• Journal of the Korean Geographical Society
• /
• 제42권4호
• /
• pp.540-559
• /
• 2007

The purpose of this paper is to analyse the locations and to interpret the landscapes of the local towns in Joseon Dynasty from Feng-shui's point of view. As a result of analysing the locations of towns in Gyeongsang Province, the towns which have typical Feng-shui landscapes make up to 58% of the total. Historically, the local towns that were established in the early period of the Joseon Dynasty didn't reveal Feng-shui's landscape, but those that were established in the late period of the Joseon Dynasty revealed the Feng-shui's landscape clearly. In this article, I classify the local towns of the Gyeongsang Province into 3 types: 1. Non Feng-shui type These towns are located near the seashore. The main reason that these towns were located at the seashore was defense against an enemy. 2. Semi Feng-shui type. These towns don't have natural location but have a man-made landscape, based on the principles of Feng-shui. 3. Typical Feng-shui type. These towns were typically administrational towns which were located at the center of a local region.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제2권1호
• /
• pp.25-40
• /
• 2003

The purpose of this thesis is development of detection algorithm for stop-line detector. Detail detection area is set in basing detection area($1.8{\times}4.0m$) and traffic information(volume, occupancy, nonoccupancy) is collected by passive infrared detector at designing detection area. The basis detection area($1.8{\times}4.0m$) is named existing PIR and detection area applied on development algorithm is named proposal PIR. The proposal PIR is collected data such volume, occupancy, nonoccupancy, speed and lane change, but this thesis is limited to evaluate for volume, occupancy and nonoccupancy The procedure and each step of being developed algorithm is described in the next (1) The detection area of proposal PIR is made up of 2 of $1.8{\times}0.6m$ size(the detection area is named 1 and 3) and 1 of $1.8{\times}1.78m$ size(the detection area is named 2) (2) The image detection area is set on monitor to analyze outdoor photographing data then video frame analysis has been done by analyzer. (3) The occupancy, nonoccupancy and speed data of vehicle have been collected with the detection area 1 and 3 and lane change has been collected with combination of detection area 1, 2 and 3 The MAD and MAPE have been utilized to being compared with volume, occupancy and nonoccupancy for the field application and evaluation of a algorithm As the result, the proposal PIR data have been identified superior to the existing PIR data and the effect has been improved its information(volume, occupancy and nonoccupancy)

• Journal of Plant Biology
• /
• 제38권3호
• /
• pp.305-317
• /
• 1995

The bryophyte communities on the forest floor of the mixed coniferous, deciduous broad-leaf forest and the evergreen coniferous forest of cool temperate and subalpine zones in Chiri Mountains with the highest peak (Cheonwangbong 1915 m) in south-central part of the Korean Peninsula were investigated from the phytosociology viewpoint. As a result, five bryophyte communities were recognized, considering the species composition of vascular vegetation; A. Sasamorpha borealis-Abies koreana/Dicranum scoparium-Plagiothecium silvaticum community, B. Bosta minor-Abies koreana/Anomodon rugelii-Plagiomnium cuspidatum community, C. Abies koreana/Hylocomiopsis ovicarpa-Entodon rubicundus community, D. Abies koreana-Picea jezoensis/Hylocomiopsis ovicarpa-Thuidium kanedae community, E. Abies koreana-Pieea jezoensis/Hylocomium splendens-Pleurozium sehreberi community. Among these, the communities A, B, C and D were distributed in the mixed coniferous and deciduous broad-leaf forest of lower altitudes (1200 to 1700 m) and characterized by the elements of the cool temperate zone. They were confimled as synusies belonging to the Fraxino-Abietetum koreanae Song 1988. The community E was distributed in higher altitudes (1700 m to near the summit) and characterized by the species group of the holarctic elements, e.g. Hyloeomium splendens, Pleurozium sehreberi, Dieranum majus, etc. limited in subarctic; subalpine and arctic; alpine zones. The community E was confirmed as a synusie of the Abieti koreanae-Piceetum jezoensis Song 1991 belonging the Vaecinio-Pieeetea Br.-BI. 1939. Up to date many investigator have described the coniferous forest distibuted above 1200 m in Chiri mountauns as the forest vegetation of subalpine zone. However, from the results of the present study, the boundary of the mixed forest and the true subalpine coniferous forest was elucidated to be ca. 1700 m phytosociologically. Species richness was highest in the community E, and the other four communities showed a similar species richness. Among the species diversity indices, H' and D were high in the communities Band E, low in the communities A and C, and medium in the community D. The values of J' decreased with the increase in altitudes and the community E showed the lowest value. The result of Bray-Curtis ordination revealed that the diversity analysis and the division of the above two forest zones are justifiable. The taxa of the bryophyte communities were composed of 25 families, 46 genera, 73 species, 1 subspecies and 2 varieties.

• Journal of Internet Computing and Services
• /
• 제14권6호
• /
• pp.95-105
• /
• 2013

Recently, SME's Collaboration activities have become one of a vital factor for sustaining competitive edge. This is because of the rapidly changing and competitive market environment, and also to leverage performance by overcoming obstacles of having limited internal resources. Discussing about the effects and relationships of the firm's collaboration activities and its outputs are not new. However, as ICT and various technologies have been diffused into the traditional industries, boundaries and practice capabilities within the industries are becoming ambiguous. Thus contents of the products/services and their development methods are also go and come over the industries. Although many researchers suggested the relations of SME's collaboration activities and innovation performances, most of the previous literatures are focusing on broad perspectives of firm's environmental factors rather than considering various SME's idiosyncrasy factors such as their major product and customer types at once. Therefore, the purpose of this paper is to analyze how SME(Small Medium Enterprise)'s external collaboration activities by their idiosyncrasy act as an input to types of innovation performance. In order to analyze collaboration effects in detail, we defined factors that can represent the SME's business environment - Perceived importance of using external resources, Perceived importance of external partnership, Collaboration and Collaboration levels of Major Product types, Customer types and lastly the Firm Sizes. We have also specifically divided the performance of innovation types as product innovation and process innovation based on existing research. In this study, the empirical analysis is based on Probit Regression Model to observe the correlations with the impact of each SME's business environment and their activities. For the empirical data, 497 samples were collected which, this sample data was extracted from the 'Korean Open Innovation Survey' performed by ETRI(Korean Electronics Telecommunications Research Institute) in 2010. As a result, empirical test results indicated that the impact of collaboration varies depend on the innovation types (Product and Process Innovation). The Impact of the collaboration level for the product innovation tend to be more effective when SMEs are developing for a final product, targeting on for individual customers (B2C). But on the other hand, the analysis result of the Process innovation tend to be higher than the product innovation, when SMEs are developing raw materials for their partners or to other firms targeting on for manufacturing industries(B2B). Also perceived importance of using external resources has effected to both product and process innovation performance. But Perceived importance of external partnership was statistically insignificant. Interesting finding was that the service product has negative effects on for the process innovation performance. And Relationship between size of the firms and their external collaboration activities with their performance of the innovations indicated that the bigger firms(over 100 of employees) tend to have better for both product and process innovations. Finally, implications of the results can be suggested as performance of innovation can be varied depends on firm's unique business idiosyncrasy as well as levels of external collaboration activities. The Implication of this research can be considered for firms in selecting an appropriate strategy as well as for policy makers.

• Korean Journal of Ecology and Environment
• /
• 제41권3호
• /
• pp.348-359
• /
• 2008

The objectives of the study were to elucidate functional modifications in relation to hydrological, physico-chemical and ecological aspects in Daechung Reservoir by the upper dam constructions of Youngdam Reservoir and analyze temporal and spatial dynamic patterns using trophic parameters of TN, TP, chlorophyll (CHL), and Secchi depth (SD). Hydrological data such as inflow, precipitation, and water levels before (BDC, 1995$\sim$2000) and after (ADC, 2001$\sim$2006) the dam construction showed that precipitation had greater correlations with inflow volume in the BDC (r=0.964, p=0.002) than in the ADC (r=0.857, p=0.029). This outcome indicates that the upper dam construction influenced the inflow and water level of Daechung Reservoir. One of the greatest changes after the dam construction was decreases of nutrient contents (TN, TP) and increases of algal biomass (as CHL) as the water residence time increases. Values of CHL had greater relations with TP in the ADC (r=0.412, p<0.001) than the BDC (r=0.249, p<0.001), indicating that CHL had greater response at a given phosphorus in the ADC. Thus, algal yield at a given TP (CHL : TP ratios) increased in the ADC, resulting in a greater CHL-TP relations. Long-term interannual TP, TN, SD, and CHL showed greater variations in the riverine zone (RZ) than any other transition (TZ) and lacustrine zones (LZ). This phenomenon was mainly attributed to rapid hydrological response in the riverine zone (RZ) to flow reductions (short water residence time) from the upper dam, resulting in ambient contents of nutrients and light regime along with functional relations of CHL-TP.

• Korean Journal of Ecology and Environment
• /
• 제41권3호
• /
• pp.382-394
• /
• 2008

The objective of this study was to analyze temporal trends of water chemistry and spatial heterogeneity between the dam site (Daecheong Reservoir, S1) and the downstream (S2$\sim$S4) using water quality dataset (obtained from the Ministry of Environment, Korea) during 2000$\sim$2007. Water quality, based on eight physical and chemical parameters, varied largely depending on the years, sampling sites, and the discharge volume. Conductivity and nutrients (TN and TP) showed a decreasing trend in the downstream (S4) rather than the dam site during the monsoon. Spatial variation increased toward downstream (S4) from Daecheong Reservoir (S1). Also, BOD and COD increased toward downstream. Because of input of nutrient and pollutant nearby S1, lentic ecosystem in monsoon, BOD and COD were slightly increased. whereas relatively decreased in S4, lotic ecosystem in monsoon, by dilution effect of nutrient and pollutant by discharge from upper dam, S1. Spatial variation of SS increased toward downstream (S4) by the side of Daecheong Reservoir (S1). Based on the dataset, efficient water quality management in the point source tributary streams is required for better water quality of downstream. Monthly characteristics of DO showed the lowest value in the monsoon that tend to increase water temperature. DO was lowest in October at S1 because turbid water, input to the Daecheong Reservoir in the monsoon affect to the postmonsoon period. In contrast, water temperature increased toward summer monsoon, in spite of some differences showed between S1 and S4 environment. Overall, the characteristics of water quality in downstream region have close correlation with discharge amount of Daecheong Reservoir. Thus, those characteristics can explain that discharge control of upper dam mainly affect to the water quality variation in downstream reach.

• Journal of the Korean Applied Science and Technology
• /
• 제35권2호
• /
• pp.433-444
• /
• 2018

This study aims to examine the screening rate of health screening of the disabled by screening the data of disability and health statistics of the National Health Insurance Corporation, to suggest the problems of health examination and the future improvement measures, and also to review the type of health management of the disabled based on the results of health examination interview. As people with limited daily life or social life for a long time because of their physical/psychological disabilities in accordance with the Article2 of , out of 2,479,080 registered people with disabilities on the basis of December 31st 2015, the research subjects were limited to people with disabilities who participated in the health screening and health type for presenting the opinions about policies. In conclusion, regarding the health screening for the disabled, first, it would be necessary to collect the opinions from people with disabilities in order to prepare the health screening service suitable for them. Second, it would be needed to develop the health screening items for each type of disability and severity. Third, it would be necessary to consider the medical equipments and amenities of health examination for the disabled. Fourth, there should be the securement of manpower and education for service providers. Fifth, the mobility right of the disabled should be secured. Regarding the health type of the disabled, first, the expert consultative group in each area should be composed for the health enhancement of the disabled. Second, it would be necessary to screening the current status of health enhancement programs for the disabled and operating facilities. Third, the Central Health Medical Center for the Disabled, shown in the law on the securement of health rights & medical accessibility of the disabled should develop the standardized health enhancement programs for each disability type and severity. After examining the contents of health examination and health type of the disabled, the opinions about policies were suggested. Thus, in the future, there should be more detailed researches based on the tasks suggested by this study, and also the causal relations between health of the disabled and relevant programs should be continuously revealed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제37권11호
• /
• pp.1435-1442
• /
• 2008

The purpose of this study was to identify the influence of consumption value on healthy functional food choice. Also, this study explored the role of health motivation, health concern, and food involvement as a moderating variable in the relationship between consumption value and healthy functional food choice. A total of 281 responses were collected using on-site survey (response rate 96.0%) from college students in Daegu, Gyeoungbuk Province. The questionnaire contained questions on consumption value, health motivation, health concern, food involvement, and purchasing intention of healthy functional food. The respondents rated the items using a 5-point scale from 1 (strongly disagree) to 5 (strongly agree). According to the confirmatory factor analysis, item evaluating using factor loading resulted in the retention of 25 consumption value items loading on seven factors, four health motivation items loading one factor, six health concern items loading on one factor, and four food involvement items loading on one factor with an internal consistency. Results of stepwise regression found that social value-I, emotional, functional, epistemic, and conditional values among consumption value determined the purchasing intention of healthy functional food. Results of hierarchical regression showed that health concern had a positive effect on the relationship between social value-I and purchasing intention of healthy functional food.

• Journal of the Korean Institute of Landscape Architecture
• /
• 제37권3호
• /
• pp.105-112
• /
• 2009

This study has attempted to facilitate various new technologies related to indoor containers and develop a desirable planting environment after investigating the growth (including root growth) of shade-tolerant landscape plants under slit processing, a natural indoor ventilation system. The following results were found: In terms of the shoot growth of Fatsia japonica in a slit container, no distinctive difference was observed in comparison with the control group. However, growth was good when the container 250mm tall or taller. Therefore, it was verified that optical soil depth is more important than slit processing in shoot growth of Fatsia japonica. In Fatsia japonica root length was observed as follows: Control 2(250mm) > Slit 2(250mm) > Control 1(195mm) > Slit 3(360mm) > Control 3(360mm) > Slit 1(195mm). The largest growth was observed in Control 2(250mm), which had no slit processing. In term of root width, this was lower than the initial value in all groups, which means that the root grew vertically, not horizontally. In terms of plant height of Ophiopogon japonicus, a gradual increase was observed in the control group that had no slit processing. No significant growth was detected in the slit system, however. In terms of shoot number, slit containers were generally higher than the control group. In terms of fresh and dry weights, on the contrary, slit containers were mostly lower than the control group. In Ophiopogon japonicus, root length was observed as follows: Slit 2(250mm) > Slit 1(195mm) > Control 2(250mm) > Control 3(360mm) > Slit 3(360mm) > Control 1(195mm). In Ardisia japonica, slit containers were mostly greater than control group in terms of plant height. The greatest plant height was observed at Slit 2(250mm) instead of Slit 1(195mm) and Slit 3(360mm). Except for plant height and shoot number, however, no significant shoot and root growth was observed. Root length was observed as follows: Slit 2(250mm) > Slit 3(360mm) > Control 3(360mm) > Slit 1(195mm) > Control 2(250mm) > Control 1(195mm). Therefore, root length in slit containers was mostly greater than in the control group. The width of root, however, declined in general.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제19권1호
• /
• pp.139-146
• /
• 2015

The amount of by-product from sulphur increases in domestic industrial facilities. However, the amount of its consumption is limited so that the amount of unused sulphur continues to increase. Therefore, in this study, the use sulfur polymer as the concrete surface protecting material was conducted. The compressive strength showed that as the substitution ratio of filler increased up to 40%, the compressive strength also increased. A high compressive strength was shown at the curing temperature of $40^{\circ}C$ (SS, FA) and $60^{\circ}C$ (OPC) according to the type of filler. The difference of compressive strength between air dry curing and water curing was insignificant so that there was no significant influence of moisture during curing process. The evaluation result of bond strength showed that the highest bond strength was shown at the air-dry condition of $40^{\circ}C$ regardless of type of filler. Bonding didn't occur properly during water curing in comparison to air dry curing. Also, in case of the specimen cured at $60^{\circ}C$, discoloration and hair cracks appeared due to the influence of temperature, and the highest bond strength was shown at the substitution ratio of 20% (SS, FA) and 30% (OPC) according to the type of filler. The releasing test result of harmful substance showed that no harmful substance was released, so there is no harmfulness in the surface protecting material using sulfur polymer. As a conclusion drawn in this study, it is most appropriate to substitute silica by approximately 20%, mix and cure at the air-dry condition of $40^{\circ}C$ in order to use sulfur polymer as the surface protecting material.