• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.214-220
• /
• 2023

Poly(vinyl alcohol) (PVA) is a common hydrophilic polymer that is synthesized through the saponification reaction of poly(vinyl ester)-based polymers, mostly using poly(vinyl acetate) (PVAc) as a precursor. The heterogeneous saponification reaction of poly(vinyl ester)-based films leads to PVA films with new surface properties. Cellulose acetate (CA), in which the hydroxyl group of cellulose is replaced by an acetyl group, is a typical cellulose derivative capable of overcoming the low processability of cellulose due to strong hydrogen bonding. In this study, P(VAc/VPi)/CA blended films were prepared by the solvent casting, and then PVA/Cellulose blended films with improved surface properties were prepared by heterogeneous saponification. The structural changes caused by heterogeneous saponification were confirmed by FT-IR analysis, where both saponification and deacetylation reactions occurred in the saponification solution. In addition, the surface property changes were analyzed by FE-SEM and contact angle analyses, and the transmittance changes of the modified films were also assessed.

• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.239-245
• /
• 2023

Cellulose is an abundant biodegradable material in nature with excellent properties, but due to its poor processability, it has been widely studied for processing through modification. Cellulose acetate propionate (CAP) is a cellulose derivative in which the hydroxyl group of cellulose is replaced by acetyl and propionyl groups. CAP has several advantages, such as excellent solubility, structural stability, light and weather resistance, and good transparency. Porous nanofibers with excellent specific surface area, which can be applied in various fields, can be easily formed by the phase separation method using highly volatile solvents. High speed centrifugal spinning is a nano/micro fiber preparation method with advantages such as fast spinning and easy alignment control. In this study, a CAP/polybutylene succinate (PBS) spinning solution with chloroform as solvent was prepared to prepare porous microfibers and the fiber morphology was examined as a function of the disk rotation speed in an high speed centrifugal spinning device.

• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.969-974
• /
• 2022

In order to maximize dynamic range and to minimize image lag in digital X-ray imaging, diminishing residual parasitic capacitance in photodiode in pixels is critically necessary. These requirements are more specifically requested in dynamic X-ray imaging with high frame rate and low image lag for industrial 2D/3D automated X-ray inspection and medical CT imaging. This study proposes duoPIX^TM X-ray imaging sensor for the first time that is composed of reset thin film transistor, readout thin film transistor and photodiode in a pixel. To verify duoPIX^TM X-ray imaging sensor, designing duoPIX^TM pixel and imaging sensor was executed first then X-ray imaging sensor with 105 ㎛ pixel pitch, 347 mm × 430 mm imaging area and 3300 × 4096 pixels (13.5M pixels) was fabricated and evaluated by using module tester and image viewer specifically for duoPIX^TM imaging sensor.

• Composites Research
• /
• v.22 no.2
• /
• pp.1-6
• /
• 2009

The mechanical characteristics of gamma-ray irradiated UHMWPE specimens were investigated under various heat treatment conditions. The heat treatment was performed in the range of annealing and remelting temperatures. The annealing treatment below the temperature of $130^{\circ}C$ hardly induced changes in the tensile strength, the strain at the failure and the hardness. However the remelting treatment above $140^{\circ}C$ deteriorated those mechanical properties. It was shown in an FTIR analysis that the annealing treatment caused some oxidation of free radicals created by the pretreatment of the irradiation. These quantitative data represented by the behavior of mechanical properties might be used as basic informations for the design and analysis of various artificial joints.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.627-632
• /
• 2019

In this study, Laminaria japonica was used as a substrate for a mixed aerobic microbial consortium. Laminaria japonica is well-known as a representative brown algal biomass possessing advantages of cheap cost, and high productivity and carbohydrate content. A biological saccharification system was established by inoculating and enriching the mixed aerobic microbial consortium. Production of the soluble carbohydrate and reducing sugar at different hydraulic retention times (HRT) was observed. The efficiency of saccharification increased according to the decrease of HRT. The maximum saccharification yield in a continuous biological pretreatment process was 17.96 and 4.30 g/L/day for the soluble carbohydrate and reducing sugar, respectively at the HRT of 1 day. In contrast, the staccharification yield decreased drastically at the HRT of 0.5 day. Experimental results indicate that Laminaria japonica is a promising material for the production of useful products, in particular for the saccharification through a biorefinery process. It can thus be concluded that a continuous biological pretreatment process using a mixed cultivation system can be successfully employed for the biorefinery technology.

• Textile Coloration and Finishing
• /
• v.35 no.3
• /
• pp.169-178
• /
• 2023

The extended use of polyester nowadays has increased the amount of waste polyester (PET) released into the environment. Although these materials don't directly harm living things or the ecosystem, their inability to biodegrade remains one of the major global threats, driving up the amount of solid waste made up of PET. Environmental concerns have approved an increasing interest in recycled PET however the production of recycled PET with sufficient mechanical properties is still a challenge. Recycled Polyester (rPET) yarns are inexpensive and have the potential to acquire better mechanical characteristics through physical treatments, particularly by using technically simple method like uniaxial drawing. This study inspected the drawn behavior of virgin PET yarns and rPET yarns under various drawing parameters by first analyzing the initial material characteristics of both yarn. The impact of stretching on mechanical and morphological properties was also investigated. The results showed that virgin PET has better properties than rPET yarn; however, mechanical properties resembling virgin PET are achieved after optimizing the draw ratio.

• The Korean Journal of Food And Nutrition
• /
• v.36 no.4
• /
• pp.244-252
• /
• 2023

This study was conducted to provide basic data on the antioxidant activity, inhibition of adipocyte differentiation and reactive oxygen species (ROS) production of a mixture of Brassica juncea extract (BJE) and fermented black rice fraction (BRF). We investigated the total phenol content, total flavonoid content, antioxidant effects (DPPH radical scavenging, ABTS radical scavenging, reducing power, FRAP and ORAC assay) and anti-obesity activity of the mixture in 3T3-L1 cells. Our results showed that the total phenol and flavonoid content increased with increasing BRF mixture ratio. The antioxidant activity increased as the BRF mixture ratio increased. In addition, BJE and BRF mixtures did not show any cytotoxicity during the 3T3-L1 differentiation period. During adipocyte differentiation, BJE and BRF mixtures significantly inhibited lipid accumulation and ROS production compared to the control group. These results warrant further experiments to develop an anti-obesity functional food using a mixture of BJE and BRF.

• Research in Plant Disease
• /
• v.25 no.1
• /
• pp.29-32
• /
• 2019

Burcucumber (Sicyos angluatus) is a representative ecosystem-disturbing plant in Korea and currently widely spread throughout the country. A sclerotia-forming fungus with moderate host selectivity, Sclerotinia trifoliorum BWC98-105, was tested in the laboratory, green house and natural habitat for its pathogenicity to burcucumber. When mycelial culture fragment was inoculated to burcucumber seedlings under the green house condition, mycelial growth was observed in the following day, and then resulted in the onset of wilting from 5 days after inoculation (DAI). Its characteristic sclerotia as a sign was observed from 7 DAI, and thus plants turned into dark-brown color at the bottom of stem of burcucumber that was eventually blighted at 14 DAI. Similar visible symptoms were observed in natural habitat. Based on the results of showing typical blight symptom to burcucumber and the sign of sclerotia, we report S. trifoliorum BWC98-105 causing stem blight against burcucumber. Its globular pellet was considered of having quite potential as a bioherbicide to control burcucumber in Korea.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.74-87
• /
• 2003

A model of STS (Science-Technology-Society) creativity education program for the gifted and talented children has been developed, based on GENEPLORE thinking process and Knowledge development theory. The GENEPLORE creative thinking process, developed by Finke et al. (1990, 1992), has two phases such as generative phase and exploratory phase. And The knowledge development theories of Piaget (1977) and Gallagher(1981) assume that knowledge-bases are developed on the basis of empirical as well as reflective abstraction, which could imply that knowledge-bases are crucial in creative thinking process. The creativity education model for the gifted and talented of the present study attempted to integrate 'the individual, creative thinking process, and social/scientific technology' by employing topics of the science-technology-society such as computer, network, biotech, robot, e-business, e-education, e-health, nanotech and entertainment and the structure and contents of the program are proposed

• Journal of Life Science
• /
• v.32 no.9
• /
• pp.678-689
• /
• 2022

HK shiitake mushroom mycelium (HKSMM), containing 14% β-glucan, is a health functional food ingredient approved individually for liver health by the Ministry of Food and Drug Safety. The immune-enhancing efficacy of a 50% aqueous ethanol extract of HKSMM (designated HKSMM50) was studied in Jurkat cells activated with concanavalin A (ConA). Active hexose correlated compound (AHCC) was used as a positive control. ConA-activated Jurkat cells were treated with HKSMM50 (0, 25, 50, 100 ㎍ g/ml) or AHCC (100 ㎍ g/ml), and cultured for 3 and 6 hours. The nuclear factor of activated T cells (NFAT) protein content in the cytosol and the nucleus was measured by Western blotting. Interleukin-2 (IL-2), interferon-gamma (IFN-γ), and cyclooxygenase-2 (COX-2) were determined using enzyme-linked immunosorbent assay (ELISA) kits. HKSMM50 lowered NFAT content in the cytosol, but elevated NFAT content in the nucleus. The IL-2 and IFN-γ productions were elevated. Meanwhile, both COX-2 activity and apoptosis were suppressed. The efficacy of the AHCC treatment showed similar to those of HKSMM50 treatments. These results indicate that the HKSMM50 exhibited immune-enhancing effects in ConA-treated Jurkat cells by activation of NFAT protein, and suggest that HKSMM could be used as a health functional food ingredient to improve immune functions in humans.