• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.464-467
• /
• 2008

폐차잔재물중 가연성 성분을 시멘트 제조공정의 열원으로 활용하기 위한 연구가 현재 활발히 진행 중에 있다. 그러나 이러한 폐차잔재물을 시멘트 제조공정의 보조열원으로 사용하기 위해서는 에너지활용에 대한 경제성 및 환경기준과 더불어 시멘트 제조공정의 안정적 조업조건에 대한 검토가 이뤄져야만 하며 특히 폐차잔재물의 연소시 시멘트 제조공정에서의 염소물질의 거동특성에 대한 연구가 반드시 선행되어야만 한다. 따라서 본 연구에서는 이러한 폐차잔재물의 시멘트 제조공정에 대한 열원활용의 최적조건을 도출하고자 현장적용 전 킬른내 염소성분의 제어를 위한 Bypass unit의 Cyclone에 대한 전산모사연구를 수행하였으며 이러한 전산모사결과를 바탕으로 실제 시멘트 제조공정에 대한 폐차잔재물의 현장적용 실험을 수행하였다. 또한 본 연구로부터 시멘트 제조공정에 대한 폐차잔재물의 열원활용 가능성을 확인할 수 있었으며 폐차잔재물의 투입시 시멘트 제조공정의 안정적 조업조건을 확보할 수 있었다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.3
• /
• pp.139-141
• /
• 2013

In respect of environmental hazard or human safety, the use of the chloride-based packaging materials like polyvinyl chloride (PVC) blister and film, Polyvinylidene chloride (PVDC) laminated film has been restricted with national regulations. In this study, I intended to develope the reagent solution for identifying the chloride-based packaging materials, so that it was made by mixing methanol ($CH_3OH$) saturated with sodium hydroxide (NaOH) and pyridine as solvent with same ratio. The efficacy of this reagent solution was verified by the analysis of chemical mechanism and experiments that showed the color change (brown) of the specimens. This analysis methode using reagent solution is so simple, convenient, inexpensive and immediate that I expect it will be useful in the field of packaging.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.709-712
• /
• 2007

폐차잔재를 시멘트제조공정의 열원으로 활용하기 위해서는 연료로 사용하기 위한 경제성과 더불어 시멘트제조공정 및 품질 그리고 환경기준을 만족해야 한다. 따라서 폐차잔재의 최적투입방법과 폐차잔재의 연소시 염소물질의 거동특성에 대한 연구가 선행되어야만 한다. 본 연구에서는 이러한 폐차잔재의 시멘트 킬른 현장적용에 따른 위험요소와 시행착오를 최소화하기 위하여 최적 연료화 조건에 대한 전산모사 연구를 하였으며 전산모사의 대상공정으로는 폐차잔재가 투입될 Precalciner와 염소제어를 위하여 Bypass unit가 설치될 Precalciner의 하단부 그리고 Cyclone을 선정하여 입자 및 가스상의 거동 특성을 고찰하였다. 본 연구로부터 폐차잔재의 투입위치로는 현재의 석탄 투입위치를 활용하는 것이 효과적일 것으로 판단되었으며 Precalciner의 하단부에 대한 가스상 및 입자상의 거동특성을 활용하여 Bypass unit를 설치할 최적의 위치를 선정할 수 있었다. 또한 Cyclone의 입자 거동특성 결과로부터 염소 제어를 위한 각 Cyclone의 입자회수율에 대한 정보 및 공정의 개선 가능성을 확인할 수 있었다.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.5
• /
• pp.575-581
• /
• 2015

Although disinfection in drinking water treatment plants provides a safer water supply by inactivating pathogenic microorganisms, harmful disinfection by-products may be formed. In this study, the disinfectant, chlorine, was produced on-site from the electrolysis of salt (NaCl), and the by-products of the disinfection process, bromate and chlorate, were analyzed. The provisional guideline levels for bromate and chlorate in drinking water are $10{\mu}g/L$ and $700{\mu}g/L$, in Korea, respectively. Bromide salt was detected at concentrations ranging from 6.0 ~ 622 mg/kg. Bromate and chlorate were detected at concentrations ranging from non-detect (ND) ~ 45.3mg/L and 40.5 ~ 1,202 mg/L, respectively. When comparing the bromide concentration in the salt to the bromate concentration in the chlorine produced by salt electrolysis, the correlation of bromide to bromate concentration was 0.870 (active chlorine concentration from on-site production: 0.6-0.8%, n=40). The correlation of bromate concentration in the chlorine produced to that in the treated water was 0.866.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.577-583
• /
• 2022

On large-scale sites, concrete is often delivered from a number of ready-mixed concrete companies, but even if the same concrete mixture table is used, it is thought that there will be a difference in quality due to differences in materials and manufacturing equipment. Due to a lack of previous research in this area, this study measured the properties of fresh concrete, compressive strength, and chlorine ion diffusion coefficient using the concrete supplied by 12 ready-mixed companies in Busan. The fresh concrete properties met the criteria. The compressive strength increased by 137% for 30MPa, 131% for 45MPa, and 117% for 80MPa by specified compressive strength. For the chlorine ion diffusion coefficient, the average value for each specified compressive strength could be derived without significant variation. The higher the compressive strength, the greater the deviation , and the lower the compressive strength, the greater the deviation in the chlorine ion diffusion coefficient.

• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.217-224
• /
• 2007

This study reports the properties of high early strength & durability of concrete using PC admixture. To apply these data to construction site, we did the lab tests. The target of this study is to accomplish early strength of concrete (5.0 Mpa/18 hr), and we did the durability tests such as length change test, chloride ion penetration test, fleeting and thawing test, adiabatic test, etc. And we tested the porperties of concrete by the different factors, such as the type of admixtures, curing temperature, the amount of binder, etc. Through the test of concrete using the different type of admixture, PC type was more excellent than PNS type admixture. As a result, we made a concrete of high early strength concrete, and excellent durable concrete. According to these tests, we concluded that we can apply this type of PC admixture to the civil & construction site, and we can reduce the term of works and finally we will accomplish the economical construction.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.6
• /
• pp.507-515
• /
• 2018

The purpose of this research is to develop a slurry-type accelerator that contains various beneficial properties such as reduction of dust generation, lower alkalinity, early age strength development, etc., and uses such slurry type accelerator to produce high performance shotcrete that present excellent resistant against chloride ion penetration. In this work, shotcrete mixtures of 0.44 and 0.338 water-to-binder ratio (w/b) were produced at construction site using slurry-type accelerator. The mechanical properties and chloride ion penetration resistance of such shotcrete (including base concrete) were evaluated. According to the experimental results, the slurry-type accelerator was successfully used to produce both w/b 0.44 and 0.338 shotcretes. The 1 day and 28 day compressive strength of shotcrete were found to be closer to or higher than 10MPa and 40MPa, respectively. The w/b 0.338 shotcrete that used 40% replacement of blast furnace slag showed lower compressive strength than w/b 0.44 shotcrete without any mineral admixture at 1 day. However, the compressive strength with 40% blast furnace slag increased significantly at 28 day. Moreover, there was more than 50% increase in chloride ion penetration resistance with blast furnace slag, showing its strong potential for higher performance shotcrete application.

• Resources Recycling
• /
• v.19 no.3
• /
• pp.24-32
• /
• 2010

In the present work, a new separation system with rotating rakes has been developed to separate the film-based plastics from the recyclable materials, and environment assessment is also carried out during operation of the device. Capacity of the device was about 5.3 ton/hr at a rakes rotation speed of 26.0 rpm (the number of rakes in the 1st, 2nd and 3rd trials were 39, 52 and 48, respectively) and a belt conveyor speed of 38.5m/min, which satisfied the initial design capacity (5.0 ton/hr). Recovery ratio and purity of the plastic films were 92.6% and 96.5%, respectively at a rotation speed of 28 rpm. The levels of noise, vibration and particulate emission were below material standard regulatory limits. Plastic refused fuel (RPF) was also prepared with the recovered films. The calorific value and chlorine content of the prepared RPF were 9,740 kcal/kg and 0.18%, respectively which satisfy the first grade quality specification of the Korean RPF standard. As a result of this work, recovery of energy resources from the municipal solid waste is possible by adopting the developed separation device.