• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.80-85
• /
• 2016

Carbon fiber-reinforced composite materials have been widely used in various industrial fields, but there are limits to increasing their strength and stiffness, because of the short-length fibers that are impregnated in them. In this study, a lab-scale small extruder system was developed with the capability to perform the carbon fiber impregnation and extrusion process in order to evaluate the properties of long-length carbon fiber reinforced thermoplastic composite materials molded by the LFT-D method. Specimens were made with the small extruder to press-mold long-length carbon fiber composite materials and evaluate their material properties. As a result, it was found that the carbon fiber length, press load and carbon fiber contents have a considerable influence on the strength and stiffness. Additional studies on such factors as the mixing screw design and coating of the carbon fiber are needed in order to improve the mechanical properties of carbon fiber composite materials.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.31-40
• /
• 2005

This study proposed a new yield function considering the spacing ratio of the critical state to predict the undrained shear behavior of anisotropic field ground. We have suggested a nonassociated constitutive model that used a newly modified plastic potential function in order to apply the yield function of the modified Cam-Clay model to the anisotropic consolidation. In this paper, we predicted undrained shear behavior of the remolded weathered mudstone soils in Phohang isotorpically and anisotropically consolidated using the suggested model. To evaluate the reliability of proposed model, we predictied undrained shear behavior of Bankok Clay isotropically, nomally consolidated and Drammen Clay Ko consolidated. The predicted results are consistent with the observed behavior.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.914-922
• /
• 2003

In this paper, the strain localization of voided ductile material has been analyzed by nonlocal plasticity formulation in which the yield strength not only depends on an equivalent plastic strain measure (hardening parameter), but also on the Laplacian thereof. The gradient terms in yield criterion show an important role on modeling strain-softening phenomena of material. The influence of the mesh size on the elastic -plastic deformation behavior and the effect of the characteristic length parameter for localization prediction are also investigated. The proposed nonlocal plasticity shows that the load -strain curves converge to one curve. Results using nonlocal plasticity also exhibit the dependence of mesh size is much less sensitivity than that for a corresponding local plasticity formulation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.45-52
• /
• 1998

This study is to investigate the effects of warm deep drawing with aluminum sheets of A1050-H16 and A5052-H32 for improving deep drawability. Experiments for procucing circular cups and square cups were carried out for various working conditions, such as forming temperature and blank shape. The limit drawing ratio(LDR) of 2.63 in warm deep drawing of circular cups in case of A5052-H32 sheet, whereas LDR of A1050-H16 is 2.25, could be obtained and the former was 8 times higher than the value at room temperature. The maximum relative drawing depth for square cups of A5052-H32 material was also about 2 times deeper than the depth drawn at room temperature. The effects of blank shape, and temperature on drawability of aluminum materials as well as thickness distribution of drawn cups were examined and discussed.

• Computational Structural Engineering
• /
• v.9 no.4
• /
• pp.141-154
• /
• 1996

Delaunay triangulation is a very powerful method of mesh generation for its versatility such as handling complex geometries, element density control, and local/global remeshing capability, The limit of generating simplex elements(3-node elements in 2-D) only is resolved by adding generation module of 6-node quadratic elements. Since proposed adjacency does not change from 3-node element mesh to 6-node mesh, generation module can utilize the original simplex element generator. Therefore, versatility of the Delaunay triangulation is preserved. A simple upsetting problem is employed to show the possibility of the algorithm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.3
• /
• pp.249-256
• /
• 1983

The study is concerned with the analysis of sheet metal for the prediction of limit drawing ratio and forming load. The direct redrawing process is analyzed by using an equilibrium approach and strain increment theory both for non-workhardening material and for workhardening material. Computations are carried out numerically for the workhardening case. Limit drawing ratios are predicted for some chosen variables. The forming loads are also computed with respect to punch travel. Then the predicted loads are compared with the experimental results. For ordinary lubricated conditions, the comparison shows reasonable agreement between the theory and experimental observation. It is also shown that limit drawing ration can be increased by using a greater die angle and proper lubrication significantly reduces the punch load. Finally numerical results show that material of greater R-value and strain-hardening exponent(n)is better for direst redrawing of sheet metal.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.952-956
• /
• 1997

This paper describes the method that can expand the forming limit of T type forging products used in aircraft and automotive forged products. The forming limitis determined by the ratio of web thickness to rib width in T type and the reduction in height of workpiece and especially depends on the ratio of web thickness to rib width. For this method, the geometric condition that consists of triangle type was introduced and FEM simulations and model exoeriments were carried out and compared with each other. The objective of this paper is to give the method not only that sink mark and folding phenomenon are eliminated but also that the forming limit and the structural strength of rib and web is increased.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.145-151
• /
• 1998

Unlike the drawing of round section from round bar, the shaped drawing like polygonal section is known to have influence not only drawing stress but also corner filling. Therefore. this study analyze the drawing process of suqare rod from round bar using nonsteady state rigid-plastic FEM. To investigate effects of process variables of the drawing process of square rod from round bar, FE-simulations with variety of reduction in area and semi-die angle for a given frictional condition have been conducted. By this results, it has to suggest optimal process condition on the drawing stress and the corner filling. In addition, it has determined forming limit considering necking and bulging.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.7-18
• /
• 2002

Generally, natural soils are affected by one-dimensional consolidation so that the behavior characteristic could be somewhat different from the isotropic consolidation specimen. But, due to experimental difficulties and the lack of equipment, the isotropic triaxial tests are mainly performed in most lab. tests. So it seems to be very effective if it is possible to predict pore water pressure and undrained shear strength in the $K_o$ state as the results of isotropic triaxial consolidation test. In this study, isotropic triaxial consolidation test and $K_o$ triaxial consolidation test were performed and we obtained parameters related to pore water pressure ratio using the Hyperbolic model. And then we predicted the behavior of pore water pressure that occurred in the $K_o$ state from the results obtained in the isotropic triaxial cosolidation test through the equation suggested by Lo(1969). It is possible to seize the validity of Lo(1969) equation. Also, considering undrained shear strength obtained from consolidation method in relation with water content, we find that consolidation method have an effect on undrained shear strength. Finally, using the Wroth(1984) equation that is based on the theory of critical state, undrained shear strength in the $K_o$ state was predicted from that of the isotropic triaxial consolidation test. The usefulness of the equation was verified by comparing the predicted value with experimental results.

• 순환기질환의공학회:학술대회논문집
• /
• 2005.12a
• /
• pp.25-26
• /
• 2005

동맥경화의 재발생 위치는 속도와 전단응력 등과 같은 혈류역학의 인자들의 영향을 많이 받는 혈관형태를 가진 영역이다. 이러한 결과는 관상동맥에 동맥경화의 발생빈도를 조사한 결과와 일치하고 있으며, 즉 좌전 하행지, 회선지, 및 우관동맥 등의 동맥경화성 병변 발생빈도에서 좌전하행지가 가장 많은 빈도를 나타낸다. 따라서 동맥경화의 발생 및 재형성은 혈관의 동맥경화성 위험지역의 형태적 특징, 즉, 분지부의 위치, 길이, 각도의 변화 등에 따라 달라질 수 있음을 시사한다. 동일한 관상동맥이더라도 동맥경화의 발생이 용이한 형태가 있는데, 혈관의 형태학적 특성에 따란 혈류역학적 특성이 달라지고 동맥경화가 발생할 수 있는 가능성이나 진행과정이 차이가 날 수 있음을 말한다. 특히 임계치를 넘는 고전단응력은 혈관내피세포를 파괴하거나 손상을 주며, 반대로 임계치 미만의 저전단응력은 혈류의 정체시간을 길게 하여 양쪽 모두 동맥경화성 생물학적 반응을 유발 할 수 있며, 고전단응력과 저전단응력의 빈번한 맥동성 변화작용으로 혈관이 손상될 수 있는 한계범위를 넘어서게 될 때 내피세포의 방어체계를 파괴시키거나 혈관성형술후의 신내포세포 형성과정에서 생물학적 활성반응을 촉진하게 되는 환경을 제공하게 되어 동맥경화를 촉진한다고 할 수 있다. 즉 임계치 이상의 고전단응력이 나타나는 형태와 입구경계조건이 발생되면 내피세포 손상에 따른 혈전 현상의 발생가능성이 높아지며, 임계치 미만의 저전단응력이 발생되면 동맥경화성 죽상반 재형성에 영향을 미치게 한다. 결론적으로 동맥경화의 재발생의 기전은 변형된 혈관의 형태학적인 차이와 위치에 따라 서로 다른 혈류역학적 유발할 수 있는 물리적 환경을 제공하는 데에서 출발한다고 할 수 있다.$8.0{\sim}8.3$으로 알카리 쪽으로 이동하였다. 파일롯트 규모로 본 고정화 효소 충전탑(내경 30cm, 높이 85cm)에 의한 이성화당의 생산을 시도하였던바, 고정화 효소(350 IXIU/ml-R) 1리터가 30일동안에 약 293리터의 이성화당을 생산할 수 있는 것으로 나타났다.l plane에서 선수군(選手群)이 $62.7{\pm}7.36^{\circ}$로서 비선수군(非選手群)과 별(別) 차이(差異)가 없었고, horizontalplane에서는 선수군(選手群)이 $-23.5{\pm}7.2^{\circ}$로서 비선수군(非選手群)의 $-38.8{\pm}8.2^{\circ}$에 비(比)해 유의(有意)하게 높았으며 운동후(運動後) 양군(兩群) 모두 유의(有意)하게 높았다. QRS vector 길이에서 Frontal plane에서 선수군(選手群)이 $13.86{\pm}1.44\;mm$로서 비선수군(非選手群)의 $9.62{\pm}0.97\;mm$에 비(比)해 유의(有意)하게 높았으며 운동후(運動後)에도 유의(有意)하게 높았다. Horizontal plane에서도 선수군(選手群)이 $19.82{\pm}2.10\;mm$로서 비선수군(非選手群)의 $16.90{\pm}1.39\;mm$에 비(比)해 유의(有意)하게 높았고 운동후(運動後)에도 선수군(選手群)이 유의(有意)하게 높았다. 이상(以上)을 종합(綜合)해 보면 선수군(選手群)의 R파고(波高)가 비선수군(非選手群)에 비(比)해 운동후(運動後) 계속(繼續) 유의(有意)하게 높았고, $Rv_5$