• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.253-255
• /
• 2013

수요가 늘어가고 있는 부유식 해양플랜트 구조물의 열악한 해양환경에서의 구조물의 노후화, 사고발생 가능성에 대비해 지속적인 평가가 필요하나, 기존의 구조물에 사용되는 안전성 평가 기법으로는 한계가 있어, 상시적인 구조물의 건전성 평가기법이 필요하다. 그래서 본 연구에서는 상시적인 구조물의 건전성 평가기법을 위해 부유식 구조물의 상시적인 응답 가속도를 추출하여 해당 구조물의 동적특성을 추출 하였다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.13-20
• /
• 1996

해양공간 활용을 위해 예상되는 부유식 해양구조물은 단위구조들이 결합된 형태의 초대형 구조물로서 단위 구조물간의 탄성변형 문제가 매우 중요시되고 있으며 이에 따라 단위구조물간의 상호작용이 고려된 유체력 산출과 탄성응답이 고려된 해석법의 개발이 전세게적으로 활발히 이루어지고 있다. 독립 부유구조물 자체의 크기가 대형화될 때 발생하는 탄성 변형 또한 구조 해석 및 진동관점에서 중요한 고려사항이며, 이는 조선공학분야에서 유탄성 해석기법에 바탕을 두고 연구가 활발히 진행중이다. 본 고에서는 부유구조물의 설계에 있어 핵심기술중 하나인 파랑응답 해석기술의 현황에 대해 살펴보고 현재 한국기계연구원에서 수행중인 국책연구개발사업 "해양공간이용 대형 복합플랜트 개발"의 세부과제인 "부유구조물 파랑응답 해석기법 개발"의 추진내용에 대해 환경 하중/응답해석기술, 계류시스템 설계/해석기술, 유탄성응답 해석기술로 나누어 소개하고자 한다. 해석기술로 나누어 소개하고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.75-81
• /
• 2000

Very large floating structures have rather small motion characteristics except their ends, where the motions become much larger due to the elastic motion of the structure. This paper presents the numerical predictions of hydroelastic behaviors of VLFS in irregular waves. To predict motion responses of structure in irregular waves, the source-dipole distribution method and finite element method is used.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.36 no.1
• /
• pp.1-10
• /
• 2024

As increasing demands for a floating structure expanded from offshore industry facilities to living facilities, it has emerged that necessity of techniques to reduce motions of a floating structure. This study present a floating structure with porosity on the outer surface of the floater. Under each regular and irregular wave, responses of the floater was investigated in frequency domain. The proposed structure is composed of inner and outer floaters, which are connected to each other and the outer wall is perforated, and the heave and the pitch of floaters with different perforation rates (0~30%) were compared with at both the center and the edge. The results showed that pitch responses can be decreased by increasing of perforation rate of the floater. Comparing with responses of the non-perforated floater, those of the proposed floating structure were reduced to above 10% and 2%, respectively for regular and irregular wave conditions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.6
• /
• pp.577-583
• /
• 2012

Structures floating in the ocean experience various kinds of external loads, among which wave load is considered as determining factor in structural design. Its relative size compared with wavelength may be used to classify whether the structure is relatively small or large. Traditionally, the small structures are assumed to have little diffraction and the wave loads on large structure are usually calculated by only considering inertia force according to diffraction. In this paper, rectangular floating structures usually used in the ocean, river, and lake are used to find the relationship between hydrodynamic forces and its structural response.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.122-125
• /
• 2010

본 논문에서는 부유식 원유저장 해양구조물(FSU; Floating Storage Unit)의 상부 하역구역(Laydown Area) 내에 낙하물(Dropped Object)이 떨어질 경우의 충격 구조 안전성 평가(Structural Safety Assessment)를 수행하여 표준해석 절차서를 정립하고자 한다. 이를 위해서는 내충격 구조해석을 통한 평가 기법을 개발하고 그 기법의 적용성을 검토하여 표준해석 절차서를 정립하는 것이 필요하다. 현재는 충격 구조해석 시나리오를 작성하고 내충격 구조해석을 수행하여 설계기준(design criterion)에 적용하고 있는 중간단계로써 그 결과들을 소개하고자 한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.275-289
• /
• 2022

New businesses such as marine leisure and floating construction have recently flourished on the coast. As a result, consideration is given to a floating structure appropriate for marine environments. In this study, we applied a damping plate to increase the stability of a hybrid floating structure that was expanded by vertical and horizontal stacking of mobile unit modules. In the numerical analysis using ANSYS AQWA, the behavioral characteristics of the floating structure were analyzed according to the length change of the damping plate. However, the wave forces acting on a floating structure are excessively calculated by the resonance of fluid surrounded by the structure in the numerical analysis using potential flow. Therefore, we used the damping zone option of the ANSYS AQWA in the frequency domain analysis.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.928-936
• /
• 2022

According to the current status of marine accidents in Korea, the number of accidents is steadily increasing by an approximate average of 8.5% per year, and marine accidents are steadily increasing for ships and structures such as floating barges, tugboats, ferries and floating platforms except for fishing ships. In this study, domestic floating structures were classified according to the type of floating structure, and the regulation system and the scope of the application of floating marine structures were schematically illustrated according to related domestic laws such as the Ship Safety Act, Ship Act and Fishing Management and Promotion Act. In addition, considering the state of the marine environment, it was intended to discover structurally delicate parts and risk factors early in blinded safety spots in applying domestic regulations, and to derive effective improvement measures for the discovered risk factors.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.125-137
• /
• 1996

Experimental wind tunnel tests have been attempted to investigate the aerodynamic characteristics of floating offshore structure using some types of scaled mldels. The static behaviors of lift, drag forces and pitching moment of its models are measured to exammine the relationship between wind loads and incidence angle, wind velocity, shape of models. The effect of solid ground has been obtained also.

• Journal of Ocean Engineering and Technology
• /
• v.3 no.2
• /
• pp.145-157
• /
• 1989

본 논문의 주목적은 불연속 또는 연속계 구조물의 시스템 신뢰성해석(system reliability analysis)을 위한 보다 일반적인 방법을 소개하는데 있다. 본 논문에서는, 확대하중증분법(extended incremental load method)이라고 불리우는데, 지금까지의 신뢰성 해석법 중 종래의 하중증분법이 갖는 단점을 보완하고, 여러 형태의 하중이 작용하는 구조물에 대해, 부재의 파괴후 거동(post-ultimate behaviour)을 다른 방법보다 더 실제적으로 고려할 수 있는 장점을 갖도록 개발한 것이다. 본 방법의 또 하나의 장점은 구조설계시 사용하는 강도공식(strength formula) 을 시스템 신뢰성 해석에서 직접 이용할 수 있다는 점이다. 이 방법은 부유식 해양구조물 같은 연속계 구조물의 시스템 신뢰성 해석을 위해 개발되었는데, 이 논문에서는 실제 구조물은 다루지 않고, 방법의 정당성과 아울러 수정된 안전여유식의 적용가능성을 보여주는 것에 중점을 두었다. 본 논문의 부유식 해양구조물들에 적용한 결과는 후일 발표할 예정이다.