• Economic and Environmental Geology
• /
• v.53 no.3
• /
• pp.221-234
• /
• 2020

We occur together with telluride minerals. Fluid inclusions in the euhedral quartz crystals are mainly aqueous liquid-rich inclusions, which have salinities about 0.18-2.24 wt% NaCl equivalent. Some quartz vein contains aqueous vapor-rich inclusions as well. Homogenization temperatures of the assemblages of the liquid-rich inclusions are about 141-384 ℃, and the temperatures are lower at the shallower vein samples. In the high Au-Ag grade depth intervals, relatively deeper fluids have relatively higher salinities and homogenization temperatures, while shallower fluids show somewhat wider ranges. These might indicate that the deep Au-Ag bearing hydrothermal fluids at the Moisan area experienced phase separation as well as mixing with meteoric water by decreasing pressure. Au-Ag precipitation in the Moisan deposit is not associated with pyrite, but pyrite include Au-Ag bearing phase as an inclusion, which might possibly be tellurides or electrum. Au/Ag ratios in the Au-Ag bearing phase do not change with different depth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.669-676
• /
• 1999

The dentigerous cysts originate through alteration of the reduced enamel epithelium after amelogenesis is completed, with accumulation of fluid between the layers of the enamel epithelium, or between this epithelium and the tooth crown. Next to the radicular cyst, they are the second most common type of odontogenic cyst. They occur over a wide age range with a peak frequency in the 2nd to 3rd decade. A substantial majority involve the mandibular third molars, followed in order of frequency by the maxillary permanent canines, mandibular second premolars, and maxillary third molars. With regard to the treatment of these cysts, the marsupialization procedure with obturator is recommended during the age when the eruptive force of the teeth is still strong. It can be effective when preservation of the displaced teeth is desirable. We treated the dentigerous cyst by marsupialization with obturator and guided the eruption of involved teeth to normal position. And we got the results as follows : 1. Severely dislocated teeth associated with dentigerous cyst erupted into proper position. 2. The enamel hypoplasia and the root deformity were observed some cases. 3. The bone expansion and defect were healed without infection and recurrence.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.52-52
• /
• 2012

최근 선진국을 중심으로 제조기술의 산업혁명이라고 불릴 정도로 큰 파급효과가 기대되는 자기조립기반의 산업공정기술을 확보하기 위한 많은 노력과 연구들이 활발하게 진행되고 있다. 자기조립(Self-Assembly) 현상은 자연에서 일어나는 자발적인 힘으로 원자 또는 분자 단위까지 구조물을 제어하고 bottom-up 방식(상향식: 원자/분자 스케일의 나노구조를 배열/조립하여 원하는 형태의 패턴을 만들어 내는 방식)으로 원하는 구조물을 설계/제작할 수 있는 능력을 가지고 있다. 기초적인 과학으로부터 출발한 자기조립기술은 최근 자기조립 응용개발에서 많은 성과를 이루어내면서 산업화 가능성을 크게 하고, 과학계와 산업계의 많은 관심을 불러일으키고 있다. 반도체 산업기술을 예측하는 ITRS 로드맵(2005년)에 의하면 directed self-assembly 방법이 새로운 미래 패터닝 기술로 개발되어 2016년경에 사용되고, 자기조립소재로 제작된 다양한 응용소자들은 새로운 미래소자로 개발될 것으로 예상하고 있다. 이에 맞추어 국내 기업들도 diblock copolymer를 이용한 나노패터닝 기술 확보를 위한 연구를 진행하고 있다. 또한 IBM은 자기조립기술을 반도체공정에 실험적으로 적용하여 자기조립기술이 생산 공정에 부분적으로 적용될 가능성이 크다는 것을 보여주었다. 산업계와 함께 학계의 연구센터에서는 산업화를 위한 자기조립 집적화 공정(Integrated process) 개발을 이루기 위하여 체계적으로 연구를 실시하고 있다. 미국의 Northeastern 대학의 CHN(Center for high-rate Nanomanufacturing) 연구센터는 자기조립 집적화에 용이한 새로운 개념의 소자를 제안하고 이를 집적화하기 위한 다양한 공정을 개발하고 있으며, Wisconsin 대학의 NSEC(Nanosacle Science and Engineering Center) 연구센터는 diblock copolymer를 이용한 나노패터닝 기술 개발에서 획기적인 결과를 도출하여 산업계에 적용될 가능성을 높이고 있다. 이와 같은 결과들로부터 앞으로의 자기조립기술에 대한 연구는 3차원 구조물을 제작할 수 있는 집적화 공정에 집중될 것이고, 이를 위하여 새로운 개념의 단순한 구조의 응용소자개발도 함께 추진될 것으로 판단된다. 또한 실용 가능성이 큰 집적화 공정으로 개발하기 위하여 기존의 top-down 방식을 접목한 bottom-up 방식의 자기조립 집적화 공정이 개발될 것으로 예상하고 있다. 이와 함께 자기조립공정은 반복되는 구조를 쉽게 제작할 수 있는 장점을 가지고 있어 다양한 응용소자 [태양전지(solar cell), 연료전지(fuel cell), 유연성 있는 전자기기(flexible electronics), 화면표시 장치(display device)] 제작에 쉽게 이용되어 새로운 산업을 창출할 수 있는 가능성을 보이고 있다. 본 자기조립 연구 센터에서는 이와 같은 자기조립 특성을 제조공정에 적용하여 혁신적인 제조공정기술을 확보하고자 연구를 진행하고 있다. 그러므로 본 발표에서 이와 같은 연구 흐름과 함께 본 센터에서 진행하고 있는 자기조립 제조방법을 소개하고자 한다. 이와 함께 자기조립방법을 이용하여 제작된 다양한 응용소자 개발 결과를 발표하고, 이를 top-down 방식과 접목하여 집적화공정으로 개발하는 전략을 함께 소개하고자 한다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.4
• /
• pp.3-17
• /
• 1994

The error probability of QPSK and DPSK signals with diversity reception technique in m-distribution fading plus impulsive noise environments has been derived and the error probability is evaluated and compared with that in Gaussian noise environment. The error performance degrades as impulsive noise becomes strong and degree of degradation of signal performance in QDPSK signal is larger than that in QPSK signal. The diversity reception technique can improve the error performance not only in fading plus Gaussian noise environment but in fading plus impulsive noise environment. When diversity reception technique is used, the improvement of error performance attains about 10dB to 15dB in terms of CNR as compared with that in non diversity reception. Among diversity techniques the maximal ratio combining is must effective. When diversity reception and coding techniques are used together in impulsive noise plus Rayleigh fading environments, the improvement of error performance attains about 12dB to 15dB in terms of CNR as compared with that of only diversity reception technique case and the improvement of error perform- ance in RS coding attains about 2dB in terms of CNR as compared with that of BCH coding case.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.16-29
• /
• 1991

The occurrence of thrombotic occlusion & endothelial injuries at the site of anastomosis have been considered as major problems in microvascular surgery. The purpose of this study was to ascertain whether a end-in-end(sleeve, telescope) anastomosis compared favorably with end-to-end anastomosis in healing procedures on the endothelium and to study the possibility of clinical application in end-in-end method. The microvascular anastomoses have been performed with end-in-end method in the femoral arteries of 20 rats group, also with end-to-end method on the same arteries of another 20 rats group, and then the four anastomosed vessels in subdivided groups on each group were taken after period of 1, 3, 7, 14, 21 days following by anastomoses for scanning electron microscope observation. The results were as following: 1. The patency rate was 90% in the end-in-end group and 85%in the end-to-end group and late thrombus occurred at 7, 14 days on both groups, which suggested -consistent monitoring of patency was required for two weeks at least. 2. Platelet aggregates at the site of anastomosis began to organize on post-operation 3 days and in the end-in-end group, the initially decreased lumen of inserted vessel was gradually increasing on 7 days due to atrophy of the medial layers. 3. Re-endothelialization was completed between 7 and 14 days in end-in-end group, whereas between 14 and 21 days in end-to-end group.

• Pediatric Infection and Vaccine
• /
• v.22 no.3
• /
• pp.201-205
• /
• 2015

Acute maxillary sinusitis is a common disorder affecting children. Untreated acute sinusitis can develop into chronic sinusitis, and complications, such as orbital cellulitis or abscess, can occur. Maxillary sinusitis of odontogenic origin is not a well-recognized condition and is frequently missed in children. As an odontogenic source of sinusitis, the dentigerous cyst is one of the most prevalent types of odontogenic cysts, and it is associated with the crown of an unerupted or developing tooth. This report concerns a nine-year-old boy who was diagnosed with maxillary sinusitis originating from a dentigerous cyst with supernumerary teeth. The boy visited our pediatric clinic presenting with rhinorrhea and nasal obstruction and was initially diagnosed with maxillary sinusitis only. With antibiotic treatment, his symptoms seemed to improve, but after 2 months, he came to our clinic with left facial swelling with persistent rhinorrhea and nasal obstruction. Radiographic examinations of the sinuses were performed, and he was diagnosed with maxillary sinusitis originating from a dentigerous cyst with supernumerary teeth. After a surgical procedure involving the removal of the dentigerous cyst with supernumerary teeth, the symptoms of sinusitis gradually diminished. There are only very few cases in the pediatric medical literature that remind us that odontogenic origin can cause maxillary sinusitis in children. Our patient can act as a reminder to general pediatricians to include dentigerous cysts in the differential diagnosis of maxillary sinusitis.

• Korean Journal of Culture and Social Issue
• /
• v.12 no.4
• /
• pp.1-36
• /
• 2006

This study examines the conception of the self using indigenous, cultural and psychological analysis. The self is viewed from four aspects: (1) conception of the self as an entity (the self in general, the self as an unique entity and the self when alone), (2) conception of self in the context of family (the self when with mother, father, children and spouse), (3) the self with the context of close and working relationships (the self when with friends, teachers, work superior and work subordinate), and (4) the self in context of the larger society (the self when with strangers and foreigners). A total of 1,465 respondents (623 elementary, middle, high and university students and their parents = 842) completed an open-ended questionnaire developed by the present authors. The results reveal two patterns of results. First, the conception of self in Korea is influence by one's role. Second, the conception of self in influenced by relationship and context and there is an emphasis on the flexibility and adjustment of the self to relationship and context. Implications of the conception of the self in context of relationships, roles, and contexts are discussed, along with the importance of indigenous, cultural and psychological analysis.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.119-127
• /
• 2002

위치기반서비스(LBS: Location Based Service)는 점차 확대되어 가는 무선정보통신 환경을 통해서 지리정보와 특정목적의 컨텐츠를 결합, 제공하는 서비스이다. 이 글에서는 현재 국내에서 상용화되어 있는 서비스 사례와 함께 위치기반서비스의 기본적인 구성과 무선측위기술, 그리고 최근 기술동향을 정리하였고 기술발전과 함께 진행되고 있는 국내, 국제표준화기구의 표준화방안과 무선측위기술의 위치정확도 향상방안을 제시하였다.

• Information and Communications Magazine
• /
• v.24 no.6
• /
• pp.58-66
• /
• 2007

IEEE 802.11 무선랜 기술은 가장 성공한 무선 통신 기술 중 하나이다. 주로 가정이나 사무실, 공공 장소에서 소규모 무선 네트워크를 형성하여 무선 인터넷 환경을 제공한다 고속통신이 가능하며 사용자의 이동성을 함께 제공하는 무선 통신 기술에 대한 요구가 증가하면서 새로운 기술 표준도 함께 도입되었다. 이에 따라 IEEE 802.11 무선랜은 크고 복잡한 형태로 발전하고 있으며, 이에 상응하는 무선랜 환경을 관리하기 위한 기술 표준이 필요하게 되었다. 이러한 요구를 충족하기 위해서 IEEE 802.11v Task Group (TG)이 발족하여 새로운 기술 표준을 만들고 있다. 본고는 현재 진행중인 IEEE 802.11v TG에서 발행한 초안을 바탕으로 무선네트워크 관리 기술에 대한 내용을 소개한다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.25-28
• /
• 2003

최근 생활수준의 향상과 함께 고기능성, 고감성의 제품이 요구되고 또한 소비패턴의 고급화, 다양화, 개성화와 함께 단시간의 유행변화에 신속하게 대응하기 위하여 섬유날염면에서도 다양한 색상과 디자인이 요구되고 있다. 그러나 기존의 rotary printing system에 의한 날염기술은 이러한 요구에 다양하고 신속한 대응을 할 수 없으므로 새로운 날염기술의 개발이 요구되었고 이에 xerography printing에 의한 직물날염이 주목받게 되었다. (중략)