• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.46-146
• /
• 2003

해양환경의 대표적 오염물질인 PAHs가 양식굴의 생리대사에 미치는 영향을 파악하고자, 서로 다른 PAHs 농도에 노출된 굴의 여수율, 호흡율, 배설율 및 동화율의 변화를 조사하였다. 부착생물을 깨끗하게 제거한 굴을 실험실로 옮겨 3일정도 순치시키고, 이후 각각의 0, 50, 100, 200ppb의 농도별로 약 10일간 미리 노출시켰다. 이후 각 개체별로 2L 들이 2$0^{\circ}C$항온수조에서 0.2$\mu\textrm{m}$ 여과해수를 사용하여 실험하였다. 여수율은 Chaetoceros simplex를 지표생물로 하여 수조내 시간당 감소율을 구하여 Kim(1995)의 식에 의해 구하였다. 호흡율은 유동파라핀으로 외부와의 공기접촉을 단절시키고, 수조내 단위시간당 DO meter로 산소변화를 측정하여 Widdows and Johnson(1988)의 식을 변형하여 계산하였다. 배설율은 단위시간동안 수조내 NH$_4$-N 농도 증가량으로 조사하였고, NH$_4$-N은 HACH Inc.에서 제공하는 측정법을 따랐다. 여수율은 500ppb에서 다소 영향을 받아 증가하였다. 호흡율과 배설율은 노출농도가 증가함에 따라 증가하였지만, 50ppb와 100ppb에서는 다소 차이가 없었다. 따라서 양식굴이 PAHs와 같은 오염물질에 노출되었을 경우, 초기에는 여수율의 변화는 없고 배설율과 호흡율이 상승하여 체내 에너지 요구량이 증가하는 것으로 생각된다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1123-1126
• /
• 2010

본 연구에서는 외기온습도에 따른 히트펌프 칠러의 난방성능을 조사하고자 하였다. 난방표준 온도조건에서 건구온도 및 습구온도 변화에 따른 히트펌프 칠러의 난방능력과 COP를 획득하기 위하여 항온항습 챔버와 항온수조를 사용하였다. 실험은 건구온도 $7^{\circ}C{\sim}17^{\circ}C$, 상대습도 67%~87%에서 수행하였다. 외기온도가 증가함에 따라 난방능력은 약 27%, COP는 약 28% 증가하였지만, 상대습도 증가에 따른 난방능력과 COP의 변화는 거의 없었다. 따라서 난방운전 시 건구온도의 영향은 크고, 상대습도의 영향은 미미함을 알 수 있었다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1141-1144
• /
• 2010

본 연구에서는 난방운전시 저온 및 착상 조건에서 히트펌프 칠러의 성능을 조사하고자 하였다. 실험은 항온항습 기능을 가진 공기엔탈피 방식의 칼로리미터와 항온수조를 사용하여 수행되었으며, 실외온도조건을 설정한 후에 히트펌프 칠러의 성능을 실험으로 측정하였다. 외기조건이 $-7^{\circ}C$에서 $-15^{\circ}C$까지 변화함에 따라 시스템의 성능과 COP는 표준온도 조건의 실험값 보다 약 48~87%까지 감소하였다. 착상 실험에서는 시간 변화에 따라 출구수온이 표준온도를 기준으로 74% 감소하였다. 본 연구로부터 히트펌프 칠러의 설계 기초자료 획득 및 신뢰성을 확인할 수 있었다.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.14 no.4
• /
• pp.27-34
• /
• 2018

This study compared constant water bath performances of conventional water-cooled refrigerator and electric heater with an air-cooled VRF chiller and electric heater equipped with optimal control algorithm. In heating mode, the air cooled VRF chiller and electric heater combination reduced the set temperature arrival time by an average of 42 minutes, and energy was also reduced by 18%. In cooling mode, the two systems took 70 minutes to reach the set temperature and showed no difference. Energy was reduced by 33.5% with the new system. For constant temperature maintaining experiment, after reaching the set temperature of $15^{\circ}C$, $20^{\circ}C$ and $22^{\circ}C$, temperature deviations were all in the range of $-0.2^{\circ}C$ to $+0.1^{\circ}C$. Energy was reduced by an average of 84.9%. Through this study, possibility of precise temperature control by an air cooled VRF chiller system was confirmed.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.118-118
• /
• 2003

홍조류 김속 해조 5종(모무늬돌김, 방사무늬김, 참김, 긴잎돌김, 잇바디돌김)의 사상체를 2단계 냉각법으로 액체질소 중에서 동결보존을 시행하였다. 시료를 여러 가지 동해보호제에 현탁시킨 후 프로그램 냉각기로 4시간에 걸쳐 -4$0^{\circ}C$까지 천천히 동결시켰다. 일차 완만동결 종결 후 즉시 동결용 튜브를 액체질소 중에 수용하여 급속동결 시켰다. 해동시에는 4$0^{\circ}C$의 항온수조에서 대부분의 얼음 결정을 급격히 해동시킨 후 냉각수내에서 완전히 해동시켰다. 생존률은 김 속 해조에서는 neutral red로 염색하여 산정하였으며 50% 해수에 10% DMSO와 0.5M sorbitol 혼합액을 동해보호제로 사용하였을 때의 생존율이 54.6~70.9%였다.

• Korean Journal of Veterinary Research
• /
• v.7 no.2
• /
• pp.8-12
• /
• 1967

Formalin 처리(處理) 면양적혈구(緬羊赤血球)를 용혈소(溶血素) 생산용(生産用) 항원(抗原)으로 가토(家兎)의 이정맥(耳靜脈)에 접종(接種)하였던바 고가(高價)의 양성혈청(陽性血淸)을 얻을수 있었음으로 보고(報告)하는 바이다. Formalin 0.5% 식염수(食鹽水)에 하룻밤동안 $37^{\circ}C$ 항온수조(恒溫水槽)에서 처리(處理)한 면양적혈구(緬羊赤血球)를 정유액(淨遊液) 1.0ml. 2.0ml. 3.0ml. 4.0ml.을 4일간격(日間隔)으로 4회(回) 가토(家兎)의 이정맥(耳靜脈)에 접종(接種)하였으며 최종항원접종후(最終抗原接種後) 5일(日)만에 채혈(採血)하므로서 10,000단위(單位) 이상(以上)의 용혈소력가(溶血素力價)를 갖는 가토혈청(家兎血淸)을 생산(生産)할 수 있었다. 이 방법(方法)에 의(依)하면 항원(抗原)의 제조(製造)나 면역방법(免疫方法)이 지금까지 알려져온 어떤 방법(方法)보다 더 간편(簡便)하며 가토(家兎)에 대(對)한 예민성(銳敏性) 반응(反應)이 거의 없으며 개체차이(個體差異)없이 용혈소(溶血素)를 생산(生産)하는 것이 특징이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1337-1342
• /
• 2007

An experimental study has been performed to investigate the performance and heat transfer characteristics of the heat exchanger for simultaneous cooling/heating heat pump. The heat transfer performance was measured using an air-enthalpy calorimeter and a constant temperature water bath, to obtain the performance evaluation and analysis of a fined tube heat exchanger. Six finned tube heat exchangers with louver fin were tested under a heating condition. Air-side heat transfer and friction were presented in terms of j-factor and f-factor. The heat transfer coefficient increased with decreasing the fin pitch, j-factor and f-factor on the fin pitch and the number of tube rows decreased with increasing Reair.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.599-604
• /
• 2008

An experimental study has been performed to investigate the air-side capacity and pressure drop of the fin-tube heat exchanger for a fan coil unit under a cooling condition. The experimental data of five kinds of slit fin-tube heat exchangers were measured using an air-enthalpy calorimeter and a constant temperature water bath. Cooling capacities at the air and water rating flow rates were larger at the lower inlet water temperature. With increasing the water flow rate, the cooling capacity increased at the constant rate. Under the lower inlet water temperature, since the condensate was generated more on the fin-tube surface, the air-side pressure drop of the heat exchanger was larger.

• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.174-180
• /
• 2011

This study was conducted to investigate the optimum condition of extraction from fronds of Osmunda japonica to increase antioxidant compounds and antioxidant activity. Powder (1 g) of lyophilized fronds were mixed with three different solvents (MeOH, 80% EtOH and water). Extraction was carried out using not only by immersion (room temp.), heating ($60^{\circ}C$) and stirring (200 rpm) for 6 h, but also by sonication in 42 kHz ultrasonic bath for 15, 30 and 45 min. Extracts were filtered, and adjusted up to 50 mL to determine contents of soluble solids, total polyphenols and total flavonoids. Antioxidant capacity was measured by radical scavenging activity of 0.15 mM DPPH (2,2-diphenyl-1-picrylhydrazyl) and 7.4 mM ABTS [2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)] radical. Among the solvents, MeOH and 80% EtOH appeared to be effective for extraction. Extract obtained from sonication in MeOH for 15 min resulted high polyphenol contents (45.15 $mg{\cdot}g^{-1}$ db) and DPPH radical scavenging activity ($RC_{50}$= 0.35 $mg{\cdot}mL^{-1}$). The highest flavonoid contents was obtained from immersion or heating extraction with MeOH (38.10~38.10 $mg{\cdot}g^{-1}$ db). ABTS radical scavenging was high in same extraction with 80% EtOH ($RC_{50}$= 0.21~0.22 $mg{\cdot}mL^{-1}$). Altogether, our results indicate that the extraction using ultrasonic bath with MeOH as a solvent (for 15~30 minutes) was the most effective way not only for increasing various antioxidant activities but also for saving labor and time in case of fronds of Osmunda japonica.

• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.113-120
• /
• 2020

Purpose: This study is to compare and analyze the shrinkage of the specimen after UV irradiation of UV cured resin at 5, 15, and 30 minutes. Methods: A cylindrical UV cured specimen was produced using a stainless steel mold. UV cured resin specimens were prepared in three groups: 5 minutes cured (5M), 15 minutes cured (15M), and 30 minutes cured (30M). The measurement was made in total 3rd. The measurement was made in total 3rd. The primary measurement was made after 24 hours using a digital measuring instrument. The 2nd and 3rd measurements were deposited in a constant temperature water bath and the shrinkage was measured. The measured data was calculated by referring to the ASTM C326 linear measurement calculation method. T-test and One-way ANOVA were performed to test the significance between groups. The post-test was conducted with Tukey (α=0.05). Results: When the inner diameter and the outer diameter of the three groups not placed in the water bath were compared and analyzed, the contraction was the smallest at 6.8% in the 5M group, and the contraction was the largest at 7.3% in the 30M group. In the outer diameter, the contraction of the 5M group was the smallest at 3.5%, and the contraction of the 30M group was the largest at 4.5%. Shrinkage decreased in all three groups immersed in a water bath for 3-7 days. Conclusion: In the UV cured resin specimen, the shrinkage increased as the amount of UV irradiation increased.