• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.209-216
• /
• 2020

In this paper, parametric structural analysis is presented utilizing the co-rotational(CR) shell analysis utilizing EDISON. CR shell analysis shows faster convergence than the commercial software, NASTRAN, does. The 1st natural frequency of the rear frame is obtained, which is close to that of the engine during high speed cruise. Three cases under two design variables are presented and analyzed. Gusset is shown to be more effective among those which feature the same weight change. The results presented in this paper will be applicable for further researches to improve the durability of a motorcycle rear frame.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.574-578
• /
• 2011

본 논문에서는 해저케이블 부두 하역용 장비인 코일링 암(coiling arm)에 대한 구조설계 및 해석을 수행하였다. 본 연구에서는 구조설계를 위해 3차원 CAD프로그램을 이용하여 모델링하였고 구조해석 프로그램을 이용하여 유한요소법에 기초한 전산해석 기법으로 해석을 수행하였다. 코일링 암의 목적에 맞추어 케이블을 케이블 탱크에 가이드 할 수 있도록 베어링 및 롤러를 설계하여 메인 암이 회전하고 케이블 가이드가 이동할 수 있도록 하였고, 기존의 외국 모델에서 사용하던 와이어 및 모터 시스템을 이용한 케이블 가이드 작동방식을 유압 시스템을 이용한 작동방식으로 변경하여 설계 및 제작이 쉽고 사용자가 직관적으로 작동할 수 있도록 설계하였다. 자중 및 케이블 하중에 대한 응력 해석을 수행하였고, 유압시스템에 의한 파손 가능성을 고려하였다. 케이블 가이드에 이동 및 지면 경사도에 따른 전복해석을 수행하였으며, 설치 장소를 고려한 풍하중 효과도 추가로 고려하였다. 본 연구를 통해 코일링 암의 작동방식을 개선하였으며 설계 및 해석 방법을 확립과 더불어 국내 최초로 실제 코일링 암을 제작 및 설치하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.285-288
• /
• 2008

Analytical studies are performed to evaluate the feasibility of column-type hybrid damper for seismic rehabilitation of existing buildings. For this purpose, at first, analytical model which can simulate the hysteretic behavior of column-type hybrid damper is proposed for use of commercially-available structural analysis program (MIDAS). Also seismic rehabilitation effects by column-type hybrid damper were evaluated by time history analysis for the existing building with vertical extension. From the analysis, it was found that base shear of typical building is reduced about 20% and story drift was reduced around 20% at critical story.

• Fire Science and Engineering
• /
• v.19 no.4 s.60
• /
• pp.18-25
• /
• 2005

In this study, numerical analysis of two-dimensional unsteady natural convection of air in a square enclosure heated from below, was performed as a basic research of fire science. SIMPLE algorithm was used to the pressure term of momentum equations in the numerical analysis. The numerical analysis were studied for the two model cases and two heat conditions, respectively, which are different with insulation of enclosures and position of heat applied. Also, the ceiling temperatures of enclosure were measured to compare the accuracy of numerical analysis, and it is found that the temperature predicted by numerical analysis were agreed well with the measurements. Streamline and isotherm of the each model case were acquired for each time step.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.164-164
• /
• 2011

우리나라는 하상의 평균경사가 급하고 하상계수가 크게 나타나며, 소하천에서의 돌발홍수가 빈발하게 일어나 국내 실정에 적합한 하천 해석 기술을 이용한 바람직한 하천 거동해석이 매우 중요하다고 할 수 있다. 홍수 시 하천의 만곡부나 협착부에서의 흐름은 기본적으로 2차원 흐름으로 서 이 경우 하천 흐름의 수위와 유속 분포는 1차원 하천 모형으로 모의할 수 없다. 특히 우리나라와 같이 하천에 하구둑, 보, 기타 하천 구조물이 많은 경우에는 2차원적인 흐름 해석은 경우에 따라 필수적이다. 본 연구에서는 개발모형인 RAM2 모형을 4대강 살리기 사업이 진행되고 있는 실제유역인 낙동강유역에 적용하여 모형의 적용성을 검증을 위해 그 결과를 실측치와 기존의 법용 프로그램인 RMA-2 모형과 비교하여 모형의 적용성을 입증하였다. 또한 보와 교각과 같은 수공구조물의 설치에 따른 하천흐름의 양상을 파악하기 위하여 RAM2 모형을 달성보 구간에 적용하여 보의 설치 전 후에 대하여 모의를 실시함으로써 모형의 적용성을 입증하였다. 본 연구에 적용된 달성보 구간은 낙동강 살리기 22공구 사업구간으로 중심부에 다기능보가 위치하고 있다. 하천 준설 후, 대상구간 내 보를 설치함으로 인하여 보설치 전 후의 대상구간의 상 하류 하도의 홍수위와 유속분포 등 하천흐름의 양상을 검토하였다. 4대강 살리기 사업에 따라 실제하천의 준설 후 구간내의 전체하도 및 주요 시설물 주위의 하천 흐름을 정확하게 재현하기 위하여 요소망을 조밀하게 구성하고, 안정적인 해를 구하기 위하여 사각형과 삼각형의 복합망으로 낙동강하천정비계획의 측량자료와 GIS프로그램과 SMS를 이용하여 수치모형을 위한 2차원 유한요소망을 구성하였다. 본 연구에서는 보설치 전 후의 대상구간의 상 하류의 홍수위 영향과 유속분포 등 하천흐름의 양상을 연구하기 위하여 대상구간에 대하여 100년 빈도, 500년 빈도의 홍수사상에 대하여 모의를 실시하고 결과를 분석하였다. 하천에서의 흐름, 유사, 오염물 해석을 위한 2차원 유한요소모형은 수자원의 지속적 확보기술의 초석이 될 뿐만 아니라, 필요에 따라서는 하천생태계 보존 및 관리를 위해서도 적용될 수 있어, 수생태계 개선과 친수환경 조성에 크게 기여할 수 있겠다. 또한 하천에서의 흐름, 유사, 오염물 해석을 위한 2차원 유한요소모형을 활용하여 적절한 하천개발 및 관리가 이루어질 경우, 하천의 홍수, 갈수, 환경오염에 따른 사회적인 손실을 방지할 수 있을 것이다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.1
• /
• pp.9-16
• /
• 2024

Using the proper orthogonal decomposition (POD) based intrusive reduced order model (ROM), the total degrees of freedom of the structural system can be significantly reduced and the critical time step satisfying the conditional stability increases in the explicit time integrations. In this study, therefore, the changes in the critical time step in the explicit time integrations are investigated using both the POD-ROM and Voronoi-cell lattice model (VCLM). The snapshot matrix is composed of the data from the structural response under the arbitrary dynamic loads such as seismic excitation, from which the POD-ROM is constructed and the predictive capability is validated. The simulated results show that the significant reduction in the computational time can be achieved using the POD-ROM with sufficiently ensuring the numerical accuracy in the seismic analyses. In addition, the validations show that the POD based intrusive ROM is compatible with the Voronoi-cell lattice based explicit dynamic analyses. In the future study, the research results will be utilized as an elemental technology for the developments of the real-time predictive models or monitoring system involving the high-fidelity simulations of structural dynamics.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.4
• /
• pp.49-60
• /
• 2024

Ground-penetrating radar (GPR) enables rapid data acquisition over extensive areas, but interpreting the obtained data requires specialized knowledge. Numerous studies have utilized numerical analysis methods to examine GPR signal characteristics under various conditions. To develop more realistic numerical models, the heterogeneous nature of the ground, which causes clutter, must be considered. Clutter refers to signals reflected by objects other than the target. The Peplinski material model and fractal techniques can simulate these heterogeneous characteristics, yet there is a shortage of research on the necessary input parameters. Moreover, methods for quantitatively evaluating the similarity between field and analytical data are not well established. In this study, we calculated the autocorrelation coefficient of field data and determined the correlation length using the autocorrelation function. The correlation length represented the temporal or spatial distance over which data exhibited similarity. By comparing the correlation length of field data with that of the numerical model incorporating fractal weights, we quantitatively evaluated a numerical model for heterogeneous ground. Consequently, the results of this study demonstrated a numerical modeling technique that reflected the clutter characteristics of the field through correlation length.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.4
• /
• pp.368-376
• /
• 1999

This paper studies the operational characteristics of thyristor controlled shunt compensator in a simple power t transmission system. With Fourier series representation of the thyristor switching action and the system parameters, t the thyristor current equations are derived, which transmit the required real power of the simple power transmission s system. Bisection algorithm is used to solve the thyristor current equations, which informs the thyristor firing an밍e, t the thyristor conduction an밍e, the power flows and the harmonic characteristics. The stability analysis is performed w with the theory of Poincare mapping for the nonlinear discrete periodic dynamic system. EMTP simulations at the v various operating points show the transient characteristics of the thyristor controlled shunt compensator and C correspond to the results calculated with Fourier series representation and the stability analysis.

• Computational Structural Engineering
• /
• v.3 no.3
• /
• pp.141-146
• /
• 1990

This study is on a seismic analysis of absorber rod in KMRR Reactivity Control Mechanism. The model being studied is two coaxial tubes(control absorber rod and flow tube) immersed in the water and partially coupled(overlap) by water gap. The hydrodynamic mass effects by the water in each surrounding conditions are considered in the model. The natural frequencies, stresses and displacements of the system due to Safe Shutdown Earthquake are computed in the cases of in-phase modes and out-of-phase modes of two coaxial tubes. The results show that maximum stresses are well below the allowable limit but the maximum displacements at the ends of both tubes are so much that the absorber rod contacts with the flow tube(or surrounding wall).

• Water for future
• /
• v.28 no.6
• /
• pp.119-131
• /
• 1995

Two-dimensional diffusion and kinematic hydrodynamic models have been studied for preparing the flood inundation map. The models have been tested by applying to one-dimensional dam-break problem. The results have good agreements compared with those of dynamic wave model. The diffusion wave model produces the mass conservation error close to zero. Floodwave analyses for two-dimensional floodplain with obstruction and channel-floodplain show both stable and efficient results. The model presented in this study can be used for flood inundation map and flood warning system.