A Study on the Evaluation of Ready-Made Jacket for Women according to Pattern Size Using 3D Scanner

3D scanner를 이용한 여성복 재킷의 패턴 사이즈에 따른 착의평가 연구

  • 서추연 (동아대학교 생활과학대학 의상섬유학부)
  • Published : 2002.03.01

Abstract

This study was to evaluate the fitness and the suitability of size specification of the ready made jacket for women by analysing pattern size and space between skin and clothing using 3D scanner. The results were as follows: 1. Pattern B had the lowest score and the feeling of wearing was significantly different among the given patterns even though all jacket size specification were the same. 2. Ease amount was different between each brand even though the jacket size specification was the same due to the different pattern grading rules. And increasing grading amounts were bigger in horizontal direction rather than in vertical direction. 3. We could obtain accurate a 3 dimensional figure, using 3D scanner which was very useful and more accurate than 2 dimensional data using photography method. 4. Analyzing the average space between skin and clothing of each pattern, there was no significant difference in the average space between skin and clothing among all patterns except waist part of B88 size. And analyzing the average space between skin and clothing of each measured body parts by each size, there existed a significant difference in the interscye, abdomen and hip parts.

본 연구에서는 기성복의 맞음새와 치수체계에 따른 문제점을 제시하기 위하여 현재 시판되고 있는 여성복 재킷을 중심으로 사이즈별 각 패턴의 치수 및 공극량 분석을 실시하였으며 결과는 다음과 같다. 1. 재킷에 대한 관능검사(self sensory test)결과, 패턴 B의 점수가 가장 낮았으며, 동일한 사이즈의 의복임에도 불구하고 재킷의 착용감은 유의적인 차이가 있는 것으로 나타났다. 2. 패턴 계측 결과 각 브랜드간의 패턴 그레이딩 량은 차이를 나타내어 동일한 사이즈임에도 불구하고 여유량이 서로 다르게 나타났으며, 수직방향보다는 수평방향의 증가량이 큰 것으로 나타났다. 3. 3D scanner를 이용하여 인체 및 착의인체를 스캔한 결과, 3차원 입체 형상으로 의복의 착의상태를 볼수 있으므로 2차원 정보를 얻을수 있는 사진촬영 결과에 비하여 활용성이 높으며 촬영거리에 따른 피사체의 왜곡이 없으므로 정확도가 높은 것으로 나타났다. 4. 패턴별 평균공극길이에 대한 유의성 검증 결과, B88사이즈의 허리부위를 제외한 모든 부위에서 유의성이 인정되지 않았으며 사이즈별 평균공극길이에 대한 유의성 검증결과에서는 품, 배, 엉덩이부위에서 유의성이 인정되어 사이즈가 커질수록 이들 부분의 여유량 설정에 신중을 기하여야한다.

Keywords