• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.967-977
• /
• 2018

The problems of lack of skilled worker and poor productivity at the construction site continue to be raised, and the introduction of construction automation as one of the solutions to this has been considered. The development of various types of equipment and systems has been carried out, especially for earthwork operations with multiple construction equipment. However, the level of commercialization of developed equipment or systems is very limited. Although the single-product type of earthwork equipment has been applied to the site, the integrated type of earthwork system is still in the field testing stage. Considering these constraints, the limited budget and research period, a strategy is needed to identify which technology areas and core technologies should be developed first. In this study, the technology areas and detailed core technologies that are essential for the development of earthwork systems at the level of commercialization are set and the priority of development is determined. In addition, the earthwork system that has been developed so far is analyzed and the detailed development direction is presented based on it. The findings can be used for a decision making to set the priority for core technologies that should be developed first in the limited budget and period.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.299-305
• /
• 2019

As the damage factors of the three­storey stone pagoda of the Bulguksa Temple in Gyeongju could cause a reduction in the historical and artistic value and accelerate the deterioration of the stone, an appropriate solution is needed. The aim of stone conservation is to conserve the original shape and convey originality from the ancestors to their descendants. This procedure includes a record of the condition, being available in the future. In particular, the damage assessment could be used in conservational research, educational data, conservational treatment, and preventive data. As a result of quantitative damage assessment, biological damage indicated 159 %, chemical damage 114 %, and physical damage 16 %. The west direction revealed 95 % because of the amount of sunshine, moisture, and expansion of rock. Complex factors and high range damage were observed on the foundation and body of the pagoda. Since the top of pagoda was restored in the 1970s, the state presented a good condition. By doing this, the number of organisms could be reduced by cleaning and the physical damage could be minimized by bonding. On the other hand, continuous monitoring will be needed because there is a possibility of reforming the damage in the future.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.2
• /
• pp.96-109
• /
• 2015

The Dresden Elbe Valley of Germany was delisted from the World Heritage List after a long dispute amongst the city of Dresden, UNESCO and the World Heritage Committee upon a plan to build a four-lane bridge within the boundaries of the property. The plan was claimed to threaten the Outstanding Universal Value of the heritage embedded in the view of the river landscape. However looking back on the necessity of the bridge in order to maintain the city dynamics and the needs of the local population, it is possible to diagnose that plans for the bridge had a rather different nature from the usual urban 'development' plans appearing in the vicinity of other World Heritage properties. This article examines the process that led to the delisting of the Elbe Valley from the World Heritage List and assesses the problems arising between the entities which determine the value of the heritage and the entities that implement conservation measures. Recognizing the necessity of involving the local residents, this article stresses the importance of the role of communities in heritage conservation. It is also important to set up dependable directions for establishing conservation policies which takes into account the changing dynamics of the living environment, and sound methods for assessing the impact of future projects on the heritage.

• Journal of the Korean Society for information Management
• /
• v.36 no.3
• /
• pp.109-129
• /
• 2019

Since the recent financial crisis in universities has caused the decrease of academic library budget, the resource sharing has been considered by utilizing inter-library loan (ILL) data for solving the financial deficit. This study aims to identify the collection profiles of western monographs' ILL data among 4-year academic libraries. In order to achieve the purpose of this study, this study analyzes ILL data from 2011 to 2017 using the bibliographic data and ILL transactions of the KERIS union catalog. The findings of the study show that the western monographs was significantly provided by large-scale academic libraries in 2011, however, the extent of major regions expanded, and the number of influential institutions rose in 2016. Second, in 2012, the influence in the ILL network increased in the quantity of western monographs holdings and the proportion of common collections. On the other hand, in 2016, it was also shown that the influence in terms of provision in the ILL network increased in the proportion of unique collections. Lastly, the ILL participating academic libraries were classified into six clusters by a hierarchical clustering analysis of holdings and ILL indexes.

• Journal of Life Science
• /
• v.29 no.8
• /
• pp.922-940
• /
• 2019

Obesity, represented by abnormal fat accumulation due to an imbalance between energy intake and expenditure, is a major public health issue worldwide, leading to multiple noncommunicable diseases, including atherosclerosis, hypertension, type 2 diabetes, and cancer. Diverse solutions have been proposed to combat obesity. Attention has focused on two types of adipose tissues as a promising therapeutic target in obesity: traditional brown and beige or brite. Unlike energy-storing white adipose (endocrine) tissue, traditional brown adipose tissue and beige adipose tissue have energy-dissipating thermogenic properties. Both types of tissue are present in adult humans and inducible through external stimuli, such as cold exposure, ${\beta}3$-adrenergic receptor agonists, and phytochemicals. Among these stimuli, microbiota present in the human intestinal tract participate in multiple metabolic activities. Modulation of gut microbiota may offer a potent and possibly curative strategy against various metabolic diseases. Numerous studies have focused on the effects of established antiobesity treatments on the gut microenvironment or brown-adipose-tissue activation. In this review, we focus mainly on stimuli known to alleviate obesity, weight gain, and metabolic diseases, in addition to known and possible inter-relations between gut microbiota modulation and similar interventions and adipose tissue browning. The findings may pave the way toward new strategies against obesity.

• Convergence Security Journal
• /
• v.17 no.5
• /
• pp.63-69
• /
• 2017

In the early 1990s, IETF(Internet Engineering TaskForce) had started the discussion on new address protocol that can modify and supplement various drawbacks of existing IPv4 address protocol with the introduction of CIDR(Classless Inter-Domain Routing) which is a temporary solution for IPv4 address depletion, NAT, private IP address. While various standards related to new address protocol has been proposed, the SIPP(Simple Internet Protocol Plus) was adopted among them because it is regarded as the most promising solution. And this protocol has been developed into current IPv6. The new concepts are introduced with modifying a lot of deficiencies in the exisitng IPv4 such as real-time data processing, performance on QoS, security and the efficiency of routing. Since many security threats in IPv6 environment still exist, the necessity of stable data communication environment has been brought up continuously. This paper deveopled one-way communication algorithm in IPv6 based on the high possibility of protecting the system from uncertain and potential risk factors if the data is transmitted in one way. After the analysis of existing IPv6 and ICMPv6, this paper suggests one-way communication algorithm as a solution for existing IPv6 and ICMPv6 environment.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.81-91
• /
• 2019

Recently, the nation has been suffering from a variety of problems, such as the rapid aging of the population and the weakening of the family's role due to rapid industrialization, such as the problem of supporting the elderly or the decline in the quality of supporting them. Among them, the issue of supporting the sentiment of the elderly is a major issue in terms of the quality of the stimulus. The best solution would be to resolve this issue of emotional support through various physical and human support. However, due to various limitations, access to efficient utilization of resources is being sought, among which support efforts through the convergence of digital technologies need to be noted. In this study, we took note of the problems of aging population shortage due to aging phenomenon and the problems of the emotional side of the problem of declining quality of the service, and analyzed the types of digital technology applied to support the emotional side through the convergence of digital technology. Among them, the Commission proposed emotional support through smart speakers, confirming the possibility of supporting the elderly through smart speakers. In addition, the Commission proposed guidelines for smart speaker communication systems to support the sentiment of older adults by conducting an in-depth interview with the In-Depth interview with the evaluation of the usability of smart speakers for older people. Based on the results of this study, it is expected that it will be the basic data for designing a communication system when developing smart speakers to support the emotions of the elderly.

• The Korean Journal of Archival Studies
• /
• no.43
• /
• pp.43-70
• /
• 2015

The value and validity of elite oral materials have been questioned because of their gaps with 'fact'. The purpose of this article is to analyze these gaps and to propose some solutions that can reduce the gaps. According to the analysis of this article, there are three types of the gaps that qualitatively differ from each other. The first type of the gaps is produced in the process of generation of memory. This type is made because informants cognize and memorize the facts that exist outside themselves. Selective cognition, selective memory and individual experience come under this category. The second type is produced in the process of preserving the memory. Forgetting and memory transformation are main examples of this type. The third type is produced in the process of the interviews with the informants. False statements or lies fall into this category. The main conclusions are as follows. 1) all gaps in oral materials are not necessarily negative. It is because Some of these gaps- the first and the second type- are not only parts of the real world but also very useful for interpreting the world. 2) The third type of the gaps are very harmful and it is need to be eradicated or reduced. For this, this article proposes some solutions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.580-589
• /
• 2019

Indonesia has a very short supply of electricity. As a solution to this problem, plans for construction of thermal power plants are increasing. Thermal power plant require the cooling water system to cool the overheated engine and equipment that accompany power generation, and the circulation water pump chamber among the cooling water system are generally designed according to the ANSI (1998) standard. In this study, the design criterion $20^{\circ}$ for the spreading angle of the ANSI (1998) of the layout of the circulating water pump chamber can not be satisfied on the K-coal thermal power plant site condition in Indonesia. Therefore, 3-D numerical model experiment was carried out to obtain a hydraulically stable flow and stable structure. The Flow-3D model was used as numerical model. In order to examine the applicability of the Flow-3D model, the flow study results around the rectangular structure of Rodi (1997) and the numerical analysis results were compared around the rectangular structures. The longitudinal velocity distribution derived from numerical analysis show good agreement. In order to satisfy the design velocity in the circulating water pump chamber, a rectangular baffle favoring velocity reduction was applied. When the approach velocity into the circulating water pump chamber was occurred 1.5 m/s ~ 2.5 m/s, the angle of the separation flow on the baffle was occurred about $15^{\circ}{\sim}20^{\circ}$. By placing the baffle below the separation flow angle downstream, the design velocity of less than 0.5 m/s was satisfied at inlet bay.

• Membrane Journal
• /
• v.31 no.4
• /
• pp.253-261
• /
• 2021

Solutions to water pollution, global warming, and climate change have been currently discussed. Pressure retarded osmosis (PRO) using a difference in salt concentration between two fluids is proposed to meet the demand for clean water and produce eco-friendly energy. Although PRO has been researched continuously, it has not been commercialized yet due to limitations such as lack of technology and the high price of membranes. Meanwhile, the membrane is one of the most significant parts of the PRO engine and salinity gradient power (SGP) technology. Research continues to technologically develop graphene oxide membranes and nanocomposite membranes used in salinity gradient power generation. Studies on efficient membranes, solvents, and solutes are active to enable high energy efficiency of the osmotic heat engine even at low temperatures of waste. Studies have been conducted on reducing internal concentration polarization and increasing power density by using membranes with balanced permeability and selectivity. In this review, dealing with these studies, we discuss the types of PRO membranes, theoretical modeling of technologies through efficient membranes, and other technologies to develop the process efficiency.