• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.1
• /
• pp.1-12
• /
• 2000

펌프는 다르 진동 유발원들과는 달리 일정한 주파수 및 크기를 갖는 진동을 일으키므로 스프링이나 댐퍼와 같은 간단한 방진기기를 이용하여 진동을 제어할 수 있다 현재 국내에서는 대부분의 펌프에 이러한 방진장치를 설치하는 것이 일반화되어있다 그러나 펌프의 용량 및 중량 주변 구조물의 형태 및 크기 등에 따라서 방진기구의 채택이 불필요한 경우도 있으므로 설비 진동기초에 대한 획일적인 설계와 시공개념은 불필요한 인적, 시간적 및 경제적인 낭비를 초래할 수 있다. 따라서 본 연구에서는 사무용 건무에 사용되는 각종 펌프류에 대하여 가진특성과 구조물의 진동가속도응답을 측정하는 진동실험 및 이론적 해석을 실시하고 본래 계와 수정된 계의 진동을 답과 허용진동수준을 비교.분석함으로서 방진장치의 설치가 불필요한 펌프용량을 제시하였다.

• Proceedings of the Korean Society of Food Hygiene and Safety Conference
• /
• 2002.05a
• /
• pp.225-225
• /
• 2002

• Korean journal of applied entomology
• /
• v.54 no.1
• /
• pp.1-6
• /
• 2015

This study was conducted to estimate the economic injury level (EIL) to leaf broccoli (leaf vegetable) by the diamondback moth (Plutella xylostella L.) in 2007 and obtain basic data for pest management. To investigate the relationship between initial density of diamondback moth larvae and broccoli leaf yield, experimental plots with five treatments (0, 0.5, 1.0, 1.5 and 2.0 larvae per plant) as initial density were established. We inoculated larvae on cheesecloth covering to survey changes in larval density. When grown for consumption, leaves of broccoli are harvested in periods. High levels of larvae were associated with significant reductions in leaf yield. There were 0%, 15%, 35%, 42%, 44% yield reductions due to a density of 0, 0.5, 1.0, 1.5, 2.0 diamond back moth larvae per plant, respectively, 25 days after larva inoculation. The regression equation used to predict leaf yield based on the number of initial larvae per plant was y = 1636-394x($R^2=0.79^{***}$>). EIL of the diamondback moth on leaf broccoli was 2~3 larvae per 10 plants for a damage level of 5%. The economic threshold was 1~2 larvae per 10 plants. Thus, diamondback moth management should be initiated when 1~2 larvae appear on 10 plants.

• Korean Journal of Food Science and Technology
• /
• v.24 no.6
• /
• pp.563-567
• /
• 1992

Out of 74 food samples including pickled radish, soy sauce, Lactobacillus drinks, frozen sweets and snack confections, 60 samples were found to contain saccharin. The contents of sacchrain in terms of maximum and positive mean were 541, 306 ppm in pickled radish, 302, 153 ppm in soy sauce, 66, 37 ppm in Lactobacillus drinks, 90, 51 ppm in frozen sweets and 606, 285 ppm in snack confections, respectively. Most food items did not exceed the tolerance limit of saccharin while 70% of snack confections exceeded the limit, the average concentration being 2.9 times of the limit. Total daily intake of saccharin by Korean population for the period of $1985{\sim}1990$ was estimated to be $7{\sim}17\;mg/person$ from consumption data and $9{\sim}35\;mg/person$ from supply data. The intake level was $11{\sim}22%$ of acceptable daily intake for man (ADI) recommended by FAO/WHO whereas the level was slightly higher than that in USA or Japan. It is. therefore, judged that saccharin at the current pattern of usage will not exhibit any adverse effect on the safety of Korean population.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.309-314
• /
• 2011

As a system becomes more complex, a design relies more heavily on a methodology based on high-level abstraction and functional verification. SystemVerilog includes characteristics of hardware design language and verification language in the form of extensions to the Verilog HDL. However, the OOP of System Veri log does not allow multiple inheritance. In this paper, we propose adoption of SystemC to introduce multiple inheritance. After being created, a SystemC unit is combined with a SystemVerilog-based verification environment using SystemVerilog DPI and ModelSim macro. Employing multiple inheritance of SystemC makes a design of a verification environment simple and easy through source code reuse. Moreover, a verification environment including SysemC unit has a benefit of reconfigurability due to OOP.

• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.1-9
• /
• 2020

In Korea, hydrogen stations are being promoted and commercialized. However, the risk assessment for the hydrogen station is not clear. In particular, it is not clear how to calculate the risk and acceptable criteria for a hydrogen station. Therefore, in this study, three hydrogen stations being installed were selected and general risks were calculated and the social risk of each hydrogen station was calculated. In general, the method of risk assessment is individual/social risk. This is an individual's death rate considering the frequency of accidents, And the likelihood of death according to the number of nearby residents. These can be used to calculate the level of risk for a hydrogen station. However, this method of calculate risks is the criteria for judging whether it is acceptable are unclear. For this reason, this study investigated the allowable standards for foreign risks and considered that they were acceptable by applying the risks of selected domestic hydrogen stations.

• Journal of Food Hygiene and Safety
• /
• v.3 no.3
• /
• pp.131-137
• /
• 1988

A pesticide monitoring survey was undertaken for the both 30 samples of pears and sweet persimmons from chief producing districts in1985 to evaluate pesticide residues in these agrcultural products and also to give basic informations in establishing maximum residue limits. Pesticide residues in pears were detected with fairly low in 7-60% of total samples. Even the maximum residue levels were only in the amount of 1/53-2/3 compared with maximum residue limits established in fruits in Environment Administration, Korea. Most of the residues (71-82%) was remained in peels of pears. Incase of sweet persimmons, captan, captafol, EPN, parathion, and phenthoate residues were also detected with fairly low in 3-20% of total samples. Presently, it is considered that pesticide residues in pears and sweet persimmons may be no harmful levels for food commodities.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.550-557
• /
• 2017

Owing to the established international standards for reliability and safety management of railways and the third-part conformity assessment implementation, quantitative risk assessment focusing on communication system related to railway safety has being implemented. The quantitative risk assessment starts from the establishment of quantitative RAMS requirements; the risk has to be maintained under an acceptable safety level. This paper introduces the risk assessment process based on international standards ; risk assessment was conducted using failure data for railway facilities for about 5.5 years. In addition, based on the results, a scientific risk management method for railway facilities is suggested.

• The Korean Journal of Pesticide Science
• /
• v.14 no.3
• /
• pp.241-246
• /
• 2010

Field experiments were carried out to establish economic threshold for com borer (Ostrinia furnacalis (Guen$\'{e}$e)) on waxy com plants by examining the number of adult insects caught in pheromone traps and the injury levels of waxy com which were artificially controlled. Adult com borers were lured into the pheromone traps during the whole growth period in five areas in Gangwon province including Chuncheon. The number of com borers trapped was the greatest in Chuncheon followed by Cheolwon and Hongcheon, and the same trend was observed for injury level of waxy com. Based on marketable yield data of waxy com plants related to the artificially-controlled injury levels at tassel stage, spray threshold was determined as the injury level of 11~15%, where the injury of com plants exceeded the economically admitting level.

• Explosives and Blasting
• /
• v.21 no.3
• /
• pp.61-71
• /
• 2003

최근 도심지 굴착공법 선정시 주변환경에 대한 관심이 높아지면서 민원발생을 감안하여, 발파공법이 아닌 기계굴착공법(TBM, SHIELD 등) 등이 부분적으로 적용되고 있다. 그러나 이들 굴착공법들은 굴착조건의 변화에 따라 적용 한계성이 있고, 한계구간이 직면할시 시공성이 극히 떨어지거나 적용 자체가 불가능하게 된다. 이에 따라, 공사기간의 연장, 공사비의 증가 및 적용자체가 불가 할 경우는 공사중단에 이르게 되어 시공과정에서 다른 굴착공법으로 전환되는 사례가 빈번히 발생되고 있다. 따라서 본 사례는 도심지 터널구간으로 당초 할암공법으로 설계되었으나 암반의 강도가 높고 굴착단면적이 협소하여 할암공법이 적용될 수 없었다. 이에 대한 대안공법으로 TBM이나 기타 장비에 의한 기계굴착공법을 검토하였으나, 터널연장이 짧고 터널노선의 곡선부 반경이 작아 대형장비의 투입이 어려운 굴착조건 때문에 최종적으로 폭약을 이용한 발파굴착 공법을 선정하였다. 그러나 발파공법은 진동 및 소음이 필연적으로 수반되기 때문에, 주변 환경공해가 허용하는 범위 내에서 최대한의 시공성과 안전성 여부를 판단하기 위하여 발파진동 및 소음의 허용수준을 설정한 후 시험발파를 실시하였으며, 그 결과에 따라 진동제어발파공법을 적용하였다.