• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.229-236
• /
• 2018

A customized cleaning agent was investigated for improving the performance decreased by the pollution of collecting plates in an electric fume collector (EFC) which was developed and applied for the purification of effluent gas including oil mist from the textile industry. The pollutants on the surface of collecting plates were blackened by the condensation of oil mist for a long time and difficult to remove by general cleaning agents. The composition of an optimized cleaning agent consisted of alkali, alcohol, glycol and non-ionic surfactant sources was determined by considering the pollutant properties and effect on the damage of the basic metal of collecting plate and so on. The developed cleaning agent solution diluted by 9.1% was applied to the field test, and also the pollutants strongly adhered on collecting plate surfaces were successfully removed by a simple spraying method. The effluent gas purification efficiency of EFC increased significantly by cleaning of collecting plates.

• Food Science and Industry
• /
• v.52 no.4
• /
• pp.358-374
• /
• 2019

Indigestible carbohydrates as dietary fiber have attracted interest of consumers due to their several physiological benefits. Recent definitions of dietary fiber have included other indigestible carbohydrates such as resistant starch and resistant maltodextrins, which are natural, colorless, odorless and tasteless low-calorie food ingredients. Unlike some carbohydrates and digestible starches, indigestible starch and maltodextrin resist enzymatic hydrolysis in the upper gastrointestinal tract, resulting in little or no direct glucose absorption. In addition, there is increased microbial fermentation production of short-chain fatty acids in the large intestine. As an emerging functional low-calorie food ingredient, resistant starch and maltodextrin have been shown to have equivalent or superior impacts on human health compared to conventional fiber-enriched food ingredients. In this paper, the definition, strategies to enhance dietary fiber content in foods, some potential health benefits, and applications in food industry for indigestible starch and maltodextrin are summarized and discussed.

• Membrane Journal
• /
• v.32 no.2
• /
• pp.100-108
• /
• 2022

Among various industries, the textile industry uses the largest amount of water for coloring textiles which leads to a large amount of wastewater containing various kinds of dye. There are various methods for the removal of dye such as flocculation, ozone treatment, adsorption, etc. But these processes are not much successful due to the issue of recycling which enhances the cost. Alternatively, the membrane separation process for the treatment of dye in wastewater is already documented as the best available technique. Polymeric membrane and ceramic membrane are two separate groups of separation membranes. Advantages of ceramic membranes include the ease of cleaning, long lifetime, good chemical and thermal resistance, and mechanical stability. Ceramic membranes can be prepared from various sources and natural materials like clay, zeolite, and fly ash are very cheap and easily available. In this review separation of wastewater is classified into mainly three groups: ultrafiltration (UF), microfiltration (MF), and nanofiltration (NF) process.

• International Commerce and Information Review
• /
• v.17 no.1
• /
• pp.309-337
• /
• 2015

Recently, Korea had virtually reached an FTA deal with China on November 10, 2014 after the 14 rounds of negotiation during past two and half years. The two countries agreed to the FTA's 22 chapters, including products, services, investment, e-commerce, finance, communication, and other trade issues, but rice and several sensitive agricultural and fisheries products were excluded from the deal. Korea and China will remove their import tariffs on more than 90 percent of all products and more than 85 percent of imports by value within 20 years once the FTA is implemented. This paper intends to analyze the impacts of Korea-China FTA on the major industries in Daegu-Gyeongbuk region. Considering the statistics on the bilateral trade between China and Daegu-Gyeongbuk region, import tariff rates of the two countries, trade specialization indices of the major industries, and the package of Korea-China FTA deal, this study investigated the sectoral effects of Korea-China FTA on the four main industries, textiles, electrical-electronics, machinery and auto parts, and steel and iron industries in that region.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.357-363
• /
• 2016

To solve the exhaustion problem of natural aggregate which were create the high value in construction and environmental industry, recycled aggregates have considerable benefits than other materials. However, even though many researches have been conducted with recycled aggregates, building structures with recycled aggregated are rarely constructed because it has lower quality than natural aggregates have. In this study, mechanical and strain properties of recycled aggregates concrete containing steel fibers have been reviewed in order to complement performance of recycled aggregates concrete. As results, recycled aggregates concrete showed lower compressive strength and elastic modulus than plain concrete. But, recycled aggregates concrete containing steel fibers showed equivalent performance with plain concrete. In review of drying shrinkage and creep coefficient, recycled aggregates concrete containing steel fibers showed similar behavior with plain concrete in the range of 0.5 Vol.% fiber content rate by internal restraint effect, moisture transport restraint effect and strength enhancement effect of steel fiber. Therefore, it is considered that mixing steel fibers with concrete is the effective method as a active application plan for recycled aggregates.

• Composites Research
• /
• v.14 no.2
• /
• pp.8-12
• /
• 2001

Filament Winding Process is a comparatively simple operation in which continuous reinforcements in the form of roving are wound over a rotating mandrel. It is well established and versatile method for storage tanks and pipes for the chemical and other industries. In this study, tensile strength of a filament wound ring specimens were evaluated by a split disk test fixture and a dress disk test fixture. The results obtained from experiments were compared with the theoretical values from the rule of mixtures. The purpose of this paper is the suggestion of an appropriate test method for the evaluation of tensile properties of filament wound structures. The tensile strength of a ring specimen tested by the dress disk test showed better agreement with the theoretical values than those tested by the split disk test because of higher stress concentration in edges of a split disk test fixture. The results showed that the tensile strength of a ring specimen was influenced by the geometry of test fixture, the continuity of fibers, fiber-tension, fiber-end and stress concentration in specimen.

• Journal of Digital Convergence
• /
• v.13 no.2
• /
• pp.401-406
• /
• 2015

The aim of present study is to investigate antioxidative effect of the Rice Bran Extracts and Defatted Rice Bran Extracts. Rice Bran Extracts used Rice Bran Water Extract, Rice Bran Ethanol Extract, Defatted Rice Bran Water Extract, Defatted Rice Bran Ethanol Extract. This study was carried out to examine quenching effects of Rice bran extracts on DPPH-, Riboflavin-, and Xanthin oxidase- originated superoxide activities. In addition, in order to determine whether Rice Bran Extract can be safely applied to human skin, the cytotoxic effects of Rice Bran Extract in Human Dermal Fibroblast cells were determined using MTS Assay. These results demonstrated that RBE and DRBE had anti-oxidative properties and did not induce the cytotoxic effects in Human Dermal Fibroblast cells. Therefore, these findings suggest that anti-oxidative properties of RBE and DRBE may be considered convergence with skin care.

• Elastomers and Composites
• /
• v.46 no.1
• /
• pp.10-21
• /
• 2011

Recently, with developments in the automotive industry, sound and vibration damping have a considerable attraction with a diversified customer needs and advanced automobile. In general, among various materials, textile materials, such as felt and glass fibers, polyurethane foam, and PET fiber materials were used to reduce sound and vibration of the automobile. These materials were located in various main parts of the automobile to block sound and vibration, resulting in a comfortable ride. In addition, to improve fuel economy, weight reduction and cost saving for the automobile were also being considered together as well as the reduction of sound and vibration of the automobile. Therefore, in this paper, we focused on the need of interior sound and vibration absorption materials in the automobile and absorption materials-related technologies.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.198-204
• /
• 2019

Polymer composites are widely used as industrial materials requiring high mechanical properties. Glass fibers and fillers, which are used as a reinforcement in composites, usually have some problems such as nonuniform dispersion and poor interfacial adhesion. In this study, an acrylic acid-modified polyethylene wax was synthesized by the sequential reaction of pyrolysis of polyethylene followed by grafting with a polar acrylic acid. The acrylic acid-modified polyethylene wax was applied to polymer composites of the polyamide matrix and glass fiber reinforcement. The effect of acrylic acid-modified polyethylene wax on physical properties of polyamide based composites was thoroughly investigated.

• Composites Research
• /
• v.35 no.2
• /
• pp.106-114
• /
• 2022

Carbon fiber-reinforced plastic, well known high specific strength and high specific stiffness, have been widely used in the aircraft industry. Mostly the CFRP structure is fabricated by lamination of carbon fiber or carbon prepreg, which has major disadvantage called delamination. Delamination is usually produced due to absence of the through-thickness direction fiber. In this study, three-dimensional carbon preform woven in three directions is used for fabrication of aircraft wing unit structure, a part of repeated structure in aircraft wing. The unit structure include skin, stringer and rib were prepared by resin transfer molding method. After, the 3D structure was compared with laminate structure through compression test. The results show that 3D structure is not only effective to prevent delamination but improved the mechanical strength. Therefore, the 3d preform structure is expected to be used in various fields requiring delamination prevention, especially in the aircraft industry.