• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.2
• /
• pp.129-135
• /
• 1999

The telemetry system for the current speed and direction, the underwater ambient noise and the distribution ecology of fishes was constructed by the author and his collaborator in order to product and manage effectively in shallow sea culture and setnets fisheries, and then the experiments for the telemetry system carried out at set net fishing ground located Nungpobay in Kojedo from October 1996 to June 1997. As this results, the techniques suggested in the telemetry system gave full display its function even though far away 1.5 km from transmitting part, but with the suggested telemetry system could not be ascertained relationship between physical environment and distribution ecology of fishes.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.682-687
• /
• 1999

The destruction of tissues by volume increase at food freezing is accepted as one of the factor responsible for quality damage. For this reason, the internal pressure developed in meats were investigated with a pressure transducer during freezing, frozen storage and thawing. Increasement of 6.33% for volume and $942.17\;kg/cm^2$ for density at $-20^{\circ}C$ for beef were shown. In quick and slow freezing of beef, internal pressure reached to highest point after reached to the lowest point at initial of the zone of ice crystal formation. The internal pressure was approximately $8{\sim}10\;psig$ and pressure difference was about 1 psig, which was bigger in immersion freezing than that of still-air freezing. During frozen storage of pork, internal pressure of $1.84{\sim}2.32\;psig$ occurred repeatedly as a function of sample weight at material temperature difference of ${\pm}1^{\circ}C$. The internal pressure during thawing of pork was decreased slowly after rapid increase to the maximum for less than 5min at the beginning of thawing. Internal pressure value at thawing was higher than that at freezing in most cases. Internal pressure of beef with thermal equalized freezing was about $1{\sim}4\;psig$, which was lower than that of non-thermal equalized freezing. Also, freezing time was shortened to $10{\sim}20%$.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.4
• /
• pp.321-333
• /
• 1997

This paper describe on the transmitting/receiving functions and the monitoring effects for the telemetry system which is designed to monitor the environmental condition of a culturing fishery ground inside a bay. The telemetry experiments were carried out by the telemetry system which constructed with the sea water temperature/salinity measuring sensor and telesounder at culturing fishery ground located in the coast of Sangyang-Myon, Kyongsangnam-Do province from October, 1995 to May, 1996. The results of this experiment showed that the developed telemetry system could be used for monitoring the sea water temperature/salinity and the distribution of fish in culturing fishery ground.

• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.135-144
• /
• 2013

Blue-green algae blooms occurred during early winter in the North-Han River, Korea. Among blue-green algae, Anabaena spiroides were observed for approximately 33 consecutive days, between 28 November and 30 December, 2011. A. spiroides emerged from Lake Uiam to Lake Paldang, depending on the flow of the river has spread downstream. Changes of physical water environment like rising water temperature and increasing hydraulic retention time influenced the A. spiroides bloom. The A. spiroides bloom showed a very rapid increase in cell density, and a slow decrease: the cell density increased to a maximum of $11,325cells\;mL^{-1}$ in Lake Paldang (st. 5), and was completely disappeared after the water temperature dropped below $4^{\circ}C$. A decrease in water temperature was the most influential factor among all environmental parameters, for the reduction of A. spiroides cell density. The A. spiroides bloom was accompanied with the occurrence of very high concentrations of the odor metabolite geosmin. Geosmin reached the peak value of $1,640ng\;L^{-1}$ in Lake Paldang (st. 4). The geosmin concentration was very strongly correlated with cell numbers of A. spiroides.

• Journal of Korea Water Resources Association
• /
• v.50 no.12
• /
• pp.827-836
• /
• 2017

The most important parameters of the Muskingum method, widely used in hydrologic river routing, are the storage coefficient and the weighting factor. The Muskingum method does not consider the lateral inflow from the upstream to the downstream, but the lateral inflow actually occurs due to the rainfall on the watershed. As a result, it is very difficult to estimate the storage coefficient and the weighting factor by using the actual data of upstream and downstream. In this study, the flow without the lateral inflow was calculated from the river flow through the hydraulic flood routing by using the HEC-RAS one-dimensional unsteady flow model, and the method of the storage coefficient and the weighting factor calculation is presented. Considering that the storage coefficient relates to the travel time, the empirical travel time formulas used in the establishment of the domestic river basin plan were applied as the storage coefficient, and the simulation results were compared and analyzed. Finally, we have developed a formula for calculating the travel time considering the flow rate, and proposed a method to perform flood routing by updating the travel time according to the inflow change. The rise and fall process of the flow rate, the peak flow rate, and the peak time are well simulated when the travel time in consideration of the flow rate is applied as the storage coefficient.

• Microbiology and Biotechnology Letters
• /
• v.3 no.2
• /
• pp.63-68
• /
• 1975

A biological active substance was isolated from the cultured medium of Streptomyces sp. and its biochemical characteristics were investigated. Isolation process of the substance was as follows; the pH of filterate of the cultured medium was adjusted to 3.0 with N-hydrochloric acid and saturated with sodium chloride, then chloroform was added to this filterate in one fifth portions and stirred vigorously. After extracting the active substance with chloroform in 3 stages, the chloroform layer combined and evaporatea after dehydrating with sodium sulfate. The substance was found to be to be toxic to various fresh water fishes; the lethal dose for an average size Pseudorasbora parva T. et. S. was 50ug per ml. In the acidic condition, the toxicity of the substance remained fora long time, while in the alkaline state, the toxicity was decreased very fast. This substance was found to be stable to organic solvents, but labile to heat treatment. The maximal revival time of Pseudorasbora parva T. et. S. was about 20 minutes in 25 ug/ml of the substance solution.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.309-316
• /
• 2015

The contribution of exterior devices such as bogie fairings and pantographs to running resistance was estimated on the basis of coasting tests at up to 350 km/h with the help of the Korean Next Generation High speed train (HEMU-430X). In order to assess the reduction of air resistance by nose car's bogie fairing, coasting tests were conducted with a removable bogie fairing at various speed ranges. And, the contribution of the pantograph to air resistance was also estimated with coasting tests that include the pantograph's rising and descent modes. The linear regression method was used to examine decelerations from time-velocity data and the equation of resistance to motion is proposed from the deceleration data. From the aerodynamic term of the equation of resistance to motion, the contribution to air resistance by nose car's bogie fairing and pantograph was estimated. The results show that the air resistance was reduced by about 3.8% by the nose car's bogie fairing. And, the 3.9% increase of air resistance by the pantograph (open knee mode) has been found.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.3
• /
• pp.196-202
• /
• 2003

We investigated the effect of both 4 types additives and $0.5wt\%\;Pb_3O_4$ which have been reported to show an improvement on the performance of Zinc anode. And Experimental methods such as corrosion potential measurement, potentiodynamic polorization test and charging-discharging cycle life test were carried out in $40 wt\%$ KOH with $Pb_3O_4(0.5, \;10\;&\;2.0wt\%)$ and 4 types additives $(0.4wt\%\;of\;Ca(OH)_2$, 0.025M of Citrate, Tartrate and Gluconate). Corrosion potential was shifted to high direction and also changed to high and low direction repeatedly with increasing of $Pb_3O_4$ quantity. However by adding $0.5wt\%\;Pb_3O_4$, corrosion potential shifted to low direction and showed stable condition. Furthermore it was well known that corrosion resistance was predominantly increased compared to no addition and improved charging-discharging property with adding additives. By SEM analysis, it was concluded that the morphology of surface in case of only $0.5wt\%\;Pb_3O_4$ addition was nearly the same as that of Tartrate additive and in the other additives such as $Ca(OH)_2$, Citrate, Tartrate and Gluconate, their morphologies showed dendrite growth. Eventually it was thought that the additive of Tartrate indicated comparatively good corrosion resistance effect as well as charging-discharging property improvement among those four types additives.

• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.269-275
• /
• 2018

In order to establish the criterion for analyzing outdoor weather conditions in the greenhouse heating and cooling system design, we analyzed heating and cooling design outdoor temperatures by the annual percentile method and compared with design outdoor temperatures by the existing seasonal percentile method. In the annual percentile method, 0.4%, 1% and 2% of the total 8,760 hours per year are presented as cooling design outdoor temperatures and 99.6% and 99% as heating design outdoor temperatures. When the annual percentile method was adopted, heating design outdoor temperatures increased by 6.7 to 9.6% compared with the seasonal percentile method, and cooling design outdoor temperatures decreased by 0.6 to 1.1%. The maximum heating load in the same greenhouse condition decreased by 3.0 to 3.6% when the annual percentile method was adopted, but the effect on the maximum cooling load was insignificant. Therefore, it is necessary to consider the change of heating design outdoor temperatures to the annual percentile method, but it is not necessary to change the cooling design outdoor temperatures since there is little difference between the two methods.

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.121-130
• /
• 1993

The GaP crystals were grown by synthesis solute diffusion method and its properties were investigated. High quality single crystals were obtained by pull-down the crystal growing ampoule with velocity of 1.75mm/day. Etch pits density along vertical direction of ingot was increased from 3.8 ${\times}{10^4}$c$m^{-2}$ of the first freeze to 2.3 ${\times}{10^5}$c$m^2$ of the last freeze part. The carrier concentration and mobilities at room temperature were measured to 197.49cc$m^2$/V.sec and 6.75 ${\times}{10^{15}}$c$m^{-3]$, respectively. The temperature dependence of optical energy gap was empirically fitted to $E_g$(T)=[2.3383-(6.082${\times}{10^{-4}}$)$T^2$/(373. 096+TJeV. Photoluminescence spectra measured at low temperature were consist with sharp line-spectra near band-gap energy due to bound-exciton and phonon participation in band edge recombination process. Zn-diffusion depth in GaP was increased with square root of diffusion time and temperature dependence of diffusion coefficient was D(Tl = 3.2 ${\times}{10^3}$exp( - 3.486/$k_{\theta}$T)c$m^2$/sec. Electroluminescence spectra of p-n GaP homojunction diode are consisted with emission at 630nm due to recombination of donor in Zn-O complex center with shallow acceptors and near band edge emission at 550nm. Photon emission at current injection level of lower than 100m A was due to the band-filling mechanism.