• Land and Housing Review
• /
• v.9 no.3
• /
• pp.1-8
• /
• 2018

In Europe and the United States, the use of limit states design has almost been established for pile foundation design. According to the global trend, the Ministry of Land, Transport and Maritime Affairs has established the basic design criteria of the bridge under the limit state design method. However, it is difficult to reflect on the design right now because of lack of research on resistance coefficient of the pile method and ground condition. In this study, to obtain the resistance coefficient of PHC bored pile which is widely used in Korea, the bearing capacity calculated by the LH design standard and the bridge design standard method, the static load test(21 times) and the dynamic load test(EOID 21 times, Restrike 21) The reliability analysis was performed on the results. The analysis of the resistance coefficient of PHC bored pile by loading test was analyzed by adding more than two times data. As a result, the resistance coefficient obtained from the static load test(ultimate bearing capacity) was 0.64 ~ 0.83 according to the design formula and the target reliability index, and the resistance coefficient obtained from the dynamic load test(ultimate bearing capacity) was 0.42~0.55. Respectively. The resistance coefficient obtained from the modified bearing capacity of dynamic load test(EOID's ultimate end bearing capacity + restrike's ultimate skin bearing capacity) was 0.55~0.71, which was reduced to about 14% when compared with the resistance coefficient obtained by the static load test(ultimate bearing capacity). As a result of the addition of the data, the resistivity coefficient was not changed significantly, even if the data were increased more than 2 times by the same value or 0.04 as the previous resistance coefficient. In conclusion, the overall resistance coefficient calculated by the static load test and dynamic load tests in this study is larger than the resistance coefficient of 0.3 suggested by the bridge design standard(2015).

• Membrane Journal
• /
• v.9 no.4
• /
• pp.230-239
• /
• 1999

Perchlorate ion-selective electrodes in PVC membranes that respond linearly to concentration 106 M were developed by incorporating the quaternary phosphonium salts as a canier. The effects of the chemical structure, the contents of canier, the kind of plasticizer and the membrane thickness on electrode characteristics such as the electrode slope, the linear respone range and the detection limit were studied. With this results, the detectable pH range, selectivity coefficients and AC impedance characteristics were compared and investigated. The perchlorate ion substituents of the quaternary phosphonium salts like tetraoctylphosphonium perchlorate (TOPP) , tetraphenylphosphonium perchlorate(TPPP), and tetrabutylphosphonium perchlorate(TBPP) as a canier were used. The electrode characteristics were better in the ascending order of TBPP < TPPP < TOPP, with the increase of carbon chain length of the alkyl group. Dioctylsebacate(OOS) was best as a plasticizer, the canier contents were better with 11.76 wt% and the optimum membrane thickness was 0.19 mm. Under the above condition, the electrode slope was 56.58 mV/$^P{ClO}_4$,the linear response range was $10^{-1}$\times$10^{-6}$ M, the detection limit was 9.66 x $10^{-7}$ M. The performance of electrode was better than Orion electrode. The electrode potential was stable within the pH range from 3 to 11. The order of the selectivity coefficients for the perchlorate ion was sol < F < Br < 1. With the result of impedance spectrum, it was found that the equivalent circuit for the electrode could be expressed by a series combination of solution resistance, parallel circuit consisting of the double layer capacitance and bulk resistance and Warburg impedance. And solution resistance was almost not appeared and Warburg impedance was highly appeared by diffusion. Then Warburg coefficient was 1.32$\times$$10^74 $\Omega$ $\cdot$ ${cm}^2/s^{1/2}$.

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.467-486
• /
• 1993

Today, more chronically ill and handicapped people are being cared for at home by a family member caregiver. The task of caring for a family momber may mean that the caregiver has less time and money and more work which may result in increased fatigue and symptoms of illness. This study was done to examine the well-being of family caregivers. Fifty three family caregivers were interviewed. Concepts were measured using existing tools and included : Burden(25 item 5 point scale), Social sup-port (21 item 7 point scale), Health status defined by a symptom checklist(48 item S point scale), and Well -being defined by a quality of life scale (14 item 7 point scale) and caregiving activities. Data collection was done by interview and Q-sort. Social support and well - being were positively correlated as were symptoms and burden. Symptoms and burden were negatively correlated with social support and well-being. Items on the quality of life scale had a mean score range from 3.09 to 4.96. Quality of life related to income was lowest (3.09) but the desire to use more money for the patient was rated 2.90 on the burden scale where the item means ranged from 0.73 to 3.55. The high mean of 3.55 was for obligation to give care and the low 0.73 was (or not feeling that this was helping the patient. Mean scores for symptoms ranged from 0.26 to 2.15 with the 2.15 being for “worry about all the things that have to be done.” Over half of the patients were dependent for help with some activities of daily living. The caregivers reported doing an average of 3.40 out of five patient care activities including bathing (77.4%), shampooing (67.9%), and washing face and hands (49.1％), and 3.74 out of seven home maintenance activities including laundry (98.1％), cooking (83.0%), and arranging bed-ding(75.5%). The caregivers reported their spouse as one of the main sources of social support, including in times of loneliness and anger The mean score for loneliness as burden was 2.15 and ranked fourth and 31 (58.5％) of the sample reported being lonely recently and not being satisfied with the support received. Similarly anger caused by the patient was given a mean score of 2.13, and anger was reported to have been present recently by 38 (71.7%) of the sample and satis-faction with the support given was low. Having someone to help deal with anger ranked twelfth out of 21 items on the social support scale and had a mean score of 3.98 (range 3.49 to 5.98). Spouses were reported as a major source of social support but the fact that 50% of the caregivers were caring for a spouse, may account for the quality of this source of social support having been affected. These caregivers faced the same problems as others at the same stage of life. but because of the situation, there was a strain on their resources, particularly financial and social. In conclusion it was found that burden is correlated negatively to quality of life and positively to symptoms, but in this sample, symptoms and bur-den were scored relatively low. Does this indicate that the caregivers accept caregiving as part of their destiny and accept the quality of their lives with burden and symptoms just being a part of caregiving\ulcorner Does the correlation between the bur-den and symptoms indicate they are a measure of the same phenomenon or that the sample was of a more mobile, less burdened group of caregivers\ulcorner Quality of life was the one variable that was significant in explaining the varience on burden. Further study is needed to validate the conclusions found in this study but they indicate a need for nurses to ap-proach these caregivers with a plan tailored to each individual situation and to give consideration to interventions directed at improving quality of life and expanding social support networks for those caring for spouses.

• Journal of Korean Academy of Nursing
• /
• v.29 no.1
• /
• pp.161-173
• /
• 1999

The purpose of this study was to develope and test the structural model for quality of life in women having hysterectomies. A hypothetical model was constructed on the basis of previous studies and a review of literature. The conceptual framework was built around eight constructs. Exogenous variables included in this model were marital intimacy, importance of uterus, professional support, positive coping behavior and pre-operative symptoms. Endogenous variables were spouse's support, sense of loss and quality of life. Empirical data for testing the hypothetical model was collected using a self-report questionnare from 203 women having hysterectomies at the outpatient clinics of four general hospitals and a mail survey in Pusan City. The Data was collected from December, 1997 to January, 1998. Reliability of the eight instruments was tested with Cronbach's alpha which ranged from 0.639-0.915. For the data analysis, SPSS 7.5 WIN Program and LISREL 8.12 WIN Program were used for descriptive statistics and covariance structural analysis. The results of covariance structure analysis were as follows : 1. Hypothetical model showed a good fit with the empirical data. ［$\chi$$^2$＝6.93(df＝5, P＝.23), GFI＝.99, AGFI＝.94, RMSR＝.019, NNFI＝.97, NFI＝.98, CN＝440, standardized residuals(-2.14-2.10)］ 2. For the parsimony of model, a modified model was constructed by deleting 3 paths and adding 1 path according to the criteria of statistical significance and meaning. 3. The modified model also showed a good fit with the data. ［$\chi$$^2$＝5.26(df＝7, P＝.63), GFI＝.99, AGFI＝.97, RMSR＝.014, NNFI＝1.02, NFI＝.99, CN＝710, standardized residuals(-1.46-1.70)］ Results of the testing of the hypothesis were as follows : 1. Marital intimacy(${\gamma}$11＝.78, t＝14.37) and professional support(${\gamma}$13＝.12, t＝2.12) had a significant direct effect on the spouse's support. 2. Pre-operative symptoms(${\gamma}$25＝.32, t＝3.12), importance of uterus(${\gamma}$22＝.20, t＝2.61) and spouse's support($\beta$2l＝-.19, t＝-2.43) had a significant direct effect on the sense of loss. 3. Sense of loss($\beta$32＝-.66, t＝-9.83) had a direct effect on the quality of life. Marital intimacy had a direct(${\gamma}$31＝.19, t＝3.33), indirect(${\gamma}$31＝.14, t＝2.52) and total effect(${\gamma}$31＝.25, t＝4.41) on the quality of life. Professional support had a direct effect(${\gamma}$33＝.11, t＝2.07) and total effect(${\gamma}$33＝.13, t＝2.31) on the quality of life. The direct effect of pre-operative symptoms(${\gamma}$35＝-.36, t＝4.02) and positive coping behavior(${\gamma}$34＝.15, t＝2.06) had the insignificant effect on the quality of life while, due to the idirect effect these variables had overall significant effect on the quality of life. The results of this study showed that the sense of loss had the most significant direct effect on the quality of life. Marital intimacy, pre -operative symptoms and spouse's support had a significant direct effect on this sense of loss. These four variables, the sense of loss, marital intimacy, pre-operative symptoms and spouse's support, were identified as relatively important variables. The results of this study suggested that there is needed to determine if nursing intervention would alleviate this sense of loss and promote a greater quality of life in women who have had hysterectomies.

• The Korean Journal of Air & Space Law and Policy
• /
• v.25 no.1
• /
• pp.159-203
• /
• 2010

Together with the development of space science outer space law has become one of the most rapidly developing branches of international law. This reflects a general realization that these new activities must be subject to reasonable legal regulation if they are to serve the peaceful purposes of mankind without undue confusion and disorder. The exploration and use of outer space introduces many novel opportunities and dilemmas, and inspired insights are needed in the development of this new resource. In particular, the settlement of space law disputes is a relatively new discussion in international law. However, the significance of the settlement of space law disputes was acknowledged in various colloquia organized by legal academicians and practitioners around the world. Analysis of the dispute settlement provisions in space agreements plainly reveals the degree to which States persist to be mistrustful of any impingement to their sovereignty. They are reluctant to submit disputes to adjudication and binding arbitration, particularly when these provisions are negotiated between States which have dissimilar political, economic and social interests and demography. However, there is a slow but clear shift in this attitude as States realize the contemporary political, economic and technical pressures necessitating the lifting of the veil of State sovereignty. The development of an effective mechanism for the settlement of disputes arising in relation to the development of the exploration and exploitation of outer space has been the subject of global study by highly qualified publicists and international institutions. The 1972 Liability Convention is the space treaty with the most elaborate provisions for dispute settlement. However, it fails to ensure binding decisions. In this point, the 1998 Taipei Final Draft Convention may be a useful instrument for further consideration on whether an independent sectorialized dispute settlement mechanism should be established. Considering these circumstances it seemed essential to take legislative action to implement a system as comprehensive as the relevant legal framework are in the Law of the Sea and International Criminal Law mechanisms for dispute settlement and conflict avoidance from outer space activities.

• Clean Technology
• /
• v.20 no.4
• /
• pp.375-382
• /
• 2014

This work investigated the plasma-catalytic decomposition of isopropyl alcohol (IPA) and the behavior of the byproduct compounds over monolith-supported metal oxide catalysts. Iron oxide ($Fe_2O_3$) or copper oxide (CuO) was loaded on a monolithic porous ${\alpha}-Al_2O_3$ support, which was placed inside the coaxial electrodes of plasma reactor. The IPA decomposition efficiency itself hardly depended on the presence and type of metal oxides because the rate of plasma-induced decomposition was so fast, but the behavior of byproduct formation was largely affected by them. The concentrations of the unwanted byproducts, including acetone, formaldehyde, acetaldehyde, methane, carbon monoxide, etc., were in order of $Fe_2O_3/{\alpha}-Al_2O_3$ < $CuO/{\alpha}-Al_2O_3$ < ${\alpha}-Al_2O_3$ from low to high. Under the condition (flow rate: $1L\;min^{-1}$; IPA concentration: 5,000 ppm; $O_2$ content: 10%; discharge power: 47 W), the selectivity towards $CO_2$ was about 40, 80 and 95% for ${\alpha}-Al_2O_3$, $CuO/{\alpha}-Al_2O_3$ and $Fe_2O_3/{\alpha}-Al_2O_3$, respectively, indicating that $Fe_2O_3/{\alpha}-Al_2O_3$ is the most effective for plasma-catalytic oxidation of IPA. Unlike plasma-alone processes in which tar-like products formed from volatile organic compounds are deposited, the present plasma-catalyst hybrid system did not exhibit such a phenomenon, thus retaining the original catalytic activity.

• Computational Structural Engineering
• /
• v.7 no.3
• /
• pp.95-103
• /
• 1994

The safety related components in the nuclear power plant should be designed to withstand the seismic load. Among these components the integrity of reactor internals under earthquake load is important in stand points of safety and economics, because these are classified to Seismic Class I components. So far the modelling methods of reactor internals have been investigated by many authors. In this paper, the dynamic behaviour of reactor internals of Yong Gwang 1&2 nuclear power plants under SSE(Safe Shutdown Earthquake) load is analyzed by using of the simpled Global Beam Model. For this, as a first step, the characteristic analysis of reactor internal components are performed by using of the finite element code ANSYS. And the Global Beam Model for reactor internals which includes beam elements, nonlinear impact springs which have gaps in upper and lower positions, and hydrodynamical couplings which simulate the fluid-filled cylinders of reactor vessel and core barrel structures is established. And for the exciting external force the response spectrum which is applied to reactor support is converted to the time history input. With this excitation and the model the dynamic behaviour of reactor internals is obtained. As the results, the structural integrity of reactor internal components under seismic excitation is verified and the input for the detailed duel assembly series model could be obtained. And the simplicity and effectiveness of Global Beam Model and the economics of the explicit Runge-Kutta-Gills algorithm in impact problem of high frequency interface components are confirmed.

• Journal of dental hygiene science
• /
• v.4 no.3
• /
• pp.133-140
• /
• 2004

It examines closely the occupation characteristic primary factor which the dentistry hygienic company field which is working to presence at a sickbed is undergoing the degree and from the research which it sees and it grasps the adaptation method against it gropes bitterly with development of the dentistry hygienic company individual to join in, it contributed in dentistry medical treatment service quality improvement and the research which tries to sleep it attempted. Currently the dentistry hygiene which works from Seoul and the condition area subject matter dentist unit, the dentistry hospital and the general hospital dentistry back it did in the object which it will burn. 116 issues which become frequency in question 120 it used SPSS 10.0 and it analyzed. Result of this study is as following. (1) Was expose that stress degree by factor feels about commonness on the whole, and angle prospects and support connection stress at company were the biggest item by item, and appeared as on the other hand relation connection stress with patient is the smallest. (2) Stress that stress degree by each receives in case of there are a lot of other businesses to characteristic businesses except appeared highest. On the other hand, was expose that feel the lowest stress degree an item that other a type of occupation and discord are. (3) 'Do action of that throw goods or closes the door bump' appeared article highest by short term adaptation method about stress, and 'Think and gives up by fate' appeared highest by special skill adaptation method. Short term adaptation method appeared high than special skill adaptation method on the whole but the difference appeared as is very small. (4) Stress degree comparison by general special quality was shown difference that stress by only dental hygiene administration of justice selection motive keeps in mind. (5) All of the result that compare short term, long term adaptation method about stress that feel new dental higienist apple career dental higienist same difference be, but displayed high result in same munhang. (6) Was expose that difference that keep in mind from all arguments in comparison of short term adaptation method by general special quality does not exist, on the other hand, comparison of long-term adaptation method displayed result that religion among only variable keeps in mind statistically.

• Journal of agricultural medicine and community health
• /
• v.36 no.2
• /
• pp.87-100
• /
• 2011

Objectives: This study aimed to identify factors associated with smoking relapse. Methods: The study sample was recruited among subjects who were enrolled in the smoking cessation clinic of a public health center and had succeeded in quitting smoking for at least six months. A total of 159 male subjects were followed via mail survey one year later. The independent variables in the analyses were socio-demographic characteristics, smoking history and behavior, receipt of smoking cessation aids, health behaviors and components of the health belief model (HBM). The dependent variable was smoking relapse assessed one year after quitting. Ordered logit regressions were used to identify factors associated with smoking relapse. Results: The relapse rate of the ex-smokers in our sample was 25.8%, and the occasional smoking rate was 17.0%. Univariate analyses revealed that only factors related to the HBM, such as perceived susceptibility to diseases (p<0.01), perceived severity of diseases (p<0.01), perceived health benefits of not smoking (p<0.01), perceived barriers to quitting smoking due to increasing stress and difficulty in social life (p<0.01), and self-efficacy (p<0.01) were associated with the likelihood of relapse for ex-smokers. Ordered logit analyses yielded two significant factors affecting the likelihood of relapse, the perceived barriers to quitting smoking and self-efficacy. Conclusions: Our results indicate that higher levels of barriers to quitting smoking and lower levels of self-efficacy were significantly related to risk of smoking relapse. These findings may be useful for identifying those at highest risk for relapse and choosing the optimal strategies for prevention of relapse for ex-smokers.

• Clean Technology
• /
• v.22 no.2
• /
• pp.132-138
• /
• 2016

The emission of SO₂ is inevitable in case of combustion of most fossil fuels except LNG in commercial power plant which has a bad effect on the durability of SCR catalyst. To develop a low temperature SCR catalyst which has a high NOx removal performance and excellent durability to SO₂, V₂O₅/TiO₂ catalysts were prepared by coating on the metal foam substrate with the impregnation amount of Sb₂O₃ as promotor. This study has evaluated the NOx removal performance and the durability to SO₂ on a laboratory scale atmospheric reactor and analyzed the properties of the prepared catalysts by means of porosimeter, BET, SEM (scanning electron microscope), EDX (energy dispersive x-ray spectrometer), XPS (X-ray photoelectron spectroscopy). It was found that the surface area of catalyst increased with the impregnation amount of Sb₂O₃ and the NOx removal performance showed the highest value at the 2 wt% impregnation of Sb₂O₃. This results was considered to be due to the optimum active site on the catalyst surface. And also, Sb₂O₃ impregnated catalysts presented that NOx removal performance was maintained despite the exposure to SO₂ for 5 hours. Therefore it was confirmed that metal foam SCR catalyst for low temperature could be manufactured with the optimum control of Sb₂O₃ impregnation according to the SO₂ presence or not.