• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.181-188
• /
• 1999

For weight reduction of the gearbox of power bogie of high speed train, aluminum alloy is recommended for the material of the gerabox case. In this paper, three models(Steel G/B Case-Steel BRG. Case[model-S], Aluminum G/B Case-Aluminum BRG. Case[model-A], Aluminum G/B Case-Steel BRG. Case[model-AS]) were compared to each other in the view of thermal expansion. The evaluation of the internal load, thermal expansion deformation and lug analysis were executed. It results that the 'model-A' is excessively deformed and fail in the bolt hole of bearing case. Material change of the bearing case to steel(model-AS) is effective to restrain the deformation of the inner radios of the bearing case and to prevent the failure of that.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.179-186
• /
• 1998

Three phase squirrel cage induction motor is generally adopted as a traction motor to drive high speed trains because of its robustness for surrounding environment and easy maintenance. In the design of traction molar, reduction of weight is very important in order to reduce kinetic energy to accelerate the vehicle. Therefore, in this paper, design variables of a preliminary designed traction motor to minimize its weight is determined using the optimization technique. Before the optimization process, rotor slot number is determined to reduce vibration and noise by the analysis of magnetic force. As a result, a design example to reduce weight by 12% than that of the preliminary designed motor is presented.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.187-193
• /
• 1998

An inverter-driven induction motor is used as the traction motor for a high speed drive system that required safty, reliability and performance and so on. rotor bar and end ring of the traction motor are the electrical equipments which form the conductive close loop and then induce current by interaction wi th the current of stator. the materials selection of rotor bar and end ring are seriously considered in the aspects of electrical and mechanical specification and Motor slip relation to inverter. Particularly motor slip guarantee the safty and reliability of induction motor. this paper show the material selection and the determining of slip in the design of traction motor for high speed train by analyzing the specifications of material being used currently.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.288-295
• /
• 1998

In this paper the system safety program plan(SSPP) for the development of Korea high speed railway system was presented. The plan for the design phase built up base upon MIL-STD 882C, manual for the development of rail transit system safety program plans by American Public Transit Association, and SSPP for Seoul-Pusan High Speed Rail project should be modified and then applied to the phases of manufacturing, test and commissioning. The plan deals with the safety program, the reference standards, the management and responsibility for the safety related activities, the methods to be used for early identifying safety critical items and functions and eliminating or controlling all hazards in a timely and cost-effective manner, and the documentation generated for safety assessment.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.369-378
• /
• 1998

When a high-speed train enters a tunnel, a compression wave is generated ahead of the train and propagates along the tunnel. This wave subsequently emerges form the exit portal of the tunnel, which causes an impulsive noise. In the present study, experimental investigation is carried out on the sonic boom noise with parameters of train speed, blockage ratio, nose shape of train and airshaft. These experimental results show that several countermeasures could be used to efficiently reduce the sonic boom. In addition, numerical analysis is performed to predict the sonic boom. The predicted sound waves are in a good agreement with the experimental results.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.542-549
• /
• 1999

The purpose of this study is to investigate stability of a high speed train and to propose optimal design using sensitivity analysis of suspension design parameters. A form of equations of motion in tangent track and curve track is obtained based on each creep force. Tangent track and curve track equations include lateral, rolling and yawing motions of wheel sets, bogies, and carbodies. Three track cases have been chosen to stability assesment of a high speed train analysis. Sensitivity equations are set up by directly differentiating the equations of motion. This study def'.led Stability performance index of a high speed train in tangent track and curve track. The relative magnitude of the effect of suspension parameters on the critical speed is computed, and by adjusting these parameters, the increase of the critical speed is achieved.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.54-60
• /
• 1998

PSC box bridges by MSS construction method in high-speed railway may not be cast in place at one step. Web and bottom flange(U member) in the cross section are cast in place at first, then top flange will be cast in place later with some time lag. In this section, stress distributions of U member and top flange are different with those in generally complete cast in place cross section. In the composite section composed of two different aged members, the redistribution of stresses takes place. This results from time-dependent strain characteristics of concrete and the effects of forces applied at the various stages. For comparison in the present paper, two models, one with the composite cross section and the other with generally complete cast in place cross section, are analyzed. The longitudinal stress differences of two models on considering construction stages are compared. As the analysis results show the considerable differences in the stresses of cross section between two models, the composition of cross section is considered for rational design of PSC box girder bridge.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.465-470
• /
• 2009

This paper discusses the numerical study on the dynamics of the high-speed EMU by developing the 34 degrees-of-freedom (DOF) lumped parameter model including the effect of the creepage. In order to reflect the creepage, the Kalker's wheel-rail contact theory is introduced in the proposed model. The dynamic analysis using $Matlab^{(R)}$ software is conducted, and its results are compared with those from ADAMS/Rail to investigate the validity of the proposed 34-DOF lumped parameter model. It is demonstrated that the results from the numerical study are similar to those from ADAMS/Rail. In addition, the critical design parameters of high-speed EMU are examined, and the design guidelines for reducing vibration and enhancing ride quality are proposed.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.535-544
• /
• 2009

Korea holds the High-speed EMU technique and produced to the forth in the world. Also, Preparing an advance opportunity to the world market. especially, We must develop the Original form individually to have competitive power about industrialized country of a high-speed train. This research proposed a design development process which consider interior design to enhance a line of flow and efficiency from implementation of shape about the Streamline nose.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.217-222
• /
• 2009

High-speed EMU under development vibrates more than a articulated high-speed train since power units are attached on each vehicle and railway vehicle. In this study, anisotropic equivalent stiffness of a aluminum extrusion plate were calculated to know and predict vibration characteristic of High-speed EMU under development. Eigen frequencies and modal shape of high speed train vehicle were calculated. And vibration generated was predicted at each position of vehicle when vehicle was operating.