• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.4
• /
• pp.28-38
• /
• 2011

This study analyzes the visual access opportunities of neighborhood park users using the Space Syntax theory. In order to achieve this goal, 27 neighborhood parks were selected and 27 axial maps drawn according to the spatial configuration of the sites. Based on the axial map data, this study has calculated some specific space syntax indices, including Connectivity, Integration, and Intelligibility using the Axwoman ver 3.0 based on the Arcview 3.2 application. The value of the representative indices were used to examine visual access opportunities presented by the parks. This study was conducted in two aspects: one focusing on the entire space and another focusing on only the main entrance of the parks. The former used integration and intelligibility values and the latter used connectivity and integration values to evaluate the visual access opportunities of the sites. As a result, this study found that some parks, including Joongang, Balsan, and Sangdang, have high visual access opportunities in terms of the spatial configuration surrounding the park, which shows an integration value higher than 2, and also having intelligibility values higher than 0.7. This is the result of the grid land use pattern surrounding the parks and the straight roads that are closely linked to the main entrances of the parks. It is expected that this methodology and results will be used for locating neighborhood parks during the urban planning stage as providing reasonable evidence.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.11
• /
• pp.914-921
• /
• 2017

The experimental research on a high-altitude environment simulation of space launch vehicle is important for securing independent technologies with launching space vehicles and completing missions. This study selected an altitude of 65 km for the experiment environment where it exceeded Mach number of 6 after the launch of Korean Space Launch Vehicle(KSLV-II). Shock tunnel was used to replicate the flight condition. After flow establishment, in order to confirm aerodynamic characteristics and normal and oblique shockwaves, the flow verification was carried out by measuring stagnation pressure and heat flux of a forebody model, and shockwave stand-off distance of a hemispherical model. In addition, a shock-free technique to recover free-stream condition has been developed and verified. From the results of the three verification tests, it was confirmed that the flow was replicated with the error of about ${\pm}3%$. The error between the slope angle of inclined shockwave of the scaled down transition section model using the shock-free shape and the slope angle of the horizontal plate model, and between the theoretical and the experimental value of the static pressure of the model were confirmed to be 2% and 1%, respectively. As a result, the efficiency of the shockwave cancellation technique has been verified.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.65-78
• /
• 2007

The pollutants (Rn, CH, CO, HS, radioactive gas from radiolysis) were generated from the process of construction and operation of underground repository, and after disposal of low-intermediate radioactive waste inside there must be controlled by a ventilation system to distribute them in area where enough air is supported. Therefore, a suitable technical approach is needed especially at an underground repository that is equipped with many entry tunnels, storage tunnels, exhaust-blowing tunnels, and vertical shafts in complicated network form. For the technical approach of such a ventilation system, WIPP (Waste Isolation Pilot Plant) in U. S and SFR (Slutforvar for Reaktorafall) low-intermediate radioactive waste repository in Sweden were selected as the models, for calculating the required air quantity, organizing a ventilation network considering cross section, length, surface roughness of the air passage, and describing a calculation of resistance of each circuit. Based on these procedures, a best suited ventilation system was completed with designing proper capacity of fans and operating plan of vertical shafts. As a result of comparing the two repositories based on the geometry dimensions and ventilation facility equipment operation, more parallel circuit as in WIPP, brought decrease in resistance for entire system leading to reduce of operating costs, and the larger cross-sectional area of the SFR, the greater the percentage of disposal capacity. Accordingly, the mixture of parallel circuit of WIPP repository for reducing resistance and SFR repository formation for enlargement of disposal capacity would be the most rational and efficient ventilation system.

• The Journal of Engineering Geology
• /
• v.18 no.1
• /
• pp.17-26
• /
• 2008

In this study, the design method of slope reinforced by the earth retention systems were systematically developed, and the flow chart of design procedure fur each system were constructed to design the slope rationally. The proposed design method is composed of 5 steps such as field condition investigation step, slope design step, landslide occurrence prediction step, slope failure scale estimation step and reinforcement countermeasure selection step. The quantitative standard of slope failure scale was established based on the arrangement of various overseas standards which is estimating the slope failure, and the analysis of slope failure scale which is occurred in the country. The slope failure scale is classified into three categories the small scale of slope failure is less than $150m^3$ of slope failure volume, the middle scale of slope failure is from $150m^3$ to $900m^3$ and the large scale of slope failure is more than $900m^3$. The earth retention system could be selected by the proposed slope failure scale based on the slope failure volume. Meanwhile, the design methods of earth retention system such as piles, soil nails and anchors were developed. The optimal countermeasure for slope stability could be proposed using above design methods.

• The Journal of Korean Society for Radiation Therapy
• /
• v.21 no.2
• /
• pp.57-65
• /
• 2009

Purpose: The purpose of this paper is to provide basic data in order to systemize the management of demand and supply of radiologic technicians, to pursue a fair regional distribution of educational institutions, and furthermore to keep reasonable medical treatment and fee. This research was carried out through the investigation of radiologic equipments and technicians according to the distribution of the population. Materials and Methods: We compared and analyzed the correlation between regional population, the number of clinics and hospitals, the number of medical imaging devices, and the number of radiologists and radiologic technicians in 5 cities without "Gu" administrative units in 2008. Results: 27,317 radiologic technicians have been produced since the administration of the national qualifying exam for radiologic technicians. About 18,000 radiologic technicians are currently working. There are 39 colleges or universities with Departments of Radiology and the admission quota is 2,120 students excluding one college. The ratio of radiologic equipments to radiologic technicians is 2.6 to 1. Conclusion: There is a dilemma in which some radiologic technicians fail to find appropriate jobs while some clinics or hospitals are in need of radiologic technicians. This dilemma is due to unreasonable regional discrepancies in pay system and welfare situation, and excessive profit-oriented recruiting system of clinics and hospitals. The increase of students of Radiologic Departments and approval of additional departments will end up with producing superfluous high academic degree holders, which is on the contrary to the government policy to produce more job opportunities. So the policy of increasing Radiologic Departments should be reconsidered.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.27-33
• /
• 2006

Evaluating comfort of illumination environment of building interior is recognizing the degree of glare causing discomfort. Currently, to use the experimental formula for discomfort glare studied abroad it would be not appropriate because each races feel about the degree of glare differently. Therefore, this study aim to make up prediction formula for evaluating discomfort glare reasonably from Koreans' vision and it proceeded with 4 stages as follows: First, after reviewing the existing discomfort glare evaluation formula, I selected experimental variables. Second, I made a mock-up that I can control experimental variables and conditions according to the purpose of this study. Third, 1 conducted discomfort glare evaluation experiment. Finally, compared with UGR evaluation method suggested for Westerner in prior studies. In conclusion, 1) it's proved that discomfort glare is influenced highly by a light source luminance, background luminance and location of testee and the line of vision. 2) In interior discomfort glare experiment whether the glare light source is placed within range of vision or not has more significant influence than the distance between the light source and testee. 3) I compared and analyzed with UGR, the most representative discomfort glare evaluation system and I found there is a little difference in the results. This shows discomfort glare of Koreans and Westerners are different.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.290-301
• /
• 2017

This study examined the causal relationship among the leadership type, organizational commitment, and job performance, and to improve the organizational performance and effective methods of human resource management in hospital organizations. The survey period was from October 6, 2016 to October 20, and 375 employees working in hospitals were selected for the final survey. To analyze the validity of the measurement variables, reliability and confirmatory factor analysis were conducted, and the covariance structure equation analysis was conducted to grasp the causal relationship among leadership, organizational commitment, and job performance. In conclusion, leadership, organizational commitment, and job performance were significantly different according to the occupation(p<0.05), age(p<0.05), and working period(p<0.05), and individual care(p<0.001) and conditional reward(p<0.001) showed a high causal relationship with the organizational commitment and job performance. In the future, leadership that can take care of the individual characteristics of the members of the organization and ability to demonstrate their competence will be needed, and it will be necessary to establish a reasonable compensation system after measuring the degree of achievement of work. In addition, leadership needs to be in place to promote organizational performance considering the job type, gender, age, and duration of work. Managers should make efforts to form an organizational culture and provide related education programs to improve loyalty and attachment of members to the organization.

• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.716-730
• /
• 2016

The meaning and role of science culture based on such values as rational thinking, creativity, critical validation has been growing in the process of discussing various social problems. In order to diffuse science culture, it is important to sustain citizen's activeness by providing contents which can induce interest on the base of two-way communication between public and experts and to support citizen activities performed voluntarily. To that end, various people such as scientist, government policymaker, communicator, those in charge of culture and art, exhibition curator should make up collaboration system and such requirement as motivation, leadership, agreement between the participants, communication, trust relationship is also to be met properly in order to proceed collaboration efficiently. This study reviews how these factors are coming true in governmental project for science culture and develops proposal for improvement on the base of opinions collected through expert meetings, interviews, workshop and data research. In addition, it explains that government must strengthen scientific cultural project personnel and lay infra such as communications hub, regional center, platform and improve the business selection method to promote competition and collaboration among project participants with reformation of reward and regulatory systems. It is performed to suggest comprehensive ways to increase efficiency of project for science culture out of not the deficit model which regard public as passive acceptant but context model or PES(public engagement in science) that take public who focus his attention and participate actively into account.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2558-2569
• /
• 2012

While the cost of technology development is increased, the life cycle of products and services that have been developed has become progressively shorter. Open innovation have been increasing by company as a strategy to respond to the rapidly changed market. Technology transfer from universities is one of the typical means of technological innovation. Although a university has invested significant resources in R&D, the results has been neglected. Therefore, at the moment, research is needed about the outcomes and efficiency of technology transfer at universities. In the previous research, since most of studies focus on the analysis of factors that influence the outcome of technology transfer, in this study, targeting domestic universities, the efficiency of technology transfer at the university was analyzed. In addition, differences in the efficiency of different types of university is verified. Consequently, universities specializing in technology and industry has high-efficiency than the others. There is no significant difference between the groups of universities whether or not to participate in Technology Licensing Office(TLO). More efforts are required for successful results of TLO in Korea. This study is expected to be able to provide reasonable indicators on technology transfer for further research.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.9
• /
• pp.629-640
• /
• 2014

In this study, the applicability of dynamic water quality model to TMDL system was examined, methods for setting of water quality goal and estimation of allocation loads were suggested and results of applying these methods were analyzed. HSPF model was applied for Miho stream basin as a dynamic water quality model. The model was calibrated using measurement data obtained in 2009~2010 and showed satisfactory performance in predicting daily variations of flow rate and BOD concentration. Methods for TMDL application were categorized into 3 cases; water quality management (1) considering low flow condition(Case I), (2) considering entire period of the year (Case II) and (3) considering the worst water quality condition (Case III). BOD water quality goals at the end of Miho stream watershed increased in the order of Case IICase I>Case III. If further researches on base precipitation and method for model input of nonpoint source pollutant were carried out, water quality could be managed more reasonably and scientifically by applying dynamic water quality model to TMDL. The result of this study is expected to be used as primary data for TMDL using dynamic water quality model.