• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.65-82
• /
• 2017

The result of a preliminary safety assessment that was completed by applying the radionuclide inventory calculated on the basis of available data from radioactive waste generation agencies suggested that many difficulties are to be expected with regard to disposal safety and operation. Based on the results of the preliminary safety assessment of the entire disposal system, in this paper, a unit package exceeding the safety goal is selected that occupies a large proportion of radionuclides in intermediate-level radioactive waste. We introduce restrictions on the amount of radioactivity in a way that excludes the high surface dose rate of the package. The radioactivity limit for disposal will be used as the baseline data for establishing the acceptance criteria and the disposal criteria for each disposal facility to meet the safety standards. It is necessary to draw up a comprehensive safety development plan for the Gyeongju waste disposal facility that will contribute to the construction of a Safety Case for the safety optimization of radioactive waste disposal facilities.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.2
• /
• pp.91-100
• /
• 2016

The neutron activation inventories in reactor vessel and its internals, and bio-shield of a PWR nuclear power plant were calculated to evaluate the effect of impurity elements contained in the structural materials on the activation inventory. Carbon steel is, in this work, used as the reactor vessel material, stainless steel as the reactor vessel internals, and ordinary concrete as the bio-shield. For stainless steel and carbon steel, one kind of impurity concentration was employed, and for ordinary concrete five kinds were employed in this study using MCNP5 and FISPACT for the calculation of neutron flux and activation inventory, respectively. As the results, specific activities for the cases with impurity elements were calculated to be more than twice than those for the cases without impurity elements in stainless and carbon steel. Especially, the specific activity for the concrete material with impurity elements was calculated to be 30 times higher than that without impurity. Neutron induced reactions and activation inventories in each material were also investigated, and it is noted that major radioactive nuclide in steel material is Co-60 from cobalt impurity element, and, in concrete material, Co-60 and Eu-152 from cobalt and europium impurity elements, respectively. The results of this study can be used for nuclear decommissioning plan during activation inventory assessment and regulation, and it is expected to be used as a reference in the design phase of nuclear power plant, considering the decommissioning of nuclear power plants or nuclear facilities.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.145-150
• /
• 2005

To dispose of radwaste in a repository, the safety of disposal must be ensured. This study developed a program for estimating radionuclide accumulation of radwaste, based on the material balance method, one of the indirect methods, and performed application evaluation during the 9th preventive maintenance period of Gori Plant 4, one of the commercial power plants in Korea. First of all, to ensure the technique developed in this study is assessed accurately, this study utilized the data regarding the radionuclide removal in the purification system during the shutdown water chemistry control, and a related estimation technique called SCALP. The target nuclide was Co-60, and it turned out that the relative error was less than $1\%$. The estimation result was compared with the result of direct measurement of the radwaste during the corresponding period as presented by commercial power plants. The result showed that the quantity of Co-60 measured by the direct method was about $50\%$ less than that calculated by the technique developed in this study.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.1
• /
• pp.77-85
• /
• 2004

Regulations and guidelines for radioactive waste disposal require detailed information about the characteristics of radioactive waste drums prior to transport to the disposal sites. However, estimation of radionuclide concentrations in the drummed radioactive waste is difficult and unreliable. In order to overcome this difficulty, scaling factor (SF) method has been used to assess the activities of radionuclides, which could not be directly analyzed. A radioactive waste assay system has been operated at Korean nuclear power plant (KORI site) since 1996 and consolidated SF concept has played a dominant role in the determination of radionuclide concentrations. However, SFs are somewhat dispersive and limited in KORI site. Therefore establishment of the assay system using more improved SFs is planned and progressed. In this paper, the scope of research is briefly introduced. For the selection of more reliable activity determination method, the accuracy of predicted SF values for each activity determination method is compared. From the comparison of each activity determination method, it is recommended that SF determination method should be changed from the arithmetic mean to the geometrical mean for more reliable estimation of radionuclide activity. Arithmetic mean method and geometric mean method are compared based on the data set in KORI system. And, this change of SF determination method will prevent an inordinate over-estimation of radionuclide inventory in radwaste drum.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.10a
• /
• pp.363-364
• /
• 2010

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2015.10a
• /
• pp.185-186
• /
• 2015

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.10a
• /
• pp.379-380
• /
• 2011

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.10a
• /
• pp.489-490
• /
• 2011

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.3
• /
• pp.281-299
• /
• 2017

The inventory management of radionuclides is essential for the safe management of disposal facilities. In this study, we compared the activity of dry active waste predicted using the generated waste data and that measured for the accepted waste in the disposal facility. For very low level waste, the measured activity was higher than the predicted activity for $^{137}CS$, $^{90}Sr$, $^{99}Tc$ and $^{129}I$. In low level waste, the predicted activity was higher than the measured activity for all radionuclides. We also evaluated the variation in the predicted quantity and total activity of each level of dry active waste through a sensitivity analysis on a scaling factor. This result will contribute to the construction of a Safety Case and safe operation of disposal facilities.

• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.376-377
• /
• 2011