• Fashion & Textile Research Journal
• /
• v.16 no.5
• /
• pp.811-821
• /
• 2014

The purposes of this study were to investigate difference on recognition, preference, satisfaction and possession of functional textile clothing in psychological comfort groups according to gender and age of the elderly and suggest optimal physical, mental and healthy functional textiles for the elderly. The data was collected from 262 respondents in their age of over 55, who lived in Busan. SPSS 21.0 was used and t-test, cross tabulation analysis, frequency analysis, and descriptive analysis were performed for analysis. The results are as follows. First, high groups of psychological comfort for both gender and age of the elderly showed higher recognition and preference of functional textiles, especially in the high groups of the new silver generation and women. Second, the high groups of psychological comfort for both gender and age of the elderly showed higher satisfaction of functional textiles. However, it was lower than preference of functional textiles. Last, the possession of major clothing function over all the elderly was comfort, fitting motion adaptability, and health safety function in order. Low groups of psychological comfort possessed fitting motion adaptability textile clothing more than the high groups, and the high groups of psychological comfort possessed comfort and health safety textile clothing more than low groups. In conclusion, this research showed the importance of functional textiles for the elderly in terms of psychological comfort as well as the need for healthy comfort textiles for the advanced activities of daily life.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.476-484
• /
• 2014

The purpose of this study was to investigate the dyeing properties and anti-microbial ability of silk and wool fabrics dyed with Terminalia chebula Retzius(TCR) extract using two extraction solvent, hot water and methanol. Dyeing properties of fabrics were studied by investigating the characteristics of colorant, changes in dye uptake under different dyeing conditions, and by investigating color change when mordants were applied. Also, color fastness, and antimicrobial activity of dyed fabrics were estimated. Regardless of extraction solvent type, colorant showed maximum absorption wavelength at 280 nm and 578 nm, which implied that tannin was the major pigment component of TCR. Also, through FT-IR spectrum result, it was confirmed that tannin of TCR methanol extract was hydrolysable tannin. But for the hot water extract, it was only assumed that its tannin was condenced tannin. Fabric dyed with hot water solvent extract showed higher dye uptake than fabric dyed with methanol solvent extract, dye uptake increasing by higher concentration of the dye, longer dyeing time and higher dyeing temperature. And the absorption curve between TCR extract and protein fiber was shaped in the form of Langmuir adsorption isotherm. Fabric dyed without mordant was yellow in color, and when dyed with mordant, fabric showed various colors depending on mordant types except Sn. Color fastness to washing was generally fine and color fastness to light was moderate. But color fastness to rubbing and dry cleaning was outstanding. Lastly, dyed fabrics showed very good antimicrobial activity of 99.9% against Staphylococcus aureus and Kiebsiella pneumoniae.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.462-468
• /
• 2014

This study investigates the dyeability of soybean protein fabric after dyeing with gallut. In this study, the colorants of gallnut were extracted with boiling water at $60^{\circ}C$ and 60min. Soybean protein fabric was dyed with extracted solution from gallnut according to concentration, temperature and time. After dyeing with gallut solution, dyeability (K/S) was obtained by CCM observation. Al, Cu and Fe were employed as a mordanting agents. Various color changing were produced by the interactions of mordants that were different from soybean protein fabric; however, Al mordant was not indicated as a variable color change. Fastness to washing and light were also investigated. Consequently, the dyeability of the soybean protein fabric dyed with gallut showed reasonable results at 100% o.w.f, $90^{\circ}C$, for 60min. Fastness to washing according to concentration indicated good result as more than grade (4-5) in general. Fastness to light was almost the same compared to fastness to washing at all concentrations. Fastness to washing according to mordants indicated good grade (4) in principle at Al, Cu, and Fe; in addition, fastness to light indicated a good grade too. Fastness to light also indicated the highest dyeability at Fe mordant. This study shows that gallut is a reasonable dyestuff to soybean protein fabric and that it is possible to manufacture a variety of products that use soybean protein fabric.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.2
• /
• pp.158-166
• /
• 1999

The purpose of this study was to investigate the correlation between airborne total dust and man-made mineral fibers (MMMF), and to estimate total dust concentration to maintain below the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV$^{(R)}$) for the MMMF. The regression coefficients between airborne total dust concentrations and fiber concentrations determined in the industries producing glass fibers, rock wool. refractory ceramic and continuous filament glass fibers products were 0.41, 0.42, 0.20 and 0.19, respectively. The size characteristics of fibers as well as the amounts of contaminated non-fibrous dusts could affect the correlation intensities. When total dust and fiber exposure data were compared with the occupational exposure limits, there was a large gap between two evaluation results. The regression coefficient between total dust and fiber data was increased ($r^2=0.88$) in the process of insulation installation generating in the higher levels of glass or rock wool fibers. In this case, an estimated total dust concentration of glass wool or rock wool fibers complying with the ACGIH TLV (1 f/cc) was $1.7mg/m^3$. In conclusion, the total dust and fibers concentrations was highly correlated at the higher exposure levels so that total dust-monitoring data could be used to control simply and economically and to estimate worker's exposure to fibers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.4
• /
• pp.301-308
• /
• 2012

Objectives: To evaluate the pulmonary toxicity of 2 Korea asbestos(chrysotile, anthophyllite), Sprague-Dawely rats were exposed to 2 mg domestic asbestos by intratracheal instillation(IT). Methods: Lung function of rats was analyzed by pressure transducer(MAX1320, Buxco Electronics, USA). The effects of 2 mg asbestos(chrysotile ; $8,814,244{\times}10^{6}$ fibers/mg, average diameter 0.08 ${\mu}m$, average length 4.39 ${\mu}m$, anthophyllite ; $5,182{\times}10^{6}$ fibers/mg, average diameter 0.95 ${\mu}m$, average length 7.29 ${\mu}m$) on pulmonary function and pathological changes were evaluated at after a single IT. Lung function and histopathological evaluation were assessed in 5 animals from each group at each time point. Results: Due to differences in fiber numbers, chrysotile induce marked lung pathology and lung function change than anthophyllite at the same mass dose. Chrysotile showed notable thickening of interstitial areas surrounding the alveolar ducts and terminal bronchioles. Conclusions: On a mass dose basis, chrysotile that have 1,700 times numbers of fibers per unit weight than anthophyllite produced a greater persistent lung injury than anthophllite for at least 4 weeks after exposure.

• Fashion & Textile Research Journal
• /
• v.19 no.1
• /
• pp.90-100
• /
• 2017

In this research, consumer awareness investigation and wearing test were carried out for obtaining useful data on the development of thermo-sensitive functional clothing material. A survey involved 216 people in Seoul and Kyeonggi-do, and 200 questionnaires data were analyzed by descriptive statistics and frequency using SPSS 17.0. Four healthy men in twenties were participated for wearing test. Subjects in normal loungewear were exposed to temperature change from the initial temperature $30^{\circ}C$ down to $5^{\circ}C$ for an hour in a climate chamber. The environmental temperature, surface temperature of garment and skin were measured. As a result, most of respondents have all season clothing products such as underwear, hosiery, and jogging suit for loungewear. Also, thermo regulator y functional clothes are frequently used as underwear and sweat shirt. The consumer awareness investigation on thermo regulatory functional clothing showed that the most important key buying factor is quick climate temperature response, easy maintenance, design and cost, in that order. Surface temperature of garment went down with the cooling down of environmental temperature. The lower environmental temperature, the greater temperature difference by body part showed. Skin temperature change by environmental temperature showed similar tendency of garment surface temperature. In comparison between garment surface and body skin, temperature difference became larger under the lower environmental temperature.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.174-183
• /
• 2015

Objectives: The objective of this study is the estimation of factors influencing airborne fiber concentrations by means of an observation survey of asbestos-containing materials in buildings. Methods: Forty-five samples were collected from four commercial buildings by NIOSH Method 7400 and classified according to current condition, potential activity, construction year, and operations and maintenance(O&M). Results: Airborne fiber concentrations by current condition(classified as good, fair and poor) were significantly different(p<0.05). Concentrations by potential activity were significantly different among groups(p<0.05), and those from the low activity group were higher than those from the middle activity group. Based on construction year, airborne fiber concentrations from the decade of the 1990's were higher than those from the 1960's. When O&M status was considered, airborne fiber concentrations from 1960's buildings were lower than those buildings not operated and maintained(p<0.01), because dust generation was influenced by O&M status. It was found that airborne fiber concentrations were related to current condition and potential activity via regression analysis, but the coefficient of determination was low. Also, correlation analysis showed that the higher the potential activity, the more current condition is worsened, but the relationship was not significant(r=-0.455, p>0.05). Conclusions: Airborne fiber concentrations in asbestos-containing buildings had weak relationships with current condition and potential activity.

• Fashion & Textile Research Journal
• /
• v.13 no.3
• /
• pp.373-381
• /
• 2011

This study focused on investigating factors of partnership formation for transactional enterprises on supply chain to form a transactional relationship centering around textile industry in Daegu and Gyeongbuk. The study also investigated the effect of the factors of partnership formation for mutual cooperation among textile manufacturers in Daegu and Gyeongbuk on partnership outcomes, and finally provided basic information that help enterprises form efficient partnership relationships with related manufacturers. The sample of the study was manufacturers of yarn, dyeing, weaving, process and fabrics in Daegu and Gyeongbuk that are registered on Korea Federation of Textile Industries. The total of 81 responses were used for data analyses, and factor analyses, regression analyses, and ANOVA were utilized appling SPSS 14.0 Package. The results of the research were as follows: First, among partnership formation factors mutual confidence was highly related to presentation of exclusive technological information, efforts to keep relationships between enterprises, presentation of information, and transactions between reliable enterprises that were formed despite of any losses. Second, it was also important that enterprises exchange and communicate their business goals with partners by having common goals. Third, it was also important that problems and damages were informed to and were shared with transaction companies. If conflicts between enterprises occurred, they can be smoothly solved based on the partnership formation. Fourth, enterprises form partnerships with transaction companies by considering their operation abilities. Fifth, transactions with enterprises which are mutually reliable and have superior technology and information contributed a lot to economic outcome. Lastly, the study revealed that among partnership formation factors mutual confidence to transaction companies influenced outcome of mutual confidence profit creation, outcome of technology & information efficiency were closely related to the ability to solve generated problem, and an important factor of the outcome of technology & information profit creation was communication.

• Fashion & Textile Research Journal
• /
• v.13 no.3
• /
• pp.438-444
• /
• 2011

Bamboo leaves, as natural dye provide unartificial fresh green, are known for expert property at anti-bacterial, anti-aging, anti-oxidation, skin whitening, moisturizing, peeling of horny, deodorizing and some skin disease like as eczema and inflammation without any allergic response. Also, It is quite common to obtain bamboo leaves from our surrounding but most of them were not in use. On purpose of development the way of recycle with common material to dye, bamboo leaves were used to dye on ramie fiber which is valuable for both of apparel and industrial field and investigated their dyeing property. Using extract from bamboo leaves, dyeing property was examined with dyeability, colorimetric property, light fastness and wash fastness under different conditions by extract density, dyeing time, dyeing method and mordants. As results, dyeing was generally colored in yellowish, K/S Value was shown more higher on hemp fiber than ramie. The most optimum dyeing condition was investigated on pre-mordant treatment, dyeing temperature $60^{\circ}C$, dyeing time 30min and extract density 400%. On the treatment with mordant(Al, Fe, Cu), dyebility on both of hemp and ramie fiber were increased by mordant. Especially with Copper(Cu) as mordant, dyebility was highly increased than any other mordants and dyeings showed in deep color. Also on the fastness test which is the most important to natural dyeing, wash-fastness showed good performance with 4-5 grade but light-fastness was above 4 grade on both of hemp and ramie fiber, lower than wash-fastness overall.

• Fashion & Textile Research Journal
• /
• v.22 no.4
• /
• pp.534-539
• /
• 2020

Experimental research is needed to provide information on the removal of bloodstains since washing clothes contaminated with blood is necessary for medical related fields (such as ambulance workers and doctors) as well as for women of childbearing age. This study investigated efficient washing conditions for the removal of bloodstains with a focus on washing temperature, fiber type and blood ageing time. Polyester/cotton fabric showed the highest detergency from among three fabrics that were influenced by the composition of the fiber and the structure of the yarn and fabric. When examining the effect of detergent, it was concluded that the alkalinity over pH 10 was essential to remove bloodstains and that auxiliary agents such as soil antiredeposition agents and bleach had a significant effect on the removal of bloodstains. Washing temperature showed the highest detergency at 20℃ due to the activity of the enzyme without the denaturalization of blood. Blood-ageing influenced detergency by inducing changes in the adsorption area and chemical bond. A combination of methods such as quick removal after contamination, use of alkaline detergents including soil antiredeposition agents and bleach, and low-temperature washing could help remove bloodstains.