• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.4
• /
• pp.410-415
• /
• 1997

To investigate the flowering and pod setting characteristics of peanut, Dae-kwangtangkong and Shinnamkwangtangkong were planted on April 20 and May 10 in 1994 at National Honam Agricultural Experiment Station. Number of days from planting to the maximum flowering in Daekwangtangkong were shorter than those of Shinnamkwangtangkong by 6 days in April 20 planting and by 13 days in May 10 planting. Flowering durations of Daekwangtangkong and Shinnamkwangtangkong in April 10 planting were 73 and 71 days, respectively, while those of both varieties were 64 days in May 10 planting. The rates of matured pods on cotyledonary, primary or secondary, and third branches were 58∼78, 6∼15 and 0∼2％, respectively. The rates of effective flowers in Daekwantangkong and Shinnamkwangtangkong were 10％ and 8％, respectively, in April 20 planting. The rates of matured pods were 100％ in Daekwangtangkong and 97％ in Shinnamkwangtangkong when pods were set within 15 days after the initial flowering, while the rate was decreased markedly when pods were set later than 35 days after the initial flowering.

• Journal of Aquaculture
• /
• v.11 no.3
• /
• pp.371-380
• /
• 1998

This study has been conducted to develop the techniques for spat production of the sun and moon scallop from January 1995 to December 1996. With the adult scallops collected from the Sogwipo area, spawning induction and larvae rearing were attempted several times and monthly changes of GSI were also monitored during the experimental period. The results obtained wre as follows. 1. GSI started to increase from June and showed the maximum value of 22.17 and 14.98 in female and male respectively in November, and then gradually decreased from December. 2. Spawning induction by heating method turned out to the most efficient way showing the responding rate of 64.8~91.5%. The responding temperature was $21.4~26.4{\circ}C$ which was $3.1~8.5{\circ}C$ increased from the rearing temperature of $16.3~18.3{\circ}C$. An average number of eggs spawned was $9.2{\times}10^5$ 3. the average size of eggs after fertilization was about $72{\mu}m$ in diameter. The first polar body discharge, blastula formation, and trochopore larvae appearance occurred 30 mininutes, 18 hours, and 22 hours after fertilization respectively. 4. Settling rates in various collectors were similar one another, whereas pouring larvae in the mesh was the most efficient way for larval setting. 5. The spates grew to be 1mm in their shell length for the first 50 days after fertilization and 9.6mm in 135days. 6. Correlation between shell length (SL) of the spat and the number of days (X) after spat settlement could be expressed as $SL=257.75e ^{0.0272x}$(r=0.9100).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.2
• /
• pp.79-88
• /
• 1998

This experiment was conducted from May to August in 1997 to selected the wrn hybrids being suitable for silage at farm in the Kongju National University through the comparison of growth characteristics, forage yield and growth analysis about native and imported corn hybrids for silage production. In this experiment, trial design was a randomized block design with three replication, testing varieties were 4 hybrids (Suwon 19, Kwanganok, Whengsungok, Suwonok ) of native corn hybrids and 13 hybrids (P 3156, P 3352, P 3144w, DK 501, DK 689, DK 713, DK 729, H 643.99, H 545.64, H 645.12, HC 7466, H 644.18, H ALISEO) of imported corn hybrids. The results obtained are summarized as follows; 1. The emergence rate of H643.99 was the highest with 97.0%. In rice black streaked dwarf virus(RBSOV), the hybrid of HC 7466 was lower infected with 1.6% than other hybrids. The plant hight of P 3144w was the highest with 339 cm and the stem length of P 3156 was the highest with 261 cm. In native com hybrids, the plant height and stem length of Kwanganok were recorded with 306 cm and 235 cm, respectively. 2. Leaf number and leaf area of Kwanganok were the greatest with 16 sheet per plant and $5,180\;{\textrm{m}^2}/l0a$, respectively. H 645.12 and H 545.64 had the greatest in ear to total dry matter ratio with 49.5% and 49.4%, respectively. 3. The fresh matter yield was significantly difference between growth stage, So Suwon 19 had the most level at 15 days before silking, P 3352 had the most level at silking date, Kwananok had the most level at 35 days a after silking. The fresh matter yield of native com hybrids such as Suwon 19 and Kwanganok was not apparent diffreences as compared with imported corn hybrids. 4. As the results of survey with dry weight, the quantity of dry matter accumulation were increase after silking. The varieties of P 3352, P 3156, Kwanganok, OK 713 were more quantity of dry matter production than DK 501, HC 7466. The Kwanganok of native com hybrid and Pioneer strain with high percentage of dry matter were higher dry weight than Limagrain strain. 5. HC 7466 had the largest LAR with $6.53\;{\textrm{cm}^2}/g$, H545.12 had the lowest LAR with $3.30\;{\textrm{cm}^2/g}$. P 3144 had the largest LAI, DeKalb strain including DK 713 were larger apparently than Limagrain strain including HC 7466 with 3.15. 6. The RGR of testing varieties was little difference of statistical significantly, but DK 501, and HC 7466 were lower than other corn hybrids. The CGR of native and American varieties was no apparent differences, but that of Limagrain strains were a large variation. According to the results obtained by this experiment, the eary growth such as emergence rate and RBSDV infection rate of Limagrain strains was more excellent than other strains. P 3156, P 3352, P 3144w, DK 713 and HC 7466 were suitable for silage condition such as dry matter yield, percentage of dry matter and % ear to total dry matter. The fresh and dry matter yield of native corn hybrids such as Suwon 19 and Kwanganok were not apparent differences as compared with imported corn hybrids, but percentage of dry matter was lower than other imported corn hybrids.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.719-725
• /
• 2019

In this study, activated carbon fibers were treated with oxygen plasma to investigate gas sensing properties of the dimethyl methylphosphonate (DMMP), which is a simulant gas of the chemical warfare agent, according to oxygen functional group contents. As the flow rate of oxygen plasma treatment increased, oxygen groups were introduced to the surface of activated carbon fibers from 6.90 up to 36.6%, increasing the -OH group which influences the DMMP gas sensing properties. However, as the flow rate of oxygen plasma increases, the specific surface area tends to decrease because etching on the surface of activated carbon fibers occurs due to active species generated during the oxygen plasma treatment. The resistance change rate of the DMMP gas sensor increased from 4.2 up to 25.1% as the oxygen plasma treatment flow rate increased. This is attributed to the hydrogen bonding between DMMP gas and introduced hydroxyl functional group on activated carbon fibers by the oxygen plasma treatment. Therefore, the oxygen plasma is considered to be one of the important surface treatment methods for detecting chemical warfare agents at room temperature.

• Applied Biological Chemistry
• /
• v.37 no.2
• /
• pp.85-93
• /
• 1994

The fish skin gelatin hydrolysates were produced using a continuous two-stage membrane (MWCO 10,000, MWCO 5,000) reactor, and molecular weights, amino acids and functional properties of the hydrolysates were investigated. The major molecular weights distribution of the major fractions were $8{\sim}10\;KDa$ and $4.5{\sim}6.5\;KDa$ in the 1st-step hydrolysates, $2{\sim}6\;KDa$ and $0.5{\sim}2\;KDa$ in the 2nd-step hydrolysates. Among the amino acids in the hydrolysates, glycine, proline, serine, alanine, hydroxyproline, glutamic acid and aspartic acid having sweet taste were responsible for $68{\sim}72%$ of the total amino acids. But valine, methionine, isoleucine, leucine, phenylalanine and histidine having a bitter taste were only $23{\sim}25%$ Taste evaluations show that the gelatin hydrolysates have a brothy and sweet taste, 2nd-step hydrolysate have more a favorable taste than 1st-step hydrolysate. The hydrolysates were completely soluble and clear over the entire pH range. Moisture sorption at intermediate water activities of the 2nd-step hydrolysate was much higher than the unmodified fish skin gelatin, but foaming and emulsification properties were poor. Buffer capacity of the 2nd-step hydrolysate was higher than the fish skin gelatin and 1st-step hydrolysate, while viscosities of the hydrolysates were lower than the fish skin gelatin.

• Science of Emotion and Sensibility
• /
• v.22 no.4
• /
• pp.3-14
• /
• 2019

The café has become an important representative "third place" where people study and rest. Hence, it is worthwhile for researchers to understand the needs of individual users as well as the requirements of people who visit such venues in groups. The identification of strategies that can help achieve larger, wider, higher, or deeper interior spaces in small and compact locations can generate benefits for both users and designers. In this study, where 56 interior design students participated, we used an eye-tracker and images of cafes to explore the relationships between spatial depth and the intention to visit a cafe space. The researchers digitally developed fifteen different conditions of space and measured the eye movements of the participants using an eye-tracker when they examined images that appeared to convey the most depth. Participants were also asked to imagine the proposed space images as cafes and to select one of the 15 images as the location that they would be most likely to visit individually and one that they would frequent in the company of other people. The research results revealed that certain ways of using interior design elements altered the participants' perceptions of spatial depth without any change being effected to the actual volume or the size of the space. The participants tended to perceive a space with a small decorative artwork on a dark toned wall with unconnected furniture as deeper than a space with no or large artwork on a light toned wall with contiguous furniture. Spatial depth was a more important consideration for an individual visit than for a group visit. The results of this exploratory study will help scholarly understanding of the role played by spatial depth in customer intentions to visit a cafe.

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.645-660
• /
• 1995

The loss of Residual Heat Removal System (RHRS) event during reduced inventory operation for the Korean Standard Nuclear Power Plants (KSNPPS) is simulated by RELAP5/MOD3 and RELAP5/MOD3.1 Tn cases are considered : Base case for an intact Reactor Coolant System (RCS) with no tent and a vent case for an open system. Comparative simulations of base case are peformed by RELAP5/MOD3 and RELAP5/MOD3. 1 computer codes. The results of too simulations are generally in good qualitative and quantitative agreement. However, since the results of RELAP5/MOD3 simulation reveals the deficiency of RELAP5/MOD3 wall heat model, the RELAP5/AOD3.1 computer code is used for the simulation of the vent case. The analysis result of base case show that two steam generators are insufficient to remove decay heat at one day after shutdown, where the RCS is closed. The RCS pressure increased continuously and reached the RCS temporary boundaries design pressure of 0.24 MPa around 4,000 seconds. In the vent case with a flow capacity equivalent to three times the capacity of Pressurizer Safety Valve (PSV), it is shown that the RCS Pressure does not reach 0.24 MPa and core uncovery does not occur until 10,000 seconds. The detailed discussions on the results of this study suggest the feasibility of RELAP5/AOD3.1 as an analysis tool for the simulation of the loss of RHRS event at reduced inventory operation. The results of this study also provide insight for the determination of proper vent capacity.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.494-499
• /
• 2013

Modified polypropylene (m-PP) was fabricated by furfuryl sulphide (FS) as branching agent and m-PP/nano-filler composites were prepared with silicate and multi-walled carbon nanotube (MWCNT), using a twin screw extruder. The chemical structures and thermal properties of the m-PP were investigated by FTIR and DSC. The chemical structure of the m-PP was confirmed by the existence of =C-H stretching peak of the branching agent at 3100 $cm^{-1}$. There was no district change in melting temperature in case of m-PP, but a certain increase in crystallization temperature was notified and the increase was in the range of $10-20^{\circ}C$. The rheological properties, filler dispersion and foaming behaviors of the m-PP/nano-filler composites were investigated by dynamic rheometer, X-ray diffractometer (XRD) and scanning/transmission electron microscope (SEM/TEM). m-PP/nano-filler composites showed a high complex viscosity at a low frequency, an increase in melt elasticity, and a high shear thinning effect. Compared to pure PP, m-PP and m-PP/nano-filler composites were sufficient to enhance the foaming behavior.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.158-163
• /
• 2009

In this study, we synthesized a series of dendritic polystyrene-b-linear poly (t-butyl acrylate) copolymers with well-defined molecular architectures. The hydroxyl group located at the focal point of the second generation dendron bearing polystyrene ($M_n$ = 1000 g/mol) peripheries was converted into amine group via the following stepwise reactions: 1) tosylatoin, 2) azidation, and 3) reduction. On the other hand, the linear poly (t-butyl acrylate)s were prepared by an atom transfer radical polymerization (ATRP) of t-butyl acrylate where benzyl 2-bromopropanoate and Cu(I)Br/PMDETA were used as initiator and catalyst, respectively. To convert the end group of prepared poly (t-butyl acrylate) s into carboxylic acid, a debenzylation was performed using Pd/C catalyst under $H_2$ atmosphere. In the final step, dendritic-linear block copolymers were obtained through a simple amide coupling reaction mediated by 4-(dimethylamino) pyridine(DMAP) and N,N'-diisopropylcarbodiimide(DIPC). The resulting diblock copolymers were shown to have well-defined molecular weights and narrow molecular weight distributions as supported by $^1H$-NMR spectroscopy and gel permeation chromatography(GPC).

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.86-91
• /
• 2005

We present the results of electrical resistivity surveys carried out to estimate the seasonal variation of the water table level in a large-scale landslide area of Tertiary geology in Japan. One long profile, trending NE-SW, was established perpendicular to the main regional geology of the region. Three boreholes are located very close to the profile. The profile was surveyed twice, once before snowfall and once after snow had melted. The relationship between resistivity and water saturation of pyroclastic materials was clarified through laboratory tests. We did this in order to estimate the water content of the pyroclastic layer from the observed resistivity distribution in the landslide area. The resistivity of the saturated pyroclastic deposit calculated using an empirical formula was found to be $570{\Omega}.m$. Based on this computed resistivity, the groundwater level was deduced by assuming that the pyroclastic deposits were fully saturated beneath the water table. We show that the estimated water table before snowfall is lower than that inferred after snow has melted, by about 1.1 to 4.7 m. This suggests that the water table in the upper part of the pyroclastic layer in the landslide area fluctuates greatly, compared to the lower part. This seasonal groundwater fluctuation is possibly caused by the infiltration of water into the subsurface after snowmelt.