• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.395-395
• /
• 2020

연안 지역의 침수 모의에 관한 국내 연구들은 간단한 월파량 공식 및 조위와 강우만을 결합하여 모의하였거나, 강우 없이 조위와 월파만을 고려하여 모의한 경우가 대부분이었다. 그렇지만 연안 지역의 침수는 강우와 (조위 포함) 월파가 시간에 따라 변하면서 발생하므로, 두 외력조건을 고려하는 침수 모의가 필요하다. 이에 본 연구에서는 연안지역의 침수 분석 시 강우-유출 분석과 2차원 지표면 침수 해석이 가능한 XP-SWMM을 이용하여 강우와 월파의 시간 변화를 고려한 침수 모의 방법론을 제시하고자 한다. 우선 FLOW-3D 모형을 사용하여 연안 지역의 흐름 분석과 월파량 시계열을 산정하였고, XP-SWMM에 산정된 월파량 시계열을 입력하기 위해 해안가 지역에 절점을 생성하였다. 절점의 위치는 FLOW-3D 모형에서 월파량 시계열을 산정한 격자의 중심 위치이다. 월파량 시계열 산정 시 FLOW-3D 모형의 격자를 XP-SWMM에서 모두 고려하기에는 많은 시간이 소요되므로 3개의 격자를 묶어 하나의 절점으로 구현하였고, 3개의 격자에서 산정된 월파량 시계열의 합을 해당 절점에 반영하여 XP-SWMM으로 침수 모의를 진행하였다. 제시된 방법의 적절성을 검토하기 위해 강우와 월파가 동시에 발생한 태풍 차바 내습 시 부산에 위치한 마린시티에 적용하였다. 분석 결과, 한국국토정보공사에서 제공하는 침수흔적도와 모의 결과가 유사함을 확인하였다. 본 연구는 연안 지역의 침수 해석 시 XP-SWMM으로 강우와 함께 월파를 고려한 침수 모의 방법을 제시한 연구 사례로서 의의가 있다. 이는 XP-SWMM의 범용성과 호환성을 높이는 방법론이며, 실제 침수 현상과 가깝게 재현할 수 있다고 판단된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.3
• /
• pp.291-302
• /
• 2005

Due to the importance of the parameter in structural response, the uncertain elastic modulus was located at the center of stochastic analysis, where the response variability caused by the uncertain system parameters is pursued. However when we analyze the so-called stochastic systems, as many parameters as possible must be included in the analysis if we want to obtain the response variability that can reach a true one, even in an approximate sense. In this paper, a formulation to determine the statistical behavior of in-plane structures due to multiple uncertain material parameters, i.e., elastic modulus and Poisson's ratio, is suggested. To this end, the polynomial expansion on the coefficients of constitutive matrix is employed. In constructing the modified auto-and cross-correlation functions, use is made of the general equation for n-th moment. For the computational purpose, the infinite series of stochastic sub-stiffness matrices is truncated preserving required accuracy. To demons4rate the validity of the proposed formulation, an exemplary example is analyzed and the results are compared with those obtained by means of classical Monte Carlo simulation, which is based on the local averaging scheme.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2030-2037
• /
• 2012

The purpose of this research is to suggest a model or method of needs analysis for designing syllabuses. As the learner-centered approach in teaching and learning methods becomes general, the learners' needs or wants should be reflected on the syllabus design. However, standardized scores in the previous research have disadvantages to be distorted in data interpretations because the difference between the maximum value and minimum value is so big compared to the Likert 5 scales. To solve this disadvantage, the Max-Min method is used in the needs analysis for the syllabus design. So, the differences are presented. Needs analyses need to be selected variously according to situations. Thus, further researches are needed to develop several new methods as well as the Max-Min method or the standardized score method for the whole needs analyses.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.2
• /
• pp.149-156
• /
• 2011

In this paper, a methodology is proposed to improve the stress prediction of plates via Saint Venant's principle. According to Saint Venant's principle, the stress resultants can be used to describe linear elastic problems. Many engineering problems have been analyzed by Euler-Bernoulli beam(E-B) and/or Kirchhoff-Love(K-L) plate models. These models are asymptotically correct, and therefore, their accuracy is mathematically guaranteed for thin plates or slender beams. By post-processing their solutions, one can improve the stresses and displacements via Saint Venant's principle. The improved in-plane and out-of-plane displacements are obtained by adding the perturbed deflection and integrating the transverse shear strains. The perturbed deflection is calculated by applying the equivalence of stress resultants before and after post-processing(or Saint Venant's principle). Accuracy and efficiency of the proposed methodology is verified by comparing the solutions obtained with the elasticity solutions for orthotropic beams.

• Journal for History of Mathematics
• /
• v.18 no.4
• /
• pp.29-38
• /
• 2005

This Paper discusses the history of the conflicts between synthesis and analysis, from those in heuristic and logic development style in ancient Greek to those in projective geometric methods. The two methods, which originally displayed difference in heuristic, offer the base for the two fields of geometry, the analytic geometry and the synthetic geometry in the 18th century as they originated from the field of geometry. As to the 19th century, they even display antagonistic aspects derived by having other perspectives about the true nature of mathematic but finally lose the reason of conflict as the ancient times when the dialectical sublation of both had been proposed.

• Geotechnical Engineering
• /
• v.12 no.3
• /
• pp.165-173
• /
• 1996

본 기술 자료에서는 수압 터널에서 침투 수압을 고려한 터널 주위 암반의 응력 상태에 대한 수치 해석 방법, 해석 결과의 이용에 대하여 실제 수압 터널의 예를 들어 소개한다. 수압 터널의 안전성은 터널 주위 암반의 안전성에 의해 좌우되며 암반의 안전성은 Mohr-Coulomb의 파괴론을 사용하여 암반의 응력에 대한 안전율을 산정하여 판단한다. 산정된 암반의 안전율과 실제 수압 터널의 거동을 비교하여 수치 해석의 적정성을 판단하며 수압 터널의 보강 방법을 제안한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.15-23
• /
• 2021

In this paper, service life for RC(Reinforced Concrete) substructure subjective to carbonation was evaluated through deterministic and probabilistic method considering field investigation data and Design Code(KDS 14 20 40). Furthermore changes in service life with increasing COV(Coefficient of Variation) and equivalent safety index meeting the same service life were studied. From the investigation, the mean and its COV of cover depth were evaluated to 70.0 ~ 90.0 mm and 0.2, respectively. With intended failure probability of 10.0 % and 70 mm of cover depth, service life decreased to 137 years, 123 years, and 91 years with increasing COV of 0.05, 0.1, and 0.2, respectively. In the case of 80 mm of cover depth, it changes to 179 years, 161 years, and 120 years with increasing COV. The equivalent safety index meeting the same service life from deterministic method showed 1.66 ~ 3.43 for 70 mm of cover depth and 1.61 ~ 3.24 for 80 mm of cover depth, respectively. The various design parameters covering local environment and quality condition in deterministic method yields a considerable difference of service life, so that determination of design parameters are required for exposure conditions and parameter variation.

• Journal of KIISE:Software and Applications
• /
• v.37 no.2
• /
• pp.148-154
• /
• 2010

In the study of the formal semantics of uncertain databases, we typically take an algebraic approach by mapping an uncertain database to possible worlds which are a set of relational databases. In this paper, we present a new semantics for uncertain databases which takes a logical approach by translating uncertain databases into logical theories. A characteristic feature of our semantics is that it uses linear logic, instead of propositional logic, as its logical foundation. Linear logic is suitable for a logical interpretation of uncertain information because unlike propositional logic, it treats logical formulae not as persistent facts but as consumable resources. As the main result, we show that our semantics is faithful to the operational account of uncertain databases in the algebraic approach.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.8
• /
• pp.111-123
• /
• 2008

Geotechnical engineering problems are characterized by many sources of uncertainty. Some of these sources are connected to the uncertainties of soil properties involved in the analysis. In this paper, a numerical procedure for a probabilistic analysis that considers the spatial variability of soil properties is presented to study the response of spatially random soil. The approach integrates a commercial finite difference method and random field theory into the framework of a probabilistic analysis. Two-dimensional non-Gaussian random fields are generated based on a Karhunen-$Lo{\grave{e}}ve$ expansion in a fashion consistent with a specified marginal distribution function and an autocorrelation function. A Monte Carlo simulation is then used to determine the statistical response based on the random fields. A series of analyses were performed to study the effects of uncertainty due to the spatial heterogeneity on the settlement and bearing capacity of a rough strip footing. The simulations provide insight into the application of uncertainty treatment to the geotechnical problem and show the importance of the spatial variability of soil properties with regard to the outcome of a probabilistic assessment.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.32-37
• /
• 1997

최적 노심장전모형을 찾기 위한 확률론적 방법중 하나인 Simulated Annealing 방법은 기존 결정론적 방법의 단점인 국부 최적해에 빠질 위험성을 줄이면서도 빠른 시간 안에 최적 노심장전 모형을 찾을 수 있다. 그러나 많은 장전모형의 핵특성을 계산하기 위해서는 많은 전산시간이 소요되기 때문에 이의 해결 방법으로 신경망이론 이용한 노심해석을 통하여 시간을 극소화하고, 기존의 섭동이론 등 가속화된 방법에 비해 정확도를 높였다. 영광 3호기 평형노심에 적용한 결과 기존 설계된 장전모형에 비하에 더 보수적인 제한치를 만족하면서도 주기길이가 33EFPD 만큼 길어지는 장전모형을 1시간 이내에 찾을 수 있어 기존의 결정론적 방법이나 다른 핵특성 계산 모델을 사용한 SA법에 비해 더 적은 전산시간 동안 정확한 최적해를 탐색하는 것을 확인하였다.