• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.85-91
• /
• 2012

In this paper, we implemented a Ka-band frequency synthesizer for millimeter wave seeker. we designed for high frequency resolution and frequency hopping response time in the digital synthesis method which uses DDS(Direct Digital Synthesizer). but frequency bandwidth was limited low frequency because DDS output frequency was limited 1/2 by system clock. thus, frequency synthesizer was converted to Ka-band using the frequency multiplier ${\times}4$ and local oscillator. proposed frequency synthesizer was bandwidth 500MHz, frequency switching time was $0.7{\mu}s$, spurious level was suppressed below -52dBc. phase noise was -99dBc/Hz at offset 100kHz and flatness was ${\pm}1dB$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.77-83
• /
• 2020

The technologies of 3D spatial information, such as Smart City and Digital Twins, are developing rapidly for managing land and solving urban problems scientifically. In this construction of 3D spatial information, an object using aerial photo images is built as a digital DB. Realistically, the task of extracting a texturing image, which is an actual image of the object wall, and attaching an image to the object wall are important. On the other hand, occluded areas occur in the texturing image. In this study, the ResNet algorithm in deep learning technologies was tested to solve these problems. A dataset was constructed, and the street tree was detected using the ResNet algorithm. The ability of the ResNet algorithm to detect the street tree was dependent on the brightness of the image. The ResNet algorithm can detect the street tree in an image with side and inclination angles.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.187-191
• /
• 2007

This paper describes a 3.3V 10 bit CMOS digital-to-analog converter with a divided architecture of a 7 MSB and a 3 LSB, which uses an optimal Thermal-to-Binary Decoding method with monotonicity, glitch energy. The output stage utilizes here implements a return-to-zero circuit to obtain the dynamic performance. Most of D/A converters in decoding circuit is complicated, occupies a large chip area. For these problems, this paper describes a D/A converter using an optimal Thermal-to-Binary Decoding method. the designed D/A converter using the CMOS n-well $0.35{\mu}m$ process0. The experimental data shows that the rise/fall time, settling time, and INL/DNL are 1.90ns/2.0ns, 12.79ns, and a less than ${\pm}2.5/{\pm}0.7$ LSB, respectively. The power dissipation of the D/A converter with a single power supply of 3.3V is about 250mW.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.127-136
• /
• 2008

A digitized image passes by encoding, storing or transmitting to show it to users. In this process, may be users would want to see a specific region of the image. And depending on the system features or in the case that the resolution of the image is large, it will take a huge time that the image show to the users. In this time, it will be resonable that the part users want to see shows earlier and afterward the other parts show. For this, JPEG2000 standards provide ROI. Although ROI extraction that users specify ROI arbitrarily is the best, people not always participate in doing all the images. There needs an automatic ROI extracting and storing in some images. JPEG2000 should extract and send an ROI automatically when the images is encoded without ROI. This study proposes a method that automatically extracts an ROI, makes the ROI masks, transfers the masked image preferentially and the background. And the study compares and experiments the proposed method and the method not having ROI.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.706-713
• /
• 2019

In this study, basic research was conducted to provide guidelines for selecting printers and materials suitable for each application case by analyzing 3D printing method and surface characteristics of materials suitable for microfluidic system. We have studied the surface characteristics according to the materials for the two typical printing methods: The most commonly used method of Fused Deposition Modeling (FDM) printing and the relatively high resolution method of Stereolithography (SLA) printing. The FDM prints exhibited hydrophilic properties before post - treatment, regardless of the material, but showed hydrophobic properties after post - treatment with acetone vapor. It was confirmed by the observation of surface roughness using SEM that the change of the contact angle was due to the removal of the surface structure by post-treatment. SLA prints exhibited hydrophilic properties compared to FDM prints, but they were experimentally confirmed to be capable of surface modification using hydrophobic coatings. It was confirmed that it is impossible to make a transparent specimen in the FDM method. However, sufficient transparency is secured in the case of the SLA method. It is also confirmed that the electroporation chip of the digital electroporation system based on the droplet contact charging phenomenon was fabricated by the SLA method and the direct application to the microfluidic system by demonstrating the electroporation successfully.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.12
• /
• pp.97-107
• /
• 2009

Television News has significant impact on the information analysis of viewers by delivering world news to anonymous individuals everyday. We need to pay more attention to resolution considering the fact that even slight facial expression and the dress of TV anchor can be noticed by viewers in the high definition age, called HD TV, by radical changes in broadcasting situation. As a result, the beauty of expression that lighting technology has is extremely important in the high definition age. In news broadcast, as a phenomenon according to this change in trend, people have been looking for change in order to break with traditional TV news production by adopting DLP(Digital Lighting Processing) or LED(Light Emitting Diode). This effort has contributed to creating proper picture quality appropriate for HD TV. Nowadays Digital imaging is creating new trend in TV news production method from traditional analog-based lighting environment thanks to the development of IT(Information Technology) and digitalized lighting equipment. This change has led to building of HD studio and appropriate sets and lighting system. There are film set and projector which projects image on the screen and PDP, LCD, and DLP which has been used widely in recent years and LED which is often used as background in news program as examples, which has appeared since 1990s with HD TV. In this article, I analyzed the KBS News 9 lnce 1990s with in order to research the influence of television image component on the alyzed the KBS of TV article, I. I wille uggest the category of TV anchor image formulation in delivering information by means of lnce 1990s with based on the analysis result.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1135-1144
• /
• 2023

Many agricultural reservoirs in South Korea, constructed before 1970, have become aging facilities. The majority of small-scale reservoirs lack measurement systems to ascertain basic specifications and water levels, classifying them as unmeasured reservoirs. Furthermore, continuous sedimentation within the reservoirs and industrial development-induced water quality deterioration lead to reduced water supply capacity and changes in reservoir morphology. This study utilized Light Detection And Ranging (LiDAR) sensors, which provide elevation information and allow for the characterization of surface features, to construct high-resolution Digital Surface Model (DSM) and Digital Elevation Model (DEM) data of reservoir facilities. Additionally, bathymetric measurements based on multibeam echosounders were conducted to propose an updated approach for determining reservoir capacity. Drone-based LiDAR was employed to generate DSM and DEM data with a spatial resolution of 50 cm, enabling the display of elevations of hydraulic structures, such as embankments, spillways, and intake channels. Furthermore, using drone-based hyperspectral imagery, Normalized Difference Vegetation Index (NDVI) and Normalized Difference Water Index (NDWI) were calculated to detect water bodies and verify differences from existing reservoir boundaries. The constructed high-resolution DEM data were integrated with bathymetric measurements to create underwater contour maps, which were used to generate a Triangulated Irregular Network (TIN). The TIN was utilized to calculate the inundation area and volume of the reservoir, yielding results highly consistent with basic specifications. Considering areas that were not surveyed due to underwater vegetation, it is anticipated that this data will be valuable for future updates of reservoir capacity information.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.345-351
• /
• 2019

Recently, ink-jet printing technology has been applied for various industries such as semiconductor, display, ceramic tile decoration. Ink-jet printing has advantages of high resolution patterning, fast printing speed, high ink efficiency and many attempts have been made to apply functional materials with excellent physical and chemical properties for the ink-jet printing process. Due to these advantages, research scope of ink-jet printing is expanding from conventional two-dimensional printing to three-dimensional printing. In order to expand the application of ink-jet printing, it is necessary to optimize the rheological properties of the ink and the interaction with the substrate. In this study, photo curable ceramic complex ink containing nano silica particles were synthesized and its printability was characterized. Contact angle of the photo curable silica ink were modified by control of the ink composition and the surface property of the substrate. Effects of contact angle on printing resolution and three-dimensional printability were investigated in detail.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.146-156
• /
• 2018

The ship's chart system was changed from the use of paper chart to the ENC (Electronic Navigational Chart) using ECDIS (Electronic Chart Display and Information System). The introduction of ENC in ships is necessary for ship automation and for the digitalizing of data and integration of information, but unexpected various problems have occurred and are posing a great threat to safe navigation in the transitional period when the new system has been applied to the sea. In this paper, to assess whether ECDIS contributes to the safety of navigation for its intended purposes as new navigation equipment, a usability test of ECDIS was conducted on masters and crew who have used ECDIS on ocean-going vessels. The result was verified with a paired sample T-test, and it was significantly analyzed with the effectiveness of a simplified task; cost efficiency was decreased since ECDIS was used. By analyzing 'MSC.1/Circ.1503 ECDIS - Guidance for good practice', we found that the effects of the maintenance of ECDIS software, operating anomalies identified within ECDIS, differences between raster chart display system (RCDS) and ECDIS, and matters of identification were compounded by the overlapping information on the safety of ships. The anomalies were also grouped according to their characteristics, and we proposed suitable improvements accordingly. The reason for the reduction in efficiency in the usability test was that the problems with ECDIS were intended to be solved only with the careful use of navigational officers who did not have systematic solutions. To solve these problems, the maintenance of software, the improvement of ECDIS anomalies, the reliable ENC issuance including the global oceans, and S-mode development are a priority.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.2
• /
• pp.111-118
• /
• 2005

The optotypes widely used as a necessity in the course of optometry are the world authorized versions which contain items such as the Landolt's rings, Snellen's chart and also Arabian numbers, Korean letters, Pictures and so on. In Korea, the Hahn-chun-suk test chart has been In use generally alolng with Chung-san test chart and Jin-yong-han test chart also in use on the wall. But these sort of test charts hung on the wall have some problems such as the difference in test results owing to the rate of illumination and so a more accurate method is required. To solve the problem of inaccuracy in optometry, the projected type of charts with digital instrument such as the beam projector has been developed lately. This chart projector with consistent high resolution and the ability to provide various charts can help eye examiner perform effective examination and thus is looked positively upon as the automated total optometry system. So in this study our purpose is to examine the accuracy of the projected chart. It was done by comparing it with the frequently used test chart. The results of experiment are as follow. When the projected chart was used, cases that subject read charts one step higher were 10%, two step higher 2% than perfectly corrected vision. When Han-chun-suk test chart was used, cases that subject read charts one step higher were 12%, and two step higher were 4%.