• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.3
• /
• pp.273-287
• /
• 2006

This study investigates the failure mechanism and load-carrying capacity of a single-shell lining which has no disturbance in transfer of shear force, with respect to a conventional double-shell lining which has separation between layers of shotcrete lining and secondary concrete lining by water-proof membrane. In order to evaluate the capacity, a 2-D numerical investigation is preliminarily carried out and then real-scale loading tests with tunnel lining section specimens are performed on the condition given by the numerical investigation. In the test, a concentrated load is applied for considering a released ground load or rock wedge load. Through this study, it appears that the single-shell lining takes the load-bearing capacity 20% higher than in case of the double-shell lining. In addition, a possibility of a composite single-shell shotcrete layer composed by multiple bonded layers partly involving different contents of high-capacity additives is shown thereby leading to use of less amount of the high-capacity additives on the condition of taking a similar load-bearing capacity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.95-95
• /
• 2004

철도차량용 주행장치인 대차는 차체의 하중을 지지하고, 승객 및 차량의 안전, 주행성능 및 승차감에 지대한 영향을 미치는 핵심 구조부품이다. 주행장치는 크게 대차틀, 차륜 및 차축, 1차 2차 현가장치, 제동장치, 전동기 및 동력전달장치 등으로 구성되며, 대차틀은 형상이 복잡하고 하중을 직접 지지할 뿐만 아니라 하중조건도 정적 및 동적하중이 복합적으로 작용하고 있다. 대차틀은 차체 자중 및 승객 하중에 의한 정하중과 곡선주행, 제동시 발생하는 하중 및 불규칙한 선로와 차체, 주행장치, 윤축의 운동모드에 의한 동하중을 받고 있다.(중략)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.2
• /
• pp.66-73
• /
• 2021

In the existing study of steel beams with openings, openings are located at a location where the distance to the support point is equal to or greater than the section height. Considering the facilities using the openings in the steel beam, the distance from the opening to the support point may be closer than the height of the beam section. Therefore, research on this is needed. This study is an experimental study to understand the structural performance of beams with openings close to the ends subjected to Cyclic Loading. In addition, in this study, we want to understand the structural performance through experiments on beams with openings reinforced with vertical or horizontal steel plates.

• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.82-88
• /
• 2010

Major structural elements such as columns and beams are designed to withstand the vertical and horizontal loads. Futhermore, when the structural elements were engulfed with fire the structural stability should be stand without failure. The beams have been developed in aspects of structural stability but an evaluation of fire performance was not done. So the data of fire resistance performance of beams filled with concrete at web on H-section is not known. The purpose of this paper is to analyse the correlation between temperature analysis and fire test with the beams and to show the fire resistance performance with two methods.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.71-77
• /
• 2021

As the number of using road in Korea increases, maintenance costs and traffic congestion costs also increase. In order to reduce maintenance cost and time of road, existing long - lived modular road system has been proposed. In this study, the design and performance evaluation of the adaptable support module, which is the substructure of the proposed system, was performed. Two adaptable (Cross-Beam type)support modules were designed and fabricated to determine the load and shape. A adaptable support module was constructed and a static load test was carried out to select the type with better performance. As a result of the load test, the maximum value of the measured earth pressure difference is about 158 kPa and the settlement amount is about 0.032 mm in the two types of adaptable support modules. Based on these results, it is concluded that the performance of the adaptable support module of the bottom curved cross-beam type is better.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.1
• /
• pp.37-44
• /
• 2023

In this study, the performance of the support modular system, as substructure of the proposed sustainable-perpetual modular road system to reduce road construction time and maintenance costs was evaluated. A modular road system consisting of 4 support modular cross-beams with a lower curved surface was constructed on the test-bed. Six load cells and eight LVDTs were installed in the center part of two cross-beam support modular systems. Two loads, 50kN and 100kN, were applied to 15 points on the pavement slab to measure the load and displacement occurring in the modular road system. The measured displacements were less than 1 mm, so it is considered that there was no problem in the stability of the actual road. When comparing the two applied loads and the measured loads in the field test, it was considered that the load transmitted to the ground under the support modular system is very small. It is considered that the modular road system with the support modular system is applicable to the actual road site.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.12
• /
• pp.13-22
• /
• 2013

A substructure of bridges is very important structural element for safety and supporting not only vertical loads as dead load and live load but lateral loads as break load, wind load, seismic load, hydrostatic pressure and dynamic water pressure, lateral earth pressure, impulsive load, temperature change and load effect of temperature change, creep and shrinkage. Most of domestic bridges are reinforced concrete piers and have an effect on economy of bridge. Recently, understanding importance of substructure, we are getting more interested in new substructure system.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.71-75
• /
• 2003

최근 특별한 연약지반 처리공법을 적용하지 않고 자중을 감소시키고 구조적인 특성을 이용하여 연약지반 위에 설치하는 방파제가 제안ㆍ개발되고 있다. 일본에서는 자중을 가볍게 하고 파랑 하중을 역T형 구조와 말뚝을 이용하여 지지하는 구조를 시공한 사례도 있으며(문사강지 등, 1989), 국내에서는 Fig. 1과 같이 역T형 콘크리트 방파제의 자중만으로도 과도한 압밀침하가 발생되는 아주 연약한 지반에서 방파제의 자중을 줄이기 위해 부력통을 설치하고 설계 하중은 지중에 벽체를 설치하여 지지하는 구조를 제안하고 그 성능을 평가한 바 있다(권오순 등,2001 ; 권오순 등, 2002). (중략)

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1990.11a
• /
• pp.69-72
• /
• 1990

최근의 전자및 광학기기 분야에 있어서의 준부신 발전은 다면경 가공기나 초정밀 절삭, 연삭기와 같은 초정밀 가공기계의 개발과 실용화에 힘입은 바 크다. 이러한 초정밀 가공기의 성능을 좌우하는 핵심 요소로서 주축계를 들 수 있으며, 비교적 소형 경량의 공작물을 가공하는 기계의 주축용 베어링으로는 볼 베어링이나 오일 베어링을 대신하여 공기베어링이 점차 널리 사용되고 있다. 일반적으로 주축으로 사용되는 베어링은 원통형 레이디얼 베어링과 원판형 스러스트 베어링이 결합된 형식이 주류를 이루나 이러한 베어링은 스러스트 판과 축의 직가곧 가공오차가 존재하기 때문에 가공하기는 쉬우나 회전시에 의의 영향에 의해 회전 정밀도 유지가 어렵다는 단점을 지니고 있다. 이러한 단점을 보완하기 위하여 사용되는 베어링에는 원추형(conical) 베어링과 구면형(spherical) 베어링이 쓰이고 있다. 이러한 원추형 베어링과 구면형 베어링은 가공오차를 베어링과 축의 현압 연마로써 없애줄 수 있으며 베어링이 축방향 하중과 경방향 하중을 동시에 지지하여 줌으로써 기계 전체의 부피를 줄이고 회전 정밀도를 향상시켜 주는 것으로 알려져 있다. 그러나 구면의 베어링 간극을 정확히 가공하기 어려운 단점이 있어 축과 베어링을 현압연마하여 가공한 후에 두부품을 중심선상에서 분리시키므로써 요구되는 간극을 얻을 수 있는 원추형 베어링이 많이 쓰이고 있다. 본 연구에서는 직접 수치 해법을 이요하여 원추형 베어링의 유막내의 압력 분포를 계산하고 이 합력인 하중지지 용량이 축방향 하중과 경방향 하중을 지지하는 특성을 이론적으로 검토하여 외부 가압 원추형 베어링으 특성수를 파악하여 설계자료를 제시하고자 한다.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.8-13
• /
• 2010

Satellite structure should be designed to accommodate and support safely the payload and equipments necessary for its own missions and to secure satellite and payloads from severe launch environments. The launch environments imposed on satellites are quasi-static accelerations, aerodynamic loads, acoustic loads and shock loads. Especially when optical payload is accommodated, satellite structure usually adopts the optical bench consisting of composite material not only to support and secure but also to guarantee good pointing stability against extreme thermal environments. This paper deals with optical bench and support structure which shall be designed to minimize the loads transferred to optical payloads from satellite.