• Applied Microscopy
• /
• v.42 no.1
• /
• pp.35-42
• /
• 2012

The skin is the largest organ of the integument system whose surface is closely related to many physiological and pathological conditions. The skin surface is closely related to functional status of the epidermis and dermis. The outermost surface of the skin shows characteristic pattern defined by small furrows are called micro-relief. The micro-relief change is according to physiological and pathological conditions of the skin. But, there is no data on health Korean skin micro-relief yet. This study presents some aspect of health Korean skin micro-relief from the twenties. The silicon replicas obtained from forearm, dorsum hand and finger were analyzed by profiles were accessed by stereoscopy. We measured density of furrow, width of furrow, and depth of furrow in micro-relief with sectioned silicon replica sample using stereoscope. Stereoscopic analysis showed that male group has a larger density of furrow and depth furrow in finger significantly. The densities of furrow were shown different not only between forearm and finger but also between finger and hand in male with female group. In conclusion, there were differences results between sex different and regional difference in skin replica profile. These quantitative data can be used for basis of further skin research for Korean.

• Journal of the Korean Geographical Society
• /
• v.36 no.3
• /
• pp.217-232
• /
• 2001

One of the molt debatable Issues on geomorphological study in Korea should be the discussion over the formation process of gent1e slope surfaces on the piedmont area. In this study, the characteristics of spatial distribution and the formation process of geomorphic surfaces were investigated by classifying the alluvial fans as three geomorphic surfaces alluvial the Bulguksa fault-line The fan surfaces, distributed along the west slue of Bulguksa Mts, consists the confluent alluvial fans continuously along the N-S direction The surfaces of Sincheon-Hyomun district juxtaposed to the Ulsan Bay must be infulenced by sea-level chance during the Quaternary Taken together, these observation suggests that the major four factors contributed to the fan formation 1) rather longer freeze-and-thaw cycle during the Glacial period. 2) the steep mountain slope along the west side of Bulguksa Mts.. which had been resulted from the horizont stress of EAst Sea 3)the tectolinear fault system developed by structural movement along the Bulguksa Fault-line valley. and 4) the erosion-labile characteristics of bedrock In this urea which is consisted of the Bulguksa granite and the sedimentary rock formed in Cretaceous period.

• Tunnel and Underground Space
• /
• v.14 no.2
• /
• pp.142-153
• /
• 2004

To investigate the influence of the rock mass inhomogeneity caused by layer geometry on the regional stress distribution the cuboid models considering a homogenous rock mass, inhomogeneous rock mass with plane layers and with uneven layers were analyzed and discussed. It was confirmed that the structure and existence of layers in rock mass affected the regional stress distribution. An approach based on an inverse analysis of the measured local stresses and the 3D finite element analysis was suggested, and used to estimate the regional stress field of the homogeneous and inhomogeneous models, which consist of the surface geometry of ground and both the surface and layer geometry respectively. Additionally, the approach of the regional stress considering the layer geometry in the rock mass was verified to estimate the regional stress field for a site.

• Water for future
• /
• v.28 no.2
• /
• pp.115-124
• /
• 1995

A GIS is capable of extracting various hydrological factors from DEM(digital elevation model). One of important tasks for hydrological analysis is the division of watershed. It can be an essential factor among various geometric characteristics of watershed. In this study, watershed itself and other geometric factors of watershed are extracted from DEM by using GIS technique. The manual process of tasks to obtain geometric characteristics of watershed is automated by using the functions of ARC/INFO software as GIS package. Scanned data was used for this study and it is converted to DEM data. Various forms of representation of spatial data are handled in main module and GRID module of ARC/INFO. GRID module is used on a stream in order to define watershed boundary, so it would be possible to obtain the watersheds. Also, a flow direction, stream networks and orders are generated. The results show that GIS can aid watershed management and research and surveillance. Also the geometric characteristics parameters of watershed can be quantified with ease using GIS technique and the hardsome process can be automated.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.1
• /
• pp.12-16
• /
• 1988

The observation of the tidal current and the bottom contour around the set net fishing ground were carried out at four different regions of the southern part of Korea in order to obtain the basic information on the migrating course of fishes. The bottom contour was surveyed with portable echo sounder, and the tidal current was observed by two different methods at the same time. One was 25 hour observation at the fixed position with self-recording current meter (Inter Ocean Model 135 type) and the other was the drift observation of radar reflectors. Most of the set nets have been set near bottom valleys. It was regarded that the fish school became to dense easily near the valley according to the combined effect of the tidal current and the bottom contour.

• Geophysics and Geophysical Exploration
• /
• v.2 no.4
• /
• pp.191-201
• /
• 1999

The interpretation of resistivity data has, so far, mainly been made under the assumption that the earth is of relatively simple structure and then using one or two-dimensional inversion scheme. Since real earth structure and topography are fully three-dimensional and very complicated In nature, however, such assumptions often lead to misinterpretation of the earth structures. In such situations, three-dimensional inversion is probably the only way to get correct image of the earth. In this study, we have developed a three-dimensional inversion code using the finite element solution for the forward problem. The forward modeling algorithm simulates the real field situation with irregular topography. The inverse problem is solved iteratively using the least-squares method with smoothness constraint. Our inversion scheme employs ACB (Active Constraint Balancing) to enhance the resolving power of the inversion. Including Irregular surface topography in the inversion, we can accurately define the earth structures without artifact in the numerical tests. We could get reasonable image of earth structure by Inverting the real field data sets taken over highway bridge construction site.

• Nuclear Engineering and Technology
• /
• v.17 no.3
• /
• pp.216-223
• /
• 1985

The Gaussian plume model is widely used to calculate the concentrations of gaseous radioactive effluents in the atmosphere. This model assumes that the terrain is flat, so that the dispersion coefficients which are the most important parameters in this model must be compensated in complex terrain such as in Korea. In this study the compensation of vertical dispersion coefficient in two dimensional x-z plane has been accomplished by comparing the Gaussian plume model with numerical model. The results show that the concentractions of radioactive effluents over complex terrain are more dilluted than those expected over flat terrain.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.51.1-51.1
• /
• 2015

달의 지형 중 계곡과 같아 보이는 곳을 Rima 또는 Rille 지형이라고 부르며 국제천문연맹(IAU : nternational Astronomical Union)과 미국지질조사국(USGS : United States Geological Survey)에서 관리하는 행성 지명 사전(Gazetteer of Planetary Nomenclature)에 명명된 달의 Rima 지역은 111개에 이른다. 그 중 Rima Hadley 지역은 아폴로 15호가 착륙한 지점으로 잘 알려져 있다. 본 연구에서는 2008년에 발사된 Chandrayaan-1 위성의 적외선 초분광 영상 탑재체인 Moon Mineralogy Mapper(M3) 데이터를 통해 Rima Hadley 지역의 분광학적 특성을 살펴보았다. M3 데이터는 감람석(olivine)이 풍부한 지역에서는 1 um 를 중심으로 흡수선이 나타남을 보이며, (Peter J. Isaacson et al., 2011) 2.8 um 중심의 흡수선을 통해 달의 OH(hydroxyl) 분포에 대해 설명한다. (Carle M. Piters et al., 2009, Georgiana Y. Kramer et al., 2011) 본 연구에서는 Rima Hadley 지역이 1 um 파장 근처에서 강한 흡수선을 가지는 것을 볼 수 있었고, 감람석이 풍부한 지역임을 확인할 수 있었다. 이처럼 감람석이 풍부한 곳은 현무암 지역으로 과거 용암이 분출되어진 곳으로 추측 해 볼 수 있다. 본 연구를 발전시킨다면 Rima Hadley 지역의 생성과 다른 Rima 지형의 형성 과정에 대해 더욱 많은 정보를 얻을 수 있을 것으로 기대된다.

• Spatial Information Research
• /
• v.17 no.3
• /
• pp.381-387
• /
• 2009

This study investigates the use of geomorphic analysis results obtained from high-resolution LiDAR-derived DEM. The results of analysis, slope angle and eigenvalue ratio (ER) were derived from the DEM for 3 landslide and 1 non-landslide occurrence area. Results of this study highlighted the importance of geomorphic analysis in characterizing landslide feature as well as the various contents in their future occurrence and activity. The relationship between the results of geomorphic analysis and landslides are well expressed in this paper.

• The Korean Journal of Quaternary Research
• /
• v.9 no.1
• /
• pp.33-42
• /
• 1995

우리나라의 서해(West Sea)는 일명 황해(Yellow Sea)라고 일컬어지는 약 40여 m의 평균 수심을 갖는 대륙붕 해저지형 분지에 의하여 지배되는 전형적 육연해이다, 그런데 이 바다는 중심부(황해의 중심부)를 기준으로 하여 중국 대륙의 산동반도에서 양가강 하구에 이르는 서부 해안을 가지며 북부에는 발해만의 해안이 있고 동부에는 서해(황해) 특유의 넓 은 조수환경(tidal environment)과 조수해안이 발달한다. 그러나 남쪽으로는 북서태평양과 연결된다. 한국 서해안이 평균 4m 이상의 조차(tidal range)를 나타내는 조간대 조수환경이 며 조간대 해저지형(intertidal morphology)이 전형적인 퇴적층(체)에 의하여 지배되는 여러 가지 특징을 나타낸다. 서해안 조수환경은 네델란드, 독일 또는 지배되는 여러 가지 특징을 나타낸다. 서해안 조수환경은 네델란드 독일 또는 미국의 경우와 같이 연구가 잘되어 세계 적으로 널리 알려진 소위 barrier island system and tidal depositional environments와는 크 게 다른 퇴적과정과 환경이다. 경기도 남양만의 조수 환경의 경우, 조간대 해저지형 요소인 조류로(tidal channel)와 조간대 정규해저(intertidal zone proper)에 관한 동력적 퇴적과정 연 구결과 조간대 특유의 lateral sedimentation 과 vertical sedimentation 2가지 퇴적과정중 후 자의 퇴적과정이 우세한 것으로 밝혀졌고 이러한 퇴적과정의 진행이 매우 안정한 지속성을 가지는 것이 특징이다, 이러한 퇴적과정의 조간대 퇴적물의 쇄설 입자는 약 20% 미만의 모 래(sand) 입자 50~70%의 실트(silt) 와 점토(clay) 입자가 20~30%에 달하는 입자조직 (grain texture)의 퇴적상을 나타낸다. 결과적으로 조간대의 동력적인 조수수괴의 수위(level of tidal water)는 평균 만조선과 평균 저조선으로 한정되며 이것은 퇴적과정과 퇴적작용의 조정(control) 요인으로 조간대 퇴적상의 발달과 분포에 큰 영향을 미친다, 예를들면 남양만 등의 대부분의 서해안 조간대 표층 퇴적상(녁\ulcorner미 sedimentary faci-es)은 만조선에서 간조 선에 가까울수록 조립화현상(coarsening trend)을 나타낸다. 이러한 퇴적상 변화는 저조선에 서 만조선으로의 조간대 지형과 주조수로의 지형.수력학적 특성이 다음과 같기 때문이다. a) a general decrease in width b) a general decrease in depth c) a general decrease in maximum and average current velocities d) a general increase in contents of suspended mud e) a general decrease in grain size of the bottom sand and an increasing abundance of muddy deposits. 우리나라 서해안 조간대 퇴적층(체)의 수직 층서(vertical stratigraphy)는 지난 3여년동안의 수십개의 vibracoring(주상시추)에 의하여 매우 흥미롭고 중요하게 밝혀지고 있는바 이것은 현세(Holocene)와 선현세(preHolocene: 11000 years BP)의 오랜시간 경과에 따른 조수환경 변화의 수직퇴적 과정과 기후 해수면 변화의 현상에 원인이 있다고 해석된다.(박용안 외, 1992-1995)결과적으로 서해안 조수퇴적체(층)의 분지주변(basim margin)진화과정이 밝혀지 고 있다.