• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.186-191
• /
• 2002

실시간 온라인 계측에 의한 순환식 양액조제 알고리즘을 위해서 이온센서를 사용하였다. 이온센서의 내구성이 약하고 배양액 내에는 이온센서의 정확한 계측의 방해요인인 이온성분들이 포함되어 있기 때문에 매번 정확한 측도 설정을 수행 해줌으로써 계측값의 신뢰도를 높일 수 있었고 이온센서를 이용한 온라인계측의 가능성을 확인할 수 있었다. 그러나 배양액 속에 장시간 넣어둔 상태로 사용하였을 경우 4시간 이상 경과하면 센서에서 나오는 신호가 지속적으로 상승하는 경향을 보였다. 장시간 동안 배양액에 노출되었던 센서는 측도설정이 불가능한 수준으로 일정농도의 용액 내에서 일정한 값을 나타내지 못하고 계측값이 지속적으로 상승하던가 하강하여 한계값 까지 이르렀다. 이러한 이유로 연구용이 아닌 실제 장치에 적용하여 실용화하기 위해서는 내구성이 강하고 계측하고자 하는 이온에 대해 영향을 주는 방해이온 속에서도 정확도를 유지 할 수 있는 센서의 개발이 선행되어야 한다. 또한 정확한 퇴액 성분의 측정을 위해서는 측도 설정이 선행되어야 하는데 계측이 필요할 때마다 측도 설정을 자동으로 해줄 수 있는 자동 측도 설정 모듈의 개발도 수행되어야 할 것으로 사료된다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.4 no.1
• /
• pp.25-38
• /
• 1996

본 연구에서는 항공기 사고의 70%이상을 차지하는 이 ${\cdot}$ 착륙단계 중에서, 이륙 직후 저고도에서 동력이 상실되었을 경우에 이륙활주로 방향으로 Turning Back하는 것은 어떠한 안전 한계를 지니고 있는지를 알아보기 위하여, 우선 조종사에 대한 설문 조사를 실시하여 비행 경력별로 이륙 직후 동력 상실시의 비상 처치 경향과 위험에 처할 확률을 조사하였다. 그리고 실제 활공 성능이 우수한 M20J 항공기와 기동 성능이 우수한 FH20 항공기를 이용한 비행 시험을 통하여 이륙 직후 Turning Back to Runway조작 시의 고도 손실과 선회시 하강율을 실험 자료로 구하였다. 비행 시험 자료를 비교 적용함은 물론 선회 소요 시간과 고도 손실, 선회율과 활공 속도와의 관계 등의 항공 역학적 이론을 적용한 분석 근거에 기초하여 안전하게 Turning Back to Runway 조작을 시작할 수 있는 안전 고도 한계 및 선회율을 제시하였다.

• Journal of Animal Science and Technology
• /
• v.51 no.4
• /
• pp.265-272
• /
• 2009

A total of 486 milk records were collected from 16 diary farms in Imsil-gun, Jeollabuk-do. Results obtained were as follows: The average 3MG (amount of milk within the first three minute) was 7.44 kg and 55% of total milk yield was produced within 3 min. The average of SPL (% of foam in milk) was 33.93% and the average of MNG (strip yield) was 0.14 kg, which was less than 1% of total milk yield. The averages of HMF (highest milk flow), HMG (maximum milk flow rate in one minute) and DMHG (average milk flow in the main milking phase) were 3.03 kg/min, 2.94 kg/min and 2.05 kg/min, respectively and the average milking speed in Imsil-gun was slower than other regions. The average of tS500(time to reach 0.5 kg/min at beginning) was 0.23min (about 14 seconds) and that of tMGG (duration of the total milking) was 7.75min. The average tMBG (duration of the dry milking phase) was 0.58 min (35 seconds) and that of tMNG (duration of the stripping phase) was 0.42min (14 seconds). The averages of ELHMF (electrical conductivity at highest milk flow) and ELAP (beginning peak level of the electrical conductivity) were 6.81 mS/cm and 7.58 mS/cm, respectively. The average of ELMAX (maximum electrical conductivity) was 7.48 mS/cm and that of ELAD (beginning peak difference of the electrical conductivity) was 0.61 mS/cm. While the total milk yields for DMHG, tMHG (duration of the main milking phase), tPL (duration of the plateau phase), tAB (duration of the descending phase) and tMGG were positively correlated (0.35~0.54), those for tMBG and SPL were negatively correlated (-0.11 and -0.27). As the DMHG increased, tMHG, tPL, tAB, tMGG and SPL decreased. While the cows with higher electrical conductivity at the beginning of milking had less somatic cell counts, cows with higher electrical conductivity after the peak of milk yield had more somatic cell counts. The results of this experiment indicated that through milking based on milking and lactating standards and the regular checking of milking status, the qualities of milk and milk yields could be improved.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.60-66
• /
• 2018

For new use development of carbonized board, we investigated the effect of carbonization temperature on the surface temperature of carbonized board manufactured from a plywood, particle board, MDF, and wood of Fraxinus rhynchophylla at different carbonization temperature ($400^{\circ}C{\sim}1100^{\circ}C$). The surface temperature of carbonized board precipitously increased until 12 minutes elapsed, after smoothly increased and thereafter which were stable after 20 minutes. The higher carbonization temperature increased density of carbonized board and surface temperature of carbonized board so that density is considered to influence surface temperature change. Moreover, carbonized boards kept heat for a long time because the descent velocity of carbonized boards' surface temperature was slower than that of heater's.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.4
• /
• pp.81-92
• /
• 2014

The integrity evaluation of river levee includes slope stability evaluation of riverside land and protected low-land, and safety of piping with respect to critical gradient and critical velocity based on related regulations, such as Design Criteria Rivers Commentary (2009), Structural Design Criteria Based Commentary (2009). The design hydro-graph is the most important design input factor for the integrity evaluation; it can be inaccurate due to the absence of its decision methods suggested by the national level. The authors in this paper evaluated numerical analytic levee integrity for piping and slope stability by changing each design hydro-graph, including rising ordinary water level, lasting flood water level, falling water level, and flood frequency for Mun-san-jae on Nak-dong River. Finally, the authors suggested that the levee integrity of piping and slope stability are very sensitive to the changes of increasing time of ordinary water level by 57 hours and lasting time of the flood water level by 53 hours, respectively, for Mun-san-jae.

• Journal of the Korean earth science society
• /
• v.26 no.6
• /
• pp.541-550
• /
• 2005

Molluscan shells were sampled from the continental shelf of South Sea: 19 stations in the southeast continental shelf and 5 in the southwest sea, in order to understand characteristics of sea level changes and time-averaging since the last glacial age. Radiocarbon dates were made on 42 dominant and specific species which were sampled from 24 stations. Time-averaging was observed and showed to be 11,939 years in age difference. The sea-level ranged from 150 to 160 m below sea level during the LGM (about 15,000 yrs B.P). The sea-level significantly rose to 60 m at around 9,000 yrs B.P. and became stable at 50 to 60 m between periods between 4,000 and 5,000 yrs B.P. Between 3,000 and 4,000 yrs B.P, the sea-level rapidly rose to a depth of $10\~20m$ below today’s present sea level.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.173-182
• /
• 1993

This paper presents an algorithm to derive the representative unit hydrograph for the real environment of a watershed. For a given watershed, the conventional methods give several different unit hydrographs by storm events. In this study the LP model is somewhat modified based on the previous study by Mays et also as follows: the objective function is designed to minimize the sum of weighted residuals. An additional constraint of moving average is added to prevent the unit hydrograph from the occurence of oscillation which was not active in Mays's paper. Configuration of rainfall matrix was improved to reduce its dimension in accordance with Diskin's review point. In spite of the superiority of LP approach in terms of representativeness, all the methods were very sensitive to the validity of baseflow separation and rainfall-loss. Several methods of the separations for rainfall excesses and direct runoffs were applied and no preferred methods were identified. This is the matter of judgement considering catchment and rainfall characteristics. This algorithm was applied to a real watershed of the Wi stream in the Nak-dong river. Compared with the IHP results by conventional methods, this optimized representative unit hydrograph demonstrated relatively smaller and shorter values in terms of the peak discharge and the basin lag respectively, and the oscillation of its falling limb successfully eliminated owing to the additional constraints of moving averages.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.383-387
• /
• 2014

In this paper, for a new detection system development with the better accurate dose evaluation and beam distribution imaging using the small field irradiation of linear accelerator, the compound semiconductor based detection sensors were fabricated and the performance evaluation was investigated. The special particle-in-binder sedimentation was used for a large area film sensor fabrication. The detection properties for high energy x-rays were investigated from a dark current, an output current, a rising time, a falling time, and response delay measurement. The experimental results, the $TiO_2$ mixed $HgI_2$ sensor showed the best electrical characteristics than $PbI_2$, PbO, pure $HgI_2$. Linearity, repeatability, and accuracy tests from LINAC were tested, the $TiO_2$ mixed $HgI_2$ sensor showed the better performance than the commercially available dosimetry devices.

• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.417-427
• /
• 2004

The horizontal collector well is used to treat some weak points of the vertical well in the bank filtration site. In this study two empirical formulas(Milojevic and Petrovic) are selected to examine the applicability for calculating the yield of the horizontal collector. And they are compared with the compute simulation results for multiple wells. Milojevic empirical formula which considers the conditions such as aquifer, well location, the diameter of screen etc. is more applicable than Petrovic formula. Draw-down characteristics of horizontal collector was well simulated by using the computer simulation for multiple wells. The results are well agreement with Milojevic formula, and the draw-down and the retention time of the horizontal collector can be controlled by adjusting the angle of lateral screens.

• Journal of Yeungnam Medical Science
• /
• v.11 no.1
• /
• pp.167-180
• /
• 1994

In order to inquire the most effective management of increased intracranial pressure(ICP), mannitol, steroid and hyperventilation were used in rabbits after ligation or non-ligation of the carotid artery. Mannitol was more effective than steroid and hyperventilation in the degree of the reduction of ICP. The intracranial pressure was decreased 43~45% for 25~30 minutes after injection of mannitol. Steroid was less effective than mannitol in the degree of the reduction of ICP. But the time of reduction of ICP was longer, that is, the degree of reduction was 24~60 minutes after injection of steroid. Hyperventilation is effective in the initial time only, for 10 minutes after hyperventilation. The degree of ICP reduction was 13.5~16.7% for 10 minutes after hyperventilation. The combined group, that is three kinds of mangenent were used, is the most effective treatment to reduce ICP of ICP. The degree of the reduction of ICP was 42.1~49.3% for 20 minutes, 47.7~52.5% for 30minnutes. There was no significant difference between ligation and non-ligation group.