대한 식단 작성 시 학생들이 학교에서 제공되기 원하는 식단에 대한 의견을 받고 그 의견에 대한 결과를 게시하여 학생들이 제공되기 원하는 식단을 급식 시 제공하여 학생들이 식단선택에 동참할 수 있는 기회를 주는 것이 바람직하겠다. 또한 영양사는 학급의 반대표와의 정기적인 모임을 가짐으로서 학생들의 불만사항 및 개선 요구사항에대해 서로 의견을 교환하여 설문지조사가 아닌 직접적인 대화를 하여 문제점을 파악하고자 하는 적극적인 자세가 필요하겠다. 특히 아침식사의 결식 빈도가 높았고 이는 급식성과에 부정적인 영향을 줄 뿐 아니라 학교에서 제공하는 음식의 섭취정도에도 영향을 주고 있으므로 학생들에게 학부모와 전담교사 및 학교영양사는 학생들

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.638-644
• /
• 2020

This study examines cracks that occur under the load of an aircraft. The life of aircraft vulnerability structures was analyzed and structural fitting improvements were made. Structural integrity and safety have been achieved through preemptive life expectancy and life management of aircraft structures. The crack size inspection capability of the aircraft under analysis is 0.03inch, compared with 0.032inch, which is the lowest of the three vulnerable parts. In addition, the fatigue life analysis results in approximately 1450 operating hours, the lowest of the three vulnerable parts relative to the aircraft's required life of more than 15000 operating hours, which increased the repeat count of the aircraft's initial and re-inspection times, and hence raised the resulting costs and manpower consumption. Finally, the features were improved through structural fitting of the identified three weak parts. The lowest critical crack size was secured at 0.13 through increased structural resistance to generated cracks and increased aircraft safety. The lowest structural fatigue life for cracks occurring during aircraft operation is 25000 operating hours, which are analyzed above the required structural life, resulting in more optimized improvements than the repair costs and excessive fitting range caused by cracks and fractures.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2006.05a
• /
• pp.146-151
• /
• 2006

현재 국가지리정보유통망을 통해 유통되고 있는 수치지도(Digital map)는 대부분 항공 측량사진(Air survey Photographs)이나 위성영상(Satellite images)을 통해 취득된 토지 피복의 형상을 기반으로 제작된 지도들이다. 정사사진으로부터 취득된 지형정보를 기호화, 단순화한 수치지도는 실제 사물의 형태와 많은 차이가 있어 지형과 시설물의 변이를 사실대로 반영하지 못한다. 특히 최근 들어 지하시설물이나 건축기술의 발달로 층별 구조가 다양해진 건축물의 형태 등은 정사사진으로는 식별이 불가능하고 건물의 경우 지붕의 형태로 묘사되는 등 표현에 한계가 있다. 도심지역을 대상으로 제작된 1/1,000수치지형도나 일부 지자체나 공공기관 등에서 제작된 $1/500{\sim}1/2,500$ 수치지형도는 상세한 지형정보를 포함하고 있는 높은 정밀도의 수치지도이지만, 도시지역의 변이가 빠르게 일어나고 있기 때문에 자료 신뢰성과 최신성을 유지하는데 한계가 있다. 따라서 본 연구는 현지조사나 측량에 의존하고 있는 정사사진으로부터 취득이 불가능한 지형자료의 취득이나 수년단위인 갱신주기의 한계를 극복하고 실시간으로 수치지도를 수정갱신 할 수 있는 대안으로 일반측량성과도의 활용방안을 제시하고자 한다. 일반측량업에서 생산되는 일반측량성과도는 임시 도근점에 의해 측량을 실시하고 지적경계점과 현황기지점을 도해법에 의해 지적도와 중첩시켜 제작한 측량도로서, 일반측량 성과도에 절대좌표체계를 부여하고 수치지도와 매칭 기법을 제시함으로서 경제적이고 신속한 실시간 수치지도 수정갱신체계를 확립할 수 있고, 자료의 공유함으로써 중복측량을 방지할 수 있다.보 등)를 활용, 구축된다. 교통분석용 네트워크는 구축시점에 따라 현재 및 장래 네트워크로 구분되며 장래 네트워크는 기준년도부터 2031년까지 5년 단위로 계획된 장래도로를 반영하여 구축된다. 교통주제도 및 교통분석용 네트워크는 국가교통DB구축사업을 통해 구축된 자료로서 교통체계효율화법 제9조의4에 따라 공공기관이 교통정책 및 계획수립 등에 활용할 수 있도록 제공하고 있다. 건설교통부의 승인절차를 거쳐 제공하며 활용 후에는 갱신자료 및 활용결과를 통보하는 과정을 거치도록 되어있다. 교통주제도는 국가의 교통정책결정과 관련분야의 기초자료로서 다양하게 활용되고 있으며, 특히 ITS 노드/링크 기본지도로 활용되는 등 교통 분야의 중요한 지리정보로서 구축되고 있다..20{\pm}0.37L$, 72시간에 $1.33{\pm}0.33L$로 유의한 차이를 보였으므로(F=6.153, P=0.004), 술 후 폐환기능 회복에 효과가 있다. 4) 실험군과 대조군의 수술 후 노력성 폐활량은 수술 후 72시간에서 실험군이 $1.90{\pm}0.61L$, 대조군이 $1.51{\pm}0.38L$로 유의한 차이를 보였다(t=2.620, P=0.013). 5) 실험군과 대조군의 수술 후 일초 노력성 호기량은 수술 후 24시간에서 $1.33{\pm}0.56L,\;1.00{\ge}0.28L$로 유의한 차이를 보였고(t=2.530, P=0.017), 술 후 72시간에서 $1.72{\pm}0.65L,\;1.33{\pm}0.3L$로 유의한 차이를 보였다(t=2.540, P=0.016). 6) 대상자의

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.38-47
• /
• 2005

Compression, lateral, and opposite woods in a branch of Pinus parviflora S. et Z. were described and compared in the qualitative anatomical aspects through light and scanning electron microscopy. Tracheid transition from earlywood to latewood in the compression wood appeared to be relatively more gradual than in the opposite or lateral wood. Growth ring width and proportion of latewood were thought to be greater in the compression wood than in the lateral or opposite wood. The latewood tracheids of compression wood in transverse surface were mostly round, differently from those of lateral and opposite woods with square to angular shapes. Also, intercellular spaces, helical cavities and checks, and slit-like pit apertures were observed only in the compression wood tracheids. Cross-field pitting in the compression wood appeared not to be used as diagnostic guide because of their severe alteration from normal fenestriform or window-like type to cupressoid to taxodioid types. In tangential surface, fusiform rays in the compression wood were wider but lower than those in the lateral wood or opposite wood. In conclusion, compression wood was different from lateral and opposite woods but lateral and opposite woods were almost identical in qualitative anatomical features.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.331-337
• /
• 2021

Owing to the limited development period and budget of the weapon system, many problems have arisen in the operation stage after mass production. Therefore, engineering changes are also increasing. On the other hand, an analysis of the cause of problems and improvement of the system equipment performed in engineering changes cannot be managed synthetically. Hence, important actual data can only be used once. In particular, unlike hardware where the shape of the equipment is changed or the part number is changed, the contents of software engineering changes are only partially included in the proposal. Moreover, only the extent to which the version of the source package and the executable file has been changed can be identified. Therefore, this paper proposes a method to build and utilize a database for cause analysis and improvement plan data of weapon-system software engineering changes and software technical support. The above utilization measure can contribute to the quality assurance of weapon-system software developed in the future by preemptively applying real-world data when developing similar weapon systems.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.425-433
• /
• 2019

In this paper, the RCS analysis of the 10m unmanned surface vehicles was performed, and the factors of RCS increase were analyzed. Modeling techniques by transforming a geometric shape can reduce the RCS area, which can be used to develop stealth unmanned surface vehicles. In order to reduce the RCS, the existing Top Mast part was moved 1m to the tail part, the 5 degree tilt angle was moved below 0.5 m, and additional guided walls were installed to minimize the influence on the center and surrounding corner reflecting structures. As a result of comparing and analyzing the RCS analysis value with the existing model, it can be seen that the reduced countermeasure model is -3.79 dB lower than the existing model for all elevations. In particular, it can be seen that the strong scattering phenomenon is substantially removed in the region except the sacrificial angle region. In addition, it can be seen that in the case of -5m to 2m where the guide wall is added, the reflected signal is improved up to 20 to 40 dB or more, so that it does not appear on the 2D ISAR image. RCS analysis of unmanned surface vehicles explained the process of analyzing and identifying problem location through distance profile analysis and ISAR image analysis.