• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.187-199
• /
• 2016

In this study CALPUFF modeling was performed to predict a contribution of a separate single point pollutant source as well as of total point pollutant sources of major synthetic fiber manufacturers in Gumi national industrial complex to atmospheric trimethylamine concentration of the same area. In addition, a contribution of the separate single point pollution source to the atmospheric trimethylamine concentration of the same area was estimated relatively to the total point pollutant sources. As a result of the CALPUFF modeling, the maximum atmospheric concentration of trimethylamine in Gumi national industrial complex was appeared upon improving T company emission facility frequently in complex 3 in winter (January) and spring (April) while frequently in complex 1 in summer (July) and autumn (October). Besides, the predicted range of the maximum atmospheric concentration of trimethylamine in complex 1 was improved upon improving its emission facility. However, even though in complex 3 the upper bound of the predicted maximum atmospheric concentrations of trimethylamine was increased upon improving T company emission facility, the predicted value of their second upper bound below the upper bound was very similar to the upper bound of measured atmospheric trimethylamine concentrations in Gumi prior to improving its emission facility. Thus, the effect of improving T company emission facility was estimated huge in complex 1 while it was trivial in complex 3. These maximum concentrations of trimethylamine predicted to estimate the expected contribution of total point pollutant sources by CALPUFF modeling showed the similar values to those measured in the region of Gumi. Therefore, the expected contribution of total point pollutant sources to atmospheric trimethylamine concentration in the area of Gumi was validated.

• Food Science and Industry
• /
• v.50 no.2
• /
• pp.37-51
• /
• 2017

Food packaging strategies have steadily improved with increasing demand for improved food safety, convenience, and shelf life. The development of edible film has been hailed as a technology substituting packaging using synthetic plastics. There has been a surge for research to develop antimicrobial edible films and coatings that can increase microbiological safety while preserving foods. This review addresses recent results that are useful in advancing and extending research into antimicrobial edible films. In this review, we suggest the trend of the development of antimicrobial edible film/coatings by outlining edible film materials, antimicrobial substances, antimicrobial and physical properties of the films, commercial antimicrobial edible films, and methods to statistically predict the efficacy of antimicrobial edible film/coatings, reported in recent studies.

• Smart Media Journal
• /
• v.12 no.7
• /
• pp.43-51
• /
• 2023

As online transactions increase, the image of clothing has a great influence on consumer purchasing decisions. The importance of image information for clothing materials has been emphasized, and it is important for the fashion industry to analyze clothing images and grasp the materials used. Textile materials used for clothing are difficult to identify with the naked eye, and much time and cost are consumed in sorting. This study aims to classify the materials of textiles from clothing images based on deep learning algorithms. Classifying materials can help reduce clothing production costs, increase the efficiency of the manufacturing process, and contribute to the service of recommending products of specific materials to consumers. We used machine vision-based deep learning algorithms ResNet and Vision Transformer to classify clothing images. A total of 760,949 images were collected and preprocessed to detect abnormal images. Finally, a total of 167,299 clothing images, 19 textile labels and 20 fabric labels were used. We used ResNet and Vision Transformer to classify clothing materials and compared the performance of the algorithms with the Top-k Accuracy Score metric. As a result of comparing the performance, the Vision Transformer algorithm outperforms ResNet.

• Resources Recycling
• /
• v.32 no.6
• /
• pp.3-9
• /
• 2023

Separation of LED packages from PCBs and analysis of the adhesive components was conducted to enhance the recycling potential of LED modules. LED package was separated from PCBs using heat treatment under optimal conditions: temperature of above 250 ℃ and time of 20 minutes. The separation equipment can be established using a hot air injector with controlling the rotational speed of the internal screw. The separation efficiency of each type of substrate (aluminum and glass fiber) was investigated with the thickness range of the adhesive materials (0.25-0.30 and 0.30-0.35 mm). Under the optimal conditions, the efficiency can reach to 97.5% for both types of substrates with adhesive materials of thickness 0.25~0.30mm. Characterization of the residual adhesive substances from the separated LED package and PCB using microwave digestion and ICP analysis showed that the residue contained of 95% of Sn, less than 5% of Cu and Ag.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.3
• /
• pp.534-546
• /
• 2023

In this study, we investigated the antioxidant and anti-winkle activity in human fibroblast cell (CCD-986sk) of Persimmon Leaves (PL) as a cosmetic ingredient. As a result of investigating antioxidant activity through electron-donating ability and ABTS⁺ radical scavenging assay, the PL showed concentration-dependent antioxidant activity similar to ascorbic acid, a control group, at a concentration of 1,000 ㎍/ml. As a result of investigating the anti-wrinkle effect through elastase inhibition and collagenase inhibition assay, the PL showed concentration-dependent antioxidant activity similar to epigallocatechin gallate, a control group, at a concentration of 1,000 ㎍/ml. As a result of measuring the synthesis rate of pro-collagen type I and the inhibition rate of MMP-1 in UVB-induced CCD-986sk cells, the control group EGCG showed a 90.2% pro-collagen synthesis rate at 20 ㎍/ml and PL showed an 88.5% synthesis rate at 30 ㎍/ml. In addition, the inhibition rate of MMP-1 of 33.0% and 40.8% were confirmed in EGCG 20 ㎍/ml and PL 30 ㎍/ml, respectively. As a result of measuring the protein expression of pro-collagen type I and MMP-1 in the PL through western blot, it was confirmed that the protein expression of pro-collagen type I increased, and MMP-1 decreased when the PL was treated together compared to the UVB alone group. According to the above experimental results, it is expected to be used as a natural product material for cosmetics by confirming that the PL prevent photoaging caused by UVB stimulation and have antioxidant and anti-wrinkle effects.

• Korean Journal of Plant Resources
• /
• v.32 no.4
• /
• pp.355-378
• /
• 2019

We investigated the flora of vascular plants in Mt. Papyeong which is located in the northern part of Paju and the border of western DMZ through 13 surveys from April 2016 to August 2019. The vascular plants of Mt. Papyeong include 410 taxa; 361 species, 9 subspecies, 36 varieties, and 4 forms from 257 genera of 91 families. Among 410 taxa, we characterize endemic species, rare and endangered plants, floristic regional indicator plants, and climate change adapted plants in Korea. Specifically, there are 9 Korean endemic plants designated by Korea National Arboretum and 6 taxa by Korean Ministry of Environment. According to IUCN evaluation, there are 13 rare and endangered plants in Mt. Papyeong. On the other hand, 2 taxa were listed in a red list suggested by Korean Ministry of Environment. The floristic regional indicator plants include 46 taxa which are composed of 2 species of IV degree, 13 taxa of III degree, 11 taxa of II degree, and 20 taxa of I degree. Also, 27 naturalized plants were identified, and the percentage of Naturalized Index (NI) and Urbanization Index (UI) were 6.58%, and 8.43%, respectively. We hope that this investigation provide a valuable data for applying the further studies on the biodiversity and strategy of conservation of environment in the DMZ and Paju areas.

• Clean Technology
• /
• v.22 no.1
• /
• pp.16-28
• /
• 2016

Textile industry is considered as one of the most polluting sectors in terms of effluent composition and volume of discharge. It is well known that the effluents from textile dying industry contain not only chromatic substances but also large amounts of organic compounds and insolubles. The azo dyes generate huge amount of pollutions among many types of pigments. In general, the electrochemical treatments, separating colors and organic materials by oxidation and reduction on electrode surfaces, are regarded as simpler and faster processes for removal of pollutants compared to other wastewater treatments. In this paper the electrochemical degradation characteristics of dye wastewater containing CI Direct Blue 15 were analyzed. The experiments were performed with various anode materials, such as RuO₂/Ti, PtO₂/Ti, IrO₂/Ti and graphite, with stainless steel for cathode. The optimal anode material was located by changing operating conditions like electrolyte concentration, current density, reaction temperature and initial pH. The degradation efficiency of dye wastewater increased in proportion to the electrolyte concentration and the current density for all anode materials, while the temperature effect was dependent on the kind. The performance orders of anode materials were RuO₂/Ti > PtO₂/Ti > IrO₂/Ti > graphite in acid condition and RuO₂/Ti > IrO₂/Ti > PtO₂/Ti > graphite in neutral and basic conditions. As a result, RuO₂/Ti demonstrated the best performance as an anode material for the electrochemical treatment of dye wastewater.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1562-1570
• /
• 2005

The purpose of this thesis is to find the effective way of practical education in the fashion related department in order to supply the appropriate experts to the Korean apparel manufacturers located in Dalian, China. The interviews were made twice from $25^{th}$ of Feb. to $15^{th}$ of Mar. 2005 and from $28^{th}$ of July to 31st of July 2005 through the method ot a direct interview with the CEOs of the 7 representative apparel manufactures. The results of the interviews were as following. Seven companies$(100\%)$ participated in the survey all complained of insufficient workers. Also the companies were having difficulties at finding appropriate workers who can handle designing, management, and circulation, because specialists who are fluent in Korean and Chinese are very rare. Moreover, Korean apparel manufacturers are now taking a step further to launch a high quality fashion brand, getting out of the simple hand work depending on low wage or low-tech(6 companies $85.7\%$). Thus, well-educated fashion specialists(intermediate manager) are required on the part of Korean clothing companies or apparel manufacturers in China. It is expected the intermediate managers and the specialists who are capable of launching a new brand will be urgently needed. Therefore, appropriate educations in Korea would be essential to minimize the problems the Korean fashion specialists might face in China. 1 would like to present three suggestions. 1. The highly educated Korean fashion specialists on apparel industry will be a solution both to the high jobless status in our country and to the deficiency in human resources of Korean apparel manufacturers in Dalian. 2. The students in the college should learn how to write down the working chart and matching chart in practical conditions. Taking an intern-ship in working factories in China during a certain period of time will be helpful. 3. The experts should be trained with emphasis on the quality, design, and value of the brand. This study will be used as a base for Koreans who work in fashion related department to enter the Chinese fashion market having a great potential.

• Journal of Forest and Environmental Science
• /
• v.19 no.1
• /
• pp.85-98
• /
• 2003

The articles, published in the Journal of Korean Forestry from Number 1(1962) to Number 6, Volume 91(2002), were surveyed and investigated for the research trend analysis about resource-plants for special use or purpose, i. e., edible plants, medicinal plants, feed resource, landscape plants, fiber plants, industrial usuage, and bee plants. If the purpose or subject matter of the research was construction or furniture timber production, mushrooms and/or pulp and paper, such research was not included in this study. These articles were classified again depending on the content of research into 14 categories: habitat environment, ecology, physiology, propagation, silviculture (tending and culture), genetics and breeding, identification, insect and disease control, animal-related research, component analysis, vegetation survey, biotechnology, management, and review. Among the total 1.434 articles published, 396 ones (27.6%) were related with plants for special use or purpose. Vegetation survey was 60 (15.2%): physiology 56(14.1%) : genetics and breeding 56(14.1%): propagation 53(13.4%): and ecology 37(9.3%). Siviculture research field included 11 articles (2.8%), which indicates that the management of resource-plants is so far from economic income as seen in the low number of management research filed articles, i. e., only 6 reports (1.5%) Korean white pine was most popular for research and included 42 articles: Robinia pseudoacacia 23: Castanea crenata 14: and ginkgo tree 14. Research related with these species had focused mainly on propagation, physiology, genetics and breeding, ecology and pest control. Based on this survey and analysis, the followings are suggested: 1. More research is required on forest herbaceous plants. 2. Cooperative research work with other industrial and/or scientific area is recommendable for commercialization including medicine, cosmetics, and food etc. 3. Research on resource-plant conservation, which includes biology, social education and policy, should be supported for next generation. 4. Mutual correspondence and information exchange about the research results between researchers and institutes is more necessary than now.

• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.27-38
• /
• 2016

This study examined the nutrient components and physicochemical properties of Acer termentosum Maxim. leaf as a natural health food source. To accomplish this purpose, the general and antioxidative contents of Acer termentosum Maxim leaf were measured. Total contents of carbohydrates, crude protein, crude lipid, and ash were 53.6%, 24.3%, 3.5%, and 3.5%, respectively. Caloric content of Acer termentosum Maxim was 246.5 kcal, while total dietary fiber was 46.7%. Regarding mineral contents, K was the most abundant mineral, followed by Ca, Mg, and P. Therefore, Acer termentosum Maxim is an alkali material. Total phenol contents of the 70% ethanolic extracts of Acer termentosum Maxim was $116.35{\pm}1.4mg\;GAE/g$. Total flavonoid contents of the 70% ethanolic extracts were $20.3{\pm}1.23mg\;RE/g$. The antioxidative activities of Acer termentosum Maxim. were significantly increased in a dose dependent manner on DPPH(1,1-Diphenyl-2-picrylhydrazyl) radical scavenging, ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt) radical scavenging, FRAP (ferric reducing antioxidant power) activity, reducing power. It is expected that follow up study of Acer termentosum Maxim through developing processed food and evaluation of their functional properties would provide useful information as a source of functional foods.