• Tribology and Lubricants
• /
• v.16 no.2
• /
• pp.7-7
• /
• 2000

Using a coupled thermal-mechanical analysis, the dynamic distortion of the ventilated disk brakes has been presented for a high-speed train. The offset ratio between the maximum and minimum values of the thermal distortions has been analyzed as a function of a braking number. The computed FEM results show that the offset rations in radial direction are much greater than those of circumferentially distorted components. This means that the axial distortions in radial direction may dominantly produce thermally caused wears and cracks at the rubbing surfaces.

• Tribology and Lubricants
• /
• v.16 no.2
• /
• pp.99-105
• /
• 2000

Using a coupled thermal-mechanical analysis, the dynamic distortion of the ventilated disk brakes has been presented for a high-speed train. The offset ratio between the maximum and minimum values of the thermal distortions has been analyzed as a function of a braking number. The computed FEM results show that the offset ratios in radial direction are much greater than those of circumferentially distorted components. This means that the axial distortions in radial direction may dominantly produce thermally caused wears and cracks at the rubbing surfaces.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.82-87
• /
• 2011

In this paper, a sensorless speed control system is designed for the next generation high speed railway at zero and low speed region. The applied vector control scheme is a maximum torque per ampere(MTPA) method to utilize reluctance torque of IPMSM. The designed sensorless control scheme is a rotating high frequency voltage signal injection method. To verify the designed system, a simulator for the vector controller and sensorless controller is implemented using Matlab/simulink.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.6
• /
• pp.94-101
• /
• 2012

In this paper, The Next Generation High Speed Railway inverter system based on IPMSM drives using Random Pulse Position Modulation is proposed to reduce electromagnetic noise. To verify the validity of study, the simulator for the proposed system is designed and impplemented. Simulation program is developed using Matlab/Simulink. The simulation results of the proposed system was compared with the system using conventional method. The results show that the voltage and current harmonics of the proposed Next Generation High Speed Railway Inverter system. significantly decrease and spread into wide band area by the proposed Random Pulse Position modulation technique based on Space Vector Modulation method.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.163-168
• /
• 2001

A FEM-based analytical approach was used to evaluate the fatigue strength of a KHST gangway. A KHST gangway was made of AC4C, 5083-O, 6005A-T6 aluminum alloys. The fatigue strengths of them were obtained from the related code and literatures. The effect of tensile mean stress was taken into account by the modified Goodman diagram, but the effect of compressive mean stress was not considered. There was not any location of a KHST gangway that exceeded the allowable fatigue strengths.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.886-890
• /
• 2003

This paper introduces the combined test results of the traction system for KHST(Korean High Speed Train: hereafter refer to KHST). The main purpose of this combined test is to verify the performance of the traction system that is designed to operate up to maximum 350km/h speed. Combined test system consists of a traction transformer, two AC-DC PWM converters, a PWM Inverter, two traction motors and flywheel system. Flywheel system represents equivalent model of the train inertia. Also traction control system and MASCON Interfaces are included. Various kinds of experiments are performed to prove total traction system performance and detail waveforms are described

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2445-2447
• /
• 2002

In this paper, CAN-based feedback control system is proposed for the pressurization system of korean high-speed train. The control performance of the system is evaluated. According to the requirement of the pressurization system A process model considering network delay and an adaptive PID control method based on the process model are proposed here. And it is shown that the proposed adaptive PID control method considering the network delay has on adequate feature compared to some other existing methods consequently it can be considered to be applied the pressurization system of korean high-speed train.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.461-464
• /
• 1999

To improve traction effort performance and stability for the Korean High-Speed Railway Train, practical re-adhesion controller including a novel anti-slip control scheme is proposed. The presented method is verified by train running simulation results based on induction motor vector control with PWM inverter.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1362-1364
• /
• 2000

This paper presents the control algorithm verification process for VCB (Vacuum Circuit Breaker) of Korean High Speed Train. In order to enhance the reliability of the control algorithm, the verification process must be performed. The verification is conducted by comparing the pre-designed control algorithm with the pre-planned scenario by simulation tools such as SDL and MSC. This verification process will be applied to the other control algorithms of various control units of Korean High Speed Train.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.235-237
• /
• 2005

철도차량에 취부되는 추진장치는 차량의 성능을 결정하는 매우 중요한 요소이다. 이러한 추진장치에 대한 다양한 성능을 평가하고 진단하기 위해 상시계측시스템을 구축하여 활용하고 있다. 이러한 계측장비들은 추진장치에 대한 계측 및 분석을 통한 시험을 평가하고 완성차 시험이나 본선시운전 시험시에 발생할 수 있는 고장원인을 찾아내고 해결하는데 많은 도움을 주고 있다 본 논문에서는 한국형 고속전철차량에 설치되어있는 상시계측시스템을 통해 추진장치에 대한 고장진단을 실시한 내용에 대하여 기술하였다.