• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.273-283
• /
• 2018

The purpose of this study is to analyze the optimum driver selection according to shaft intensity, shaft length and shaft weight that are determining factors of driver shot. To achieve the above purpose, the subject were participate with handicap zero 10 male pro golfer and mean score 90(handicap about 18) amateur 10 male golfer. The used club limited number 1 driver, we tested 24 driver which is shaft intensity, length, weight, total weight and swing weight. Dependent variable was strike ball speed, flying distance and head speed. The findings can be summarized as follows. First, There is a significantly difference in CPM. Ball speed, head speed and flying distance according to driver shaft intensity were found to be the best when CPM is 230<. Second, There is a significantly difference in shaft length. Ball speed, and head speed according to driver shaft length were found to be the best at 46 inch and flying distance were found to be the best at 45 inch. Third, There is not significantly difference in SW. Ball speed and flying distance according to driver shaft weight were found to be the best with 65g. In the case of head speed, it was the fastest with 50g shaft. Four, total variables were significantly difference between in pro and amateur golfer. In conclusion, there would be differences in individual physical condition but the best result was found with a driver of CPM 230<, shaft length 46inch, and shaft weight 65g.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.217-225
• /
• 2019

The aim of this study was determine to effect of shaft length and physical condition on golf driving performance(head speed, distance and direction). A range of drivers with length between 44 inch, 45 inch and 46 inch limit imposed by R&A rules limited were assembled and evaluated. Club head speed and drive distance and accuracy were determined three category 27 PGA pro golfer (handicaps 0, and height $170cm{\geq}171-175{\geq}175-180cm$) who golf performance. As a results follow : Head speed was significantly difference with 44, 45 between 46inch(p<.01). Distance was significantly difference with 44 between 46inch(p<.05). And direction was significantly difference with 44, 45inch between 46inch(p<.05). Head speed according to height was general similarity among shaft length in 170cm, 171-175cm. Distance were general similarity among shaft length in 170cm, and significantly difference with 44inch between 46inch in 171-175cm(p<.01), and significantly difference with 45inch between 46inch in 176-180cm(p<.05). Direction were significantly difference with 44inch between 46inch in 170cm(p<.05), but do not significantly difference with 44inch between 46inch in 176-180cm, 176-180cm. These results show that shaft length and height can affect head speed, distance and direction.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2021

The purpose of this study was to analyze relationship between biomechancal factors and diver's distance during golf driver swing. Fifteen professional golfers were participated in as subject. Eight motion capture cameras(250 Hz), 2 force plates(1000 Hz), and Trackman were used to collect kinematic and kinetic datas. It was performed Pearson's correlation analysis using SPSS 24.0. The level of significance was at .05. Ball speed, club head speed, X-Factor, and ground reaction force were correlated on driving distance, However, smash factor and knee moment were not correlated on driving distnace. Ball speed, club head speed, X-Factor, and ground reaction force were effected to driving distance, but smash factor and knee moment were not effected to driving distance.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.500-507
• /
• 2012

The purpose of this study was to investigate the effects of medicine ball throwing for weight shift training, that make improvements on golf physical fitness and performance. This training was related to physical fitness and golf performance in beginner golfer, undergraduates 20 males(10 exercise groups, 10 control groups) during 10 weeks. Variables were strength, flexibility, headspeed and distance. Training course were devided 2 sessions. In 1 to 5 weeks, using 3kg medicine ball, in 5 to 10 weeks, using 5kg medicine ball. Throwing method imitated golf swing, address, backswing, follow-through by throwing medicine ball. The Results were as follows; Medicine ball throwing for weight shift training showed significant difference in strength, flexibility, headspeed and distance in Exercise Group statistically. In conclusion, Medicine ball throwing for weight shift training improved strength, flexibility, headspeed and distance. So, it could be considered very effective training method as warming-up and main exercise.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.287-296
• /
• 2009

This is written to present basic shot information among iron clubs and information of weight shift, because previous study conducted on all clubs was rut enough. This article is about shot analysis of iron club 3,4,5,6,7,8,9 and weight movement, conducted on four skilled golf players and four students who major in golf and are less than three years. The analysis of long and short irons showed statistically meaningful different results for all the participants but iron clubs of 3,4,5 didn't in head speed and ball speed. The skilled group showed better results in head speed, ball speed and direction, Launch angle than the unskilled group. In weight shift movement analysis, the unskilled group moved, on back swing top, their more weight(65.36%) but the skilled group was on their left foot (70.21%)when clubs were on impact moment. It shows that the skilled group put on power more efficiently by moving weight.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.6
• /
• pp.1-6
• /
• 2014

The delay-insensitive Null Convention Logic (NCL) asynchronous design as one of innovative asynchronous logic design methodologies has many advantages of inherent robustness, power consumption, and easy design reuses. However, transistor-level structures of conventional NCL gate cells have weakness of low speed, high area overhead or high wire complexity. Therefore, this paper proposes a new high-speed NCL gate cells designed at transistor level for high-speed, low area overhead, and low wire complexity. The proposed NCL gate cells have been compared to the conventional NCL gates in terms of circuit delay, area and power consumption.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.112-118
• /
• 2015

Conventional synchronous circuits cannot keep the circuit performance, and cannot even guarantee correct operations under the influence of PVT variations and aging effects in the nanometer regime. Therefore, in this paper, a DI (delay insensitive) design based NCL (Null Convention Logic) design methodology with a very simple design structure has been used to design digital systems, which is one of well-known asynchronous design methods robust to various variations and does not require any timing analysis. Because circuit-level structures of conventional NCL gates have weakness of low speed, high area overhead or high wire complexity, this paper proposes a new lNCL gates designed at the transistor level for high-speed, low area overhead, and low wire complexity. The proposed NCL gate libraries have been compared to the conventional NCL gates in terms of circuit delay, area and power consumption using a asynchronous multiplier implemented in dongbu 0.11um CMOS technology.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.538-538
• /
• 2008

금속계열의 박막을 평탄화하기위해서는 슬러리에 함유된 산화제에 의해 부동태층의 형성이 선행되어야 한다. 따라서 본 논문에서는 Copper 박막의 표면을 부동태층으로 형성시키고 CMP공정을 하기위해 산화제에 dipping을 시켰으며 삼화제의 종류는 $H_2O_2$, MSW2000B, $KIO_3$로 하고 dipping 시간은 30초, 60초, 90초, 3분, 10분으로 하여 시간과 산화제 종류에 따른 부동태층의 변화를 연구하였다. 부동태층의 관찰은 FESEM을 이용하여 표면과 단면을 관찰하였고 부동태층의 조성비율은 EDX를 이용하여 조사하였다. MSW 2000B의 경우는 부동태층이 덩어리 모양으로 형성되었으며 포화현상은 3분에 일어났다. 반면에 $H_2O_2$의 경우는 부동태층이 침상 모양으로 형성되었으며 포화현상은 90초에 일어났다. 산화제에 의해 부동태층을 형성시킨 후 POLI-450을 이용하여 평탄화공정을 진행하였으며 CMP공정조건은 부동태층의 연질상태임을 감안하여 헤드 스피드 20rpm, 플레이튼 스피드 10rpm, 슬러리 주입속도 90ml/min, 공정온도는 상온으로 하여 진행하였다. $H_2O_2$를 산화제로 사용하여 dipping을 하고 CMP를 하였을 경우에 균일한 박막을 확보 할 수 있었으며 CMP 공정 후 copper 박막의 균일성은 FESEM을 이용하여 관찰 하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.2
• /
• pp.532-542
• /
• 2021

The purpose of this study was to investigate the body's strategy through kinematic variables of the lower extremities and ground reaction forces to maintain the club-head speed and ball accuracy despite the three stances during the golf swing. Ten male golfers who official handicap two were participate in the experiment. All subjects performed swing after maintaining the address posture according to stance conditions(square; SS, open: OS, closed: CS). Using a 3D motion analysis system and force plateform, the results were calculated with the 7-iron full swing each stance. In result, there was no difference in center of displacement, and left and right hip and knee joint angle displacement. Left ankle joint was largely plantar-flexed in OS, and right ankle joint was largely performed in CS from the address to the downswing. From address to take-back, right foot had a large left direction and the left foot had a right direction were greater in OS than in CS. Therefore, despite various stances, maintaining the same posture at impact is thought to have a positive effect on club head speed and ball direction.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.69-77
• /
• 2020

Korea's golf fever is as good as the United States, Europe and Japan, which are called golf powers. The senior golf population over 55 years old has exceeded 2.5 million, and they are more interested in improving golf performance than participating in golf. So, this study aims to emphasize the importance of dynamic preparation exercise by identifying the effects of dynamic preparation exercise on golf physical strength and golf batting in order to suggest a way to help the elderly men's golf performance. The experimental group(n=13) and the control group(n=14) were divided into two groups and repeated measurements were conducted by two-way ANOVA with pre- and post-design. As a result of the analysis, the flexibility factor showed a positive effect on golf physical strength, and in golf batting, head speed, distance, and attack angle showed interaction effect, which led to the conclusion that dynamic preparation exercise helped the golf performance of the elderly male. Therefore, the continuous dynamic preparation exercise led to positive transition to head speed and attack angle due to the increase in the flexibility of the body, which led to the improvement of distance and the increase in performance level.