• Journal of Satellite, Information and Communications
• /
• v.2 no.1
• /
• pp.48-55
• /
• 2007

The system requirement definition, system configuration, major parameters for GNSS ground station development are presented in this paper. GNSS ground station system consists of the GNSS sensor station, up link station and monitoring & control system. The GNSS sensor station consists of navigation receiver subsystem which process the GPS and Galileo navigation signal, automic clock subsystem, meteorological data receiving subsystem and navigation data processing subsystem. To communicate the error correction of navigation fate, GNSS sensor station interface with GNSS Control Center.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.2
• /
• pp.10-15
• /
• 2011

본 논문은 위성항법신호감시국용 GPS/갈릴레오 복합수신기에 대한 구현 및 성능 시험결과를 기술한 논문으로 복합수신기는 단일 플랫폼에서 갈릴레오 E1, E5a 신호와 GPS L1, L2C, L5 신호를 수신처리 할 수 있으며, GPS신호와 갈릴레오 E1 신호를 복합적으로 처리함으로써, 위치정확도가 향상됨을 보였다. 각 신호에 대한 신호획득을 신속하게 하기 위해, 모든 신호에 대해 정합필터와 FFT 방식이 결합된 방식을 적용하였고, 신호추적과정에서는 다수의 추적루프를 적용하였으며 본 논문에서는 주요 신호에 대한 신호획득 및 추적과정의 시험결과를 보였다. 또한 기존에 발표된 논문과의 차별화 항목으로, 항법신호의 수신레벨이 낮아 CW 형태와 같은 간섭신호에도 영향을 받는바, 이에 대한 개발된 항재밍 모듈에 대한 시험결과도 제시하였으며, 성능측면에서의 비교를 위해 상용수신기와 개발된 수신기와의 성능 비교 결과도 함께 제시하였다.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2012

This research is performed to upgrade the performance and stabilize ther operation of GSS L1 receiver. One of the this research result is that the pre-development GSS receiver is amended to remove performance degradation factor so GSS L1 receiver performance enhancement is achieved. Other is that as a result of long run test, real environment test is performed and GSS L1 receiver operate under the GPS live signal receiving environment. Key result of this research is localization of GSS receiver.

• Electronics and Telecommunications Trends
• /
• v.23 no.4
• /
• pp.137-146
• /
• 2008

위성항법수신기는 항법위성(GPS)들이 현재 위치와 시간이 담긴 전파신호를 지상으로 송신하면, 이런 신호를 받아 전파가 도달하기까지 걸린 시간을 계산해 자신의 현재 위치를 파악하게 된다. 경도와 위도, 높이를 동시에 파악하기 위해서는 3개 위성신호가 요구되고, 위성간 시간 오차를 제거해 위치 측정의 정확도를 높이기 위한 신호용으로 또 하나의 위성이 필요해 4개 위성이 요구된다. 항법의 형태는 육표기반 항법, 천체기반 항법, 센서기반 항법, 무선기반 항법 및 위성기반 항법으로 분류되며 그 중 전역이고 간섭 영향 및 재밍(jamming)이 어려우며 정확도 측면에서 우수한 위성항법시스템에는 GPS(미국), GLONASS(러시아)가 운용중이고, Galileo(유럽연합), COMPASS(중국), QZSS(일본), IRNSS(인도)이 개발중이다. 위성항법시스템 다원화에 따라 위성항법 수신기 기술도 이중주파수처리 및 타 시스템과의 호환성 제공이 요구되는바, 본 논문에서는 위성항법 수신기 기술 동향을 소개하고자 한다.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.64-68
• /
• 2007

This paper describes the development of RF front.end equipment of a wide band high precision satellite navigation receiver to be able to receive the currently available GPS navigation signal and the GALILEO navigation signal to be developed in Europe in the near future. The wide band satellite navigation receiver with high precision performance is composed of L - band antenna, RF/IF converters for multi - band navigation signals, and high performance baseband processor. The L - band satellite navigation antenna is able to be received the signals in the range from 1.1 GHz to 1.6 GHz and from the navigation satellite positioned near the horizon. The navigation signal of GALILEO navigation satellite consists of L1, E5, and E6 band with signal bandwidth more than 20 MHz which is wider than GPS signal. Due to the wide band navigation signal, the IF frequency and signal processing speed should be increased. The RF/IF converter has been designed with the single stage downconversion structure, and the IF frequency of 140 MHz has been derived from considering the maximum signal bandwidth and the sampling frequency of 112 MHz to be used in ADC circuit. The final output of RF/IF converter is a digital IF signal which is generated from signal processing of the AD converter from the IF signal. The developed RF front - end has the C/N0 performance over 40dB - Hz for the - 130dBm input signal power and includes the automatic gain control circuits to provide the dynamic range over 40dB.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.196-197
• /
• 2011

신뢰성 있는 위성합법기반의 위치정보 서비스 제공을 위해서는 오차정보서비스와 항법신호의 이상을 감시하는 서비스가 요구된다. 항법신호 이상감시는 그동안 단일 기준국에 대한 연구 위주로 진행되어 왔다. 본 연구에서는 단일 기준국이 아닌 다중 기준국을 기반으로 한 항법신호 이상을 감시하기 위한 소프트웨어를 설계하고 구현하는데 그 목적이 있다. 다중 기준국을 기반으로 한 항법신호 이상감시 소프트웨어는 GPS 메시지를 효과적으로 수집하는 수집부와, 수집된 데이터를 이용하여 다중 기준국에서의 항법신호를 감시하기 위한 알고리즘 처리부로 나누어 소프트웨어의 효과적인 동작을 위해 모듈화를 진행하였으며, 시스템에 대한 안정성 및 확장성을 고려하여 설계하였다. 본 연구를 통하여 단일 기준국에서는 확인할 수 없는 항법신호 이상을 정밀하게 탐지할 수 있게 되었으며, 오차정보 서비스를 제공하는데 있어 기반자료로 활용될 수 있다.

• Journal of Satellite, Information and Communications
• /
• v.4 no.1
• /
• pp.36-44
• /
• 2009

The key technologies of GNSS receiver for GNSS sensor station are under development as a part of a GNSS ground station in ETRI. This paper presents the GNSS receiver implementation and signal processing result which is implemented based on FPGA to process the Galileo E1 and E5 signal. To verify the working and performance for GNSS receiver which is implemented based on FPGA, live signal received from GIOVE-B which is second test satellite is used. We gather GIOVE-B signal by using prototyping antenna and RF/IF units including IF-component. To verify Galileo E1 and E5 signal processing function from GIOVE-B, FPGA based signal processing module is implemented as a prototyping hardware board.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.608-615
• /
• 2008

Recently, research on GNSS signal receiver, aiding system and integrated navigation system approaching to the new satellite navigation system is needed. It it necessary to develop the GNSS simulator not only to understand the new satellite navigation system but also to develop the core technology about the system. In this paper, the simulator of the GPS and Galileo satellite nagivation is developed in IF(intermediate frequency) signal level.

• Journal of Satellite, Information and Communications
• /
• v.4 no.1
• /
• pp.8-13
• /
• 2009

Software-Based GNSS Simulation Tool is being developed by ETRI as a part of development of software-based GNSS Test & Evaluation Facility which will provide test and evaluation environment for various software level application and navigation algorithm in GNSS. The simulation tool will provide digitized GNSS signal generator and receiver including GPS and Galileo. The detailed design and module implementation for the Software GNSS signal generation and signal processing simulation tool and its modular implementation is presented in this paper.

• Journal of Satellite, Information and Communications
• /
• v.6 no.1
• /
• pp.80-85
• /
• 2011

In this paper, a software-based real-time GPS L1 receiver is proposed for the block correlation techniques. Recently various navigation satellite navigation receivers in the environment for the development of more efficient software-based real-time receiver need to be developed. It is composed of components such as signal supplier, signal acquisition, signal tracking, navigation data processing, and navigation solution. They are designed and implemented as component based software for enhancing reusability and modifiability for user to have more flexibility during development of receiver. This paper will describe design, implementation, and verification of the developed realtime software GNSS receiver.