• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.557-563
• /
• 2009

This study is on the properties of inorganic porous calcium silicate material made from silica powder through the autoclaving curing, the results of this study should be utilized fundamental data for the development of noise reduction porous solid material using siliceous byproduct generated by various manufacture process. For the manufacture of autoclave curing specimen, various calcareous materials used and siliceous materials used silica powder. In this study, properties in density and compressive strength according to the change of W/B and C/S ratio, microscopy for the shape of pore, SEM and XRD for the examination of hydrate after autoclave curing are carried out respectively. The test results shown that the more slurry density decrease, the more W/B increase at the fresh state, this tendency shown similar to in hardened state. Among the specimens of C/S ratio, the compressive strength of C/S ratio of 0.85 gave the highest the compressive strength. In the results of XRD, tobermorite generated by autoclaving curing was created all of specimens regardless of C/S ratio. To ascertain pore structure, we compared with existing porous calcium silicate product(ALC, organic sound absorbing porous material). The results of microscope observation, pore structure of specimen of this study was similar to that of existing inorganic sound absorbing foam concrete. therefore, we could conformed a possibility of sound absorbing porous solid material on the basis of the results.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.466-472
• /
• 2008

Purple Gold is the alloy consisting of 78wt%Au-22wt%Al, and is expressed as a chemical formula, $AuAl_2$. Lately it is being used for the material of accessories or the decorative ornaments, being one of the colored golds having the peculiar purple color, like White Gold and Pink Gold. Purple Gold has the weak point in shaping through casting process due to the bad malleability and castability, being the intermetalic compound of Au and Al. Therefore, it is possible to produce the final product only by the cutting and the grinding process or to use it as a decorative coat with the thin film evaporation. This study implemented two kinds of thin film experiments. One is the case that heat treatment was made after Au and Al deposition evaporated separately with a weight ratio 78:22 on the 200nm$SiO_2$/Si substrate. The other is the case that the surface deposition was made through the vacuum evaporation, keeping the glass substrate temperature remain room temperature, using the bulk $AuAl_2$ as a source. The final film property was measured, focusing on the Purple Gold's color and thickness through the bare eye inspection, the microstructure analysis, the surface resistance analysis, the color difference analysis, and XRD analysis. Purple Gold was not formed, as the excessive surface agglomeration occurred, in case of being produced and treated thermally with 12.5nmAu/40nmAl/200nm$SiO_2$/Si structure. Our results suggest that of Purple Gold films, showing the same purple color as the bulk's, were successfully deposited with the direct thermal evaporation from the $AuAl_2$ bulk source.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.331-339
• /
• 2013

LiDAR has been one of the widely used and important technologies for 3D modeling of ground surface and objects because of its ability to provide dense and accurate range measurement. The objective of this research is to develop a method for automatic detection and modeling of railroad power lines using high density LiDAR data and RANSAC algorithms. For detecting railroad power lines, multi-echoes properties of laser data and shape knowledge of railroad power lines were employed. Cuboid analysis for detecting seed line segments, tracking lines, connecting and labeling are the main processes. For modeling railroad power lines, iterative RANSAC and least square adjustment were carried out to estimate the lines parameters. The validation of the result is very challenging due to the difficulties in determining the actual references on the ground surface. Standard deviations of 8cm and 5cm for x-y and z coordinates, respectively are satisfactory outcomes. In case of completeness, the result of visual inspection shows that all the lines are detected and modeled well as compare with the original point clouds. The overall processes are fully automated and the methods manage any state of railroad wires efficiently.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.474-493
• /
• 1999

According to repeated measurements and correction procedures, the accuracy of the phase-shifting profilometry was developed. At first, after 20 final models for maxillary complete denture were duplicated , the mucosa sur-faces of models were measured with the phase-shifting proflometry and each mirror view of these was calibrated. Maxillary casts were divided into 4 groups of 5 casts per each, and wax dentures with 2 sheets of baseplate wax and artificial teeth were made and then cured according to the curing method of each group. Group I ; quick curing with QC-20 acrylic resin Group II ; 9 hour curing with QC-20 acrylic resin Group III ; SR-Ivocap system Group IV ; metal base and quick curing with QC-20 acrylic resin. After curing, polishing, and storing at $37^{\circ}C$ in saline for 30 days, the forms of the impression surface of the dentures were measured with the phase-shifting profilometry. Then, the impression surface form of each denture was placed in the optimal position of com-parison with the mirror view of the same final cast. The amount and direction of distortion of each denture was analyzed and the effects of polishing and storage in each denture were compared, The obtained results were as follows : 1. In Group I, the denture was observed as the appearance distorted in the opposite direction of the mucosa and the postero-lateral part of palatal portion of the denture was observed as the appearance separated from the mucosa. Also, the buccal flanges of the denture were observed as the appearance distorted in the direction of the mucosa. 2. In Group II, the postero-lateral part of palatal portion of the denture was observed as the appearance separated slightly from the mucosa. The bilateral buccal flanges of denture were observed as the appearance distorted severely in the direction of the mucosa. 3. In Group III the bilateral part of the residual ridge crest portions and the buccal flanges of the denture were observed as the appearance distorted in the direction of the mucosa, and specially, the buccal flanges of the maxillary tuberosities were distorted severely. 4. In Group IV, the acrylic resin base of the buccal portion of the denture was observed as the appearance distorted in the opposite direction of the mucosa. 5. The phase-shifting profilometry, done with repeated measurements and correction procedures, was effective in comparing the amount and direction of distortion at every position after the laboratory work and the delivery of maxillary complete denture.

• Journal of Music and Human Behavior
• /
• v.12 no.2
• /
• pp.19-36
• /
• 2015

The purpose of this study was to examine the effects of rhythmic auditory stimulation (RAS) on gait parameters, with and without the presence of a melody, for adolescents with traumatic brain injury (TBI). Three adolescents with TBI received a total of ten individual RAS training sessions. At pre and posttest, spatiotemporal parameters including cadence, velocity and kinematic parameters were measured using the VICON 370 Motion Analysis System. The results showed no significant difference in gait velocity between the two conditions, thus the presence of the melody condition did not impact the outcome of RAS gait training. On the other hand, all participants showed improvement in gait function after RAS training. The cadence, velocity, stride length, and symmetry were increased and the stride time was reduced after training. The motion analysis demonstrated that the movement patterns of hip and knee joints improved, as they were more similar to normal gait, which indicates that the walkings tance became more stable. The research findings indicate that rhythm is the primary factor in mediating gait functions via RAS training. This study also supports that RAS training can effectively improve the gait function for adolescents with TBI.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.685-690
• /
• 2001

This study was conducted to evaluate the quality of the commercial boiled-dried anchovies processed in Japan by determining chemical components and sensory evaluation. The moisture, salinity and acid-insoluble ash contents of the imported boiled-dried anchovies ranged $22.2\sim24.7\%,\;5.7\sim6.6\%\;and\;0.42\sim0.50\%$, respectively. By sensory evaluation, the imported boiled-dried anchovy was less than $5\%$ in breakage, whitish of yellowish in color and no foul smell in odor. Judging from the above results by Korean standard, the imported boiled-dried anchovy was classified into special grade. No difference in total amino acid and a major mineral contents were found between commercial boiled-dried anchovies processed in Korea and Japan. On the other hand, the lipid oxidation of the imported boiled-dried anchovy was inferior to the domestic boiled-dried anchovy sampled immediately after processing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.390-401
• /
• 2002

This study was to evaluate the fitness and the suitability of size specification of the ready made jacket for women by analysing pattern size and space between skin and clothing using 3D scanner. The results were as follows: 1. Pattern B had the lowest score and the feeling of wearing was significantly different among the given patterns even though all jacket size specification were the same. 2. Ease amount was different between each brand even though the jacket size specification was the same due to the different pattern grading rules. And increasing grading amounts were bigger in horizontal direction rather than in vertical direction. 3. We could obtain accurate a 3 dimensional figure, using 3D scanner which was very useful and more accurate than 2 dimensional data using photography method. 4. Analyzing the average space between skin and clothing of each pattern, there was no significant difference in the average space between skin and clothing among all patterns except waist part of B88 size. And analyzing the average space between skin and clothing of each measured body parts by each size, there existed a significant difference in the interscye, abdomen and hip parts.

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.298-304
• /
• 2010

This study was performed to evaluate functional and textural properties of low-salt pork meat products treated with transglutaminase (TG) using sodium polyphosphate (STPP) and sodium pyrophosphate (SPP). In experiment 1, lightness and yellowness decreased (p>0.05), but moisture content and cooking yield (%) increased with increased salt level (p<0.05). Based on these results, at least 1.0% salt was required to manufacture comminuted pork meat without quality defects. The effect of STPP and SPP with TG in low-salt (1%) pork comminuted shoulder meat products was evaluated in experiment 2. pH values increased with the addition of phosphate (p<0.05), with pH values in treatments containing TG and PP alone or in combination being higher than those with STPP alone (p<0.05). Cooking yield of treatments with TG and phosphates was higher than those without phosphates, but lower than CTL (1.5% salt and 0.4% STPP; p<0.05). Springiness of pork comminuted meat containing SPP was higher than those of CTL (p<0.05). These results indicate that low-salt meat products can be produced by the combination of TG and phosphate either alone or in combination to maintain cooking yield and textural properties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.653-659
• /
• 2017

In this study, the complex forging process of an outer support ring was developed and the prototype was manufactured. The current process, hot forging and MCT machining, has a disadvantage of excessive material removal rates and longer machining hours. To overcome this disadvantage, a general shape is given through hot forging and the precision is achieved through cold forging. The complex forging process was developed with the minimal machining process. Forging analysis was carried out to design a forging process using the commercial program, Deform-3D. The hot and cold forging processes were set up based on the analyzed result. The mold and prototype were manufactured. Hardness, surface roughness, internal defect, the grain low line of the prototype were evaluated. The results showed no particular problems, and there were no problems in mass production. Using complex forging, the material was reduced by approximately 27 % compared to the process using hot forging and MCT machining. In addition, the production speed was improved 2.15 fold compared to that of hot forging and MCT machining. Through this study, a cost-effective process and mold design technology were established, which is expected to have positive effects on other related automotive parts production.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.5
• /
• pp.453-458
• /
• 2024

If you are unable to get comfortable sleep to maintain and recover your health, it will cause a lot of disruption to your daily life. Among the intraoral devices used to resolve snoring, obstructive sleep apnea, bruxism, teeth clenching, and mouth breathing, which interfere with a comfortable sleep, devices that stabilize the lower jaw by moving it forward are a treatment that replaces surgical therapy and positive airway pressure. It is showing effect. During use of the device, a force is generated that causes the lower jaw to return to its original position, so a device that fixes it with screws, rubber bands, etc. is used. To see the effect of the device, you must bite your upper and lower teeth. In order to eliminate the inconvenience of having to stay closed while sleeping, the device is manufactured only in the upper jaw and creates a vertical guideway in the lingual embarasure of the lower jaw in the shape of a key & key way structure, allowing twisting movements and allowing forward and lateral movements. It is about the development of a device that has a blocking function that allows the mouth to be opened while wearing the device and has a function that solves sleep apnea by inducing airway expansion during sleep.